AJA’s RovoRx-SDI is an UltraHD/HD HDBaseT Receiver with 4 integrated 6G/3G-SDI outputs and HDMI video and audio outputs designed to receive RovoCam’s output.
RovoRx-SDI is an UltraHD/HD HDBaseT Receiver with four integrated 6G/3G-SDI outputs and HDMI video and audio outputs specifically designed to receive RovoCam’s output. Receive the RovoCam’s video and audio up to 100m away from the camera, and output to SDI monitors, routers and recorders and HDMI TVs and devices. RovoRx-SDI also offers a DA (Distribution Amplifier) Mode for extensive output options. The HDBaseT connector on RovoRx-HDMI supports camera uncompressed video, audio, power, and control, all over a single Cat 5e/6 cable, greatly simplifying cabling and systems integration.
AJA ROVORX-SDI Features
- 4x 6G/3G-SDI outputs support video and embedded audio for incredible multi-format compatibility
- 8-Channels (4 pairs) of SDI embedded audio supported
- DA Mode for distributing 6G/3G-SDI UltraHD and HD signals from HDBaseT sources
- HDMI simultaneous output for UltraHD and HD displays
- REF in/out that can be genlocked with other broadcast gear
- USB port for software configuration of SDI settings
- Power over HDBaseT (PoH), allowing RovoCam to be powered remotely from its physical location
- ROVORX-SDI UltraHD/HD HDBaseT Receiver to 6G/3G-SDI and HDMI Frame Sync1
- Dimensions (W x D x H)4.66 x 6.97 x 0.94 inches (118.37 x 177.04 x 23.88 mm)
- Weight0.8 lbs (0.4kg)
- Power
- RovoRx-SDI only: 48V @ 303mA = 14.5W typical, 48V @ 335mA = 16W max
- RovoRx-SDI powering RovoCam: 48V @ 450mA = 21.6W typical, 48V @ 480mA = 23W max
- Environment
- Safe Operating Temperature: 32 to 104 F (0 to 40 C)
- Safe Storage Temperature (Power OFF): -40 to 140 F (-40 to 60 C)
- Operating Relative Humidity: 10-90% noncondensing
- Operating Altitude: <3,000 meters (<10,000 feet)
