Skip to main content
Aviom Mix320-A Personal Mixing System
Aviom Mix320-A Personal Mixing System
$5,499.00

Aviom Mix320-A Personal Mixing System

SoundPro Item: 20998
MPN: MIX320-A
MSRP: $5,999.00
$5,499.00
Add to Wish List

Account manager
Contact an Account Manager for your personalized price

The Aviom Mix320-A Personal Mixing System includes everything you need to create a 16-input personal mixing system for six performers. It's perfect for stage or studio use.

Connect balanced analog inputs from a mixing console for live use or to the outputs of your DAW recording interface or console to create a studio cue system.

The A320 Personal Mixers get their digital data and power over the same cable, so all you need to do is connect a Cat-5 cable and you're ready to start using the system.

Aviom Mix320-A Features

  • 16-input personal mixing system
  • For Six performers
  • Perfect for stage or studio use
  • AN-16/i v.2 Input Module1
  • D400 A-Net Distributor1
  • A320 Personal Mixers6
  • MT-1a Mic Stand Mounts6
  • Cat-5e cables7
  • A320 Specifications
    • Audio Output: 1/4" TRS stereo, headphone or line level
    • Stereo Mix Output, Headphone/Line
        Tip: Audio Left
      • Ring: Audio Right
      • Sleeve: Ground
    • A-Net I/O
      • 1 A-Net In, RJ45 connector
      • Supports Pro16 and Pro16e
    • D/A Conversion: 44.1/48kHz, 24-bit
    • Stereo Operation
      • Stereo Link, per channel pair
      • Set at the input module
      • Variable pan per mono channel or pan/spread per stereo channel pair
    • Headphone Output: 275 mW per side into 50 Ohms (both sides driven)
    • Output Impedance: 5 Ohms
    • Freq. Response: 3Hz-22kHz +0.2dB/-3dB at 50 Ohms
    • THD +N: < 0.003%
    • Output Voltage for Personal Mixers
      • 24VDC, 0.5 amp
      • Transmitted over the Cat-5e cable
    • Signal to Noise (unweighted): -106dB (measured with zero data into all channels)
    • Latency: 0.880 msec (measured from analog input to analog output)
    • Pro16e A-Net
      • Use Cat-5e (or better) cable
      • Maximum 400 ft (122 m) between devices
      • Supports Power Over A-Net
    • Cat-5 cable: Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.
    • Power
      • 24 VDC, 0.5 amp
      • Power is supplied over the Cat-5 cable when connected to an Aviom A-Net Distributor
    • Dimensions (WxDxH): 10.26x6.14x1.91" (260.6x155.95x48.51 mm)
    • Weight: 1.3 lb (0.59 kg)
  • AN-16/i v.2 Specifications
    • Audio Inputs: 16, balanced line-level, 1/4-inch TRS connector
    • Inputs: Tip: Audio +; Ring: Audio -; Sleeve: Ground
    • TRS Thru: Impedance matched output
    • Analog to Digital Conversion: 48kHz sample rate, 24 bit
    • Frequency Response: 4Hz-22kHz
    • A- Net In
      • One Category 5 (RJ45 connector)
      • Four-position slot range selector switch for use with Pro16e A-Net
    • A-Net Out: One Category 5 (RJ45 connector)
    • Gain Settings: Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu
    • Channel LED Indicators: Signal Present and Clip, per channel
    • Line Inputs: Impedance: 48k ohms
    • Metering: LEDs; green: Signal Present, red: Clip; per channel
    • Stereo Operation
      • Stereo Link, per channel pair
      • Two-position switch (Normal, Link)
    • Maximum Input Level: +22dBu
    • Input Impedance: 17.8k ohm
    • Freq. Response: 4Hz-22kHz +0.2dB/-3dB
    • THD+N: < 0.003%
    • Crosstalk: -90dB
    • Bit Error Rate (BER): 10(-12)
    • Signal to Noise (unweighted)
      • 90dB typical, A/D to D/A
      • Measured from AN-16/i to AN-16/o Output Module
    • Digital Outputs: A-Net: 1; RJ45 connector
    • Pro16e A-Net: Use unshielded Cat-5e UTP (or better) cable
    • Latency: <0.880 msec (measured from analog input to analog output)
    • Power Supply: External, DC, universal switching type
    • Input Voltage: 100-240 volts, 50/60Hz, 30VA
    • Output Voltage: 18-24 VDC, 0.5 amp
    • Plug Size: 2 mm
    • Power: 18-24 VDC, 500mA
    • Dimensions: 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
    • Weight: 6.8 lbs (3.08 kg)
  • D400 Specifications
    • A-Net Input
      • Pro16 or Pro16e A-Net
      • RJ45 connector
    • A-Net Offset Base Slot: 2-position DIP switch selects the starting channel that Personal Mixers will receive from the network (1, 17, 33, or 49)
    • Defeat Stereo Switches: Chooses between local (front panel) stereo links (up) or network stereo links (down)
    • A-Net Out to Personal Mixers: Eight RJ45 connectors, powered
    • A-Net Out
      • Pro16e A-Net
      • RJ45 connector, unpowered
    • LEDs: Power On (red); Network Sync (green)
    • Stereo Link: Two 8-position DIP switch blocks (1-16, 17-32)
    • Output Voltage for Personal Mixers
      • 24VDC, 0.5 amp
      • Transmitted over the Cat-5e cable
    • A-Net Cables: Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits. Unshielded Cat-5e cable may be used on all rear panel connections
    • Power Supply: Internal, IEC connector
    • Input Voltage: 100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz @220 W max
    • AC Fuse Types
      • 115V range: T2.5AL/250V
      • 230V range: T1.25AL/250V
    • Dimensions: 19" (482.6 mm) wide x 7.386" (187.6 mm) deep; 2U, 3.5" (88.9 mm) high
    • Weight: 12 lbs (5.44 kg)

In The Box

Customer Reviews