V2Analog is a high-quality, cost-effective digital to analog video converter that’s an ideal solution for integrating analog equipment such as monitors and tape decks into digital workflows. V2Analog performs high-quality SDI digital to component or composite analog conversion at either SD or HD resolutions with a full 10-bit data path. V2Analog takes incoming SDI signals and converts to YPbPr (SMPTE, EBU-N10), Betacam, or RGB component outputs or NTSC/PAL or Y/C (S-Video) composite outputs for complete integration into any workflow. Configuration can be set by on unit DIP switches or remotely via AJA MiniConfig software control over USB.
Note: V2Analog does NOT up-convert or down-convert between SD and HD resolutions. Only digital to analog signal conversion is supported.
AJA V2ANALOG Features
- 10-bit AJA digital to analog conversion
- Low power, compact size
- HD/SD-SDI input
- YPbPr/RGB Component, Composite, S-Video output
- Configure via DIP switch or USB port and supplied Mini-Config software
- V2ANALOG HD/SD-SDI to Analog Mini-Converter1
- Five Year Warranty1
- Video Formats
- (HD) 1080i 50, 59.94, 60
- (HD) 1080p 23.98, 24, 25, 29.97, 30
- (HD) 1080PsF 23.98, 24, 25
- (HD) 720p 50, 59.94, 60
- (SD) 625i
- (SD) 525i
- Input HD/SD-SDI, SMPTE-259/292/296M, 1x BNC
- Outputs
- HD component YPbPr, RGB (SMPTE-274), BNC
- SD component (Betacam, EBU-N10)/composite/YC (S-Video), BNC
- User Controls
- External Dipswitch
- Control (Local/Remote)
- Component/Composite (SD Only)
- Format (YPbPr/YC or RGB)
- Pedestal Present (on/off) (SD Only)
- Dimensions (W x D x H)5.1 × 2.4 × 1 inches (129.54 × 60.96 × 25.4 mm)
- Power+5-20 VDC, 3 watts
- Environment
- Safe Operating Temperature: 32 to 104 F (0 to 40 C)
- Safe Storage Temperature (Power OFF): -40 to 140 F (-40 to 60 C)
- Operating Relative Humidity: 10-90% noncondensing
- Operating Altitude: <3,000 meters (<10,000 feet)