{"title":"RDL","description":"","products":[{"product_id":"rdl-db-psp1-decora-style-powered-speaker","title":"RDL DB-PSP1 Decora-Style Powered Speaker","description":"\u003cp\u003eThe D SERIES-PSP1 is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts. The input accepts either a -10 dBV unbalanced or a +4 dBu balanced signal on the rear-panel detachable terminal block. Amplification is provided by a high-efficiency Class D power stage with audio filtering tailored for crisp, pleasant audio clarity. The high-efficiency Class D output stage produces negligible heat for all levels of expected voice or music modulation. The amplified output level is controlled by a front-panel volume control. The PSP1 includes an analog compressor\/limiter that makes higher average sound output levels possible without clipping.\u003c\/p\u003e \u003cp\u003eThe driver is constructed of materials found in premium larger speakers. The unique steel enclosure provides full baffling in a tightly sealed rigid structure. This produces sonic presence within an extended frequency range expected from larger speakers. Internal filtering rolls off out-of-band frequencies to reduce distortion and increase peak power capability. Dispersion covers a spherical area of nearly 180 degrees with the speaker mounted in a wall.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51124776173752,"sku":"68020","price":261.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/68020_RDL-DB-PSP1-Decora-Style-Powered-Speaker.jpg?v=1768242352"},{"product_id":"rdl-d-tpsl1a-active-single-pair-sender","title":"RDL D-TPSL1A Active Single-Pair Sender","description":"\u003cp\u003eThe D-TPSL1A modules are single pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources.\u003c\/p\u003e \u003cp\u003eThe D–TPSL1A modules feature a stereo line input through a mini jack or two RCA phono jacks summed to mono. The unbalanced inputs are designed to receive standard -10 dBV consumer level signals. These modules drive only one cable pair, therefore they accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained with the D-TPSL1A, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.\u003c\/p\u003e \u003cp\u003eThe D-TPSL1A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The D-TPSL1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.\u003c\/p\u003e \u003cp\u003eRDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51124778008760,"sku":"68071","price":232.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/68071_RDL-D-TPSL1A-Active-Single-Pair-Sender.jpg?v=1768242356"},{"product_id":"rdl-ru-mlb2-mic-line-bi-directional-network-interface","title":"RDL RU-MLB2 Mic\/Line Bi-Directional Network Interface","description":"\u003cp\u003eThe RU-MLB2 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial\/industrial installations. \u003cbr\u003e\u003cbr\u003eAPPLICATION: The RU-MLB2 is a high quality converter that provides professional line-level outputs from two Dante network received audio channels. It also converts two professional or consumer line-level sources, or dynamic or condenser microphones to Dante network audio channels. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNetwork to Line Level Interface Section\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003eThe RU-MLB2 converts two Dante audio channels to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level. \u003cbr\u003e\u003cbr\u003eOne front-panel green signal LED corresponds to each of the two Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51124783415480,"sku":"74076","price":733.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/74076_RDL-RU-MLB2-Mic-Line-Bi-Directional-Network-Interface.jpg?v=1768243877"},{"product_id":"rdl-ru-nfd-network-to-format-a-interface-distributor","title":"RDL RU-NFD Network to Format-A Interface\/Distributor","description":"\u003cp\u003eThe RU-NFD modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial\/industrial installations.\u003c\/p\u003e \u003cp\u003eAPPLICATION: The RU-NFD is an RDL Format-A sender\/distributor that connects to a Dante-enabled network. It converts three Dante audio channels to RDL Format-A. Each network channel corresponds to Pair A, B or C of the Format-A outputs. The unit converts a fourth Dante audio channel to a balanced line-level AUX output.\u003c\/p\u003e \u003cp\u003eOne front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location.\u003c\/p\u003e \u003cp\u003eThe Format-A output is distributed to three separate rear-panel RJ45 jacks. Each Format-A output jack provides up to 200 mA of power to connected Format-A receivers. Multiple receivers may be daisy chained from one output jack, or may be connected by home run to each of the three outputs. Higher current Format-A receivers, such as RDL D-PSP1A powered Decora-style speakers, are to be individually connected to a separate output jack.\u003c\/p\u003e \u003cp\u003eThe RU-NFD output jacks support the entire range of Format-A receivers, making each output pair available for end-user connection on various wall plates, or feeding other equipment using rack-mounted, shelf-mounted or utility Format-A receivers. The wide array of Format-A receivers provide compatibility with commercial audio equipment operating at standard professional levels. High resolution digital audio converters coupled with RDL’s renowned analog filters provide superior fidelity with a very low noise floor. Each Format-A receiver may be connected near the RU-NFD or up to several thousand feet distant.\u003c\/p\u003e \u003cp\u003eThe RU-NFD is powered from an external 24 Vdc power supply, available separately. The external supply powers the RU-NFD and Format-A receivers connected to all three Format-A outputs. The RU-NFDP is equipped for PoE which powers the RU-NFD and Format-A receivers connected to the primary Format-A output jack. Audio is also distributed to the other two output jacks. Remote Format-A receivers connected to those other two output jacks are only powered from the RU-NFDP if an external 24 Vdc power supply is connected. If PoE power and an external 24 Vdc supply are both feeding an RU-NFDP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external 24 V supply. The power feeding each Format-A RJ45 connector is separately protected by an automatically resetting fuse. A power LED is associated with each connector, facilitating identification of wiring faults.\u003c\/p\u003e \u003cp\u003ePoE relies on the use of a PoE enabled network switch. The RU-NFDP will reserve power from the switch even while being powered from an external 24 Vdc supply.\u003c\/p\u003e \u003cp\u003eThe RU-NFD is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51124783546552,"sku":"74079","price":761.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/74079_RDL-RU-NFD-Network-to-Format-A-Interface-Distributor.jpg?v=1768243879"},{"product_id":"rdl-ru-nl4p-network-to-line-level-interface","title":"RDL RU-NL4P Network to Line Level Interface","description":"\u003cp\u003eThe RDL RU-NL4P Network to Line Level Interface is designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial\/industrial installations. \u003cbr\u003e\u003cbr\u003eAPPLICATION: The RU-NL4 is a high quality converter that provides professional line-level outputs from four Dante network audio channels. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom. \u003cbr\u003e\u003cbr\u003eOne front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location. \u003cbr\u003e\u003cbr\u003eThe RU-NL4 is powered from an external 24 Vdc power supply, available separately. The RU-NL4P is equipped to operate from a PoE enabled network switch. The RU-NL4P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-NL4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. \u003cbr\u003e\u003cbr\u003eThe RU-NL4P’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. \u003cbr\u003e\u003cbr\u003eThe RU-NL4 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51124783743160,"sku":"74086","price":765.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/74086_RDL-RU-NL4P-Network-to-Line-Level-Interface.jpg?v=1768243891"},{"product_id":"rdl-ru-asx4d-stereo-audio-selector","title":"RDL RU-ASX4D Stereo Audio Selector","description":"\u003cp\u003eThe RU-ASX4D is a four channel stereo audio selector with input gain adjustments and output level metering. The inputs and outputs are connected on rear-panel detachable terminal blocks. \u003cbr\u003e\u003cbr\u003eEach of the four stereo line level inputs accepts either a balanced or an unbalanced signal. Each input is equipped with a rear panel screwdriver-adjustable input gain trimmer. Input signal levels between -15 dBV and +8 dBu may be set to the proper operating level as indicated by a stereo dual-LED VU meter. This assures ample headroom at all normal operating levels. The module is equipped with two identical dual-led VU meters, one on the front panel, the other on the rear panel. The maximum input level is +25 dBu. \u003cbr\u003e\u003cbr\u003eThe RU-ASX4D was designed for absolute silent switching of audio signals using only solid-state switching circuitry. \u003cbr\u003e\u003cbr\u003eThe output is stereo line level. Each output channel may be connected balanced or unbalanced. Each of the VU-meters, left and right, is calibrated to read +4 dBu for the corresponding balanced output. \u003cbr\u003e\u003cbr\u003eA front-panel LOCAL\/REMOTE switch enables either the front-panel buttons or the rear-panel remote control terminals provided on detachable terminal blocks. In the LOCAL mode, four keyboard style long-life pushbuttons on the front panel are used to select one input. When a button is pushed, the corresponding audio input is fed to the output and any previously selected source is shut off. Only one source may be selected at a time. If the button for a selected source is pushed again, all inputs are turned off. An LED above each pushbutton indicates the selected source. In the REMOTE mode, inputs are selected by a sequential remote control such as an RDL D-RCS4, by a momentary remote control such as an RDL D-RC4M or by an external open-collector momentary closure to ground. The RU-ASX4D may be remote controlled from a single or from multiple locations. When a source is selected, the RU-ASX4D provides a 25 mA open-collector output to control other equipment or modules. \u003cbr\u003e\u003cbr\u003eRear-panel DIP switches are provided to permanently activate the remote control terminals, to select the remote control mode (sequential or individual source selection), and upon power-up a return to either a pre-programmed source or to the last source used. The pre-programmed source is stored when the module is installed. \u003cbr\u003e\u003cbr\u003eThe RU-ASX4D offers exceptional headroom, very low distortion, excellent crosstalk isolation, wide flat frequency response and extremely low noise with very high common-mode signal rejection. It provides exceptional audio performance for the most critical applications in a professional audio environment. \u003cbr\u003e\u003cbr\u003eThe RU-ASX4D operates from 24 Vdc connected through a rear-panel detachable terminal block.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51438841823416,"sku":"27425","price":421.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/27425_RDL-RU-ASX4D-Stereo-Audio-Selector.jpg?v=1767991416"},{"product_id":"rdl-sf-bnc2-bidirectional-unbalanced-stereo-audio-network-interface","title":"RDL SF-BNC2 Bidirectional Unbalanced Stereo Audio Network Interface","description":"\u003cp\u003eThe RDL SF-BNC2 Bidirectional Unbalanced Stereo Audio Network Interface is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5 mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5 mm Mini-jack connectors. Special software is not required to configure the SF-BNC2. Each input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input. Each output provides -10 dBV unbalanced for a network digital audio level of -20 dBFS. The SF-BNC2 is a professional grade product for studio quality fidelity and low noise performance.\u003c\/p\u003e \u003cp\u003eThe SF-BNC2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.\u003c\/p\u003e \u003cp\u003eThe SF-BNC2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX® product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX® products adds enormous flexibility in the design and installation of professional A\/V systems.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51438848114872,"sku":"28119","price":723.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/28119_RDL-SF-BNC2-Bidirectional-Unbalanced-Stereo-Audio-Network-Interface.jpg?v=1767991543"},{"product_id":"rdl-sf-dn4-dante-digital-audio-to-network-interface","title":"RDL SF-DN4 Dante Digital Audio to Network Interface","description":"\u003cp\u003eThe SF-DN4 is a digital audio interface that converts two stereo digital audio sources to four Dante network audio channels. The SF-DN4 automatically detects a valid input on any of the three input jacks: S\/PDIF optical, S\/PDIF coaxial, or AES\/EBU XLR. The input is decoded, re-clocked and transmitted to the Dante network. A yellow front-panel LOCK LED indicates a valid source received without any lock errors. Special software is not required to configure the module. The SF-DN4 is a professional grade product for studio quality performance.\u003c\/p\u003e \u003cp\u003eThe SF-DN4 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.\u003c\/p\u003e \u003cp\u003eThe SF-DN4 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX® product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX® products adds enormous flexibility in the design and installation of professional A\/V systems.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51438848180408,"sku":"28120","price":774.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/28120_RDL-SF-DN4-Dante-Digital-Audio-to-Network-Interface.jpg?v=1767991545"},{"product_id":"rdl-sf-nd2-dante-network-to-digital-audio-interface","title":"RDL SF-ND2 Dante Network to Digital Audio Interface","description":"\u003cp\u003eThe SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The output is switch-selectable to provide an AES\/EBU on XLR, or coaxial and optical S\/PDIF. The switch enables the appropriate output jack and any required electrical and data format conversion. Special software is not required to configure the module. The SF-ND2 is a professional grade product for studio quality performance.\u003c\/p\u003e \u003cp\u003eThe SF-ND2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.\u003c\/p\u003e \u003cp\u003eThe SF-ND2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX® product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX® products adds enormous flexibility in the design and installation of professional A\/V systems.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51438848213176,"sku":"28124","price":506.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/28124_RDL-SF-ND2-Dante-Network-to-Digital-Audio-Interface.jpg?v=1767991547"},{"product_id":"rdl-av-ln4-dante-line-level-audio-to-network-interface","title":"RDL AV-LN4 Dante Line Level Audio to Network Interface","description":"\u003cp\u003eThe AV-LN4 from RDL is an interface that converts four line-level XLR inputs to Dante network audio channels. Special software is not required to configure the AV-LN4. A dual-LED VU meter displays the level for each. The AV-LN4 is a professional grade product for studio quality fidelity and low noise performance.\u003c\/p\u003e \u003cp\u003eThe AV-LN4 may be powered from an external 24 Vdc power supply, available separately. The AV-LN4 is equipped to operate from a PoE enabled network switch. The AV-LN4 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-LN4, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.\u003c\/p\u003e \u003cp\u003eThe AV-LN4 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51442928025784,"sku":"43125","price":740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/43125_RDL-AV-LN4-Dante-Line-Level-Audio-to-Network-Interface.jpg?v=1768001799"},{"product_id":"rdl-av-nl4-dante-network-to-audio-interface","title":"RDL AV-NL4 Dante Network to Audio Interface","description":"\u003cp\u003eThe AV-NL4 from RDL is a line-level interface that converts four Dante network audio channels to four balanced audio outputs on XLR connectors. Each channel provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. Special software is not required to configure the module. The AV-NL4 is a professional grade product for studio quality fidelity and low noise performance.\u003c\/p\u003e \u003cp\u003eThe AV-NL4 may be powered from an external 24 Vdc power supply, available separately. The AV-NL4 is equipped to operate from a PoE enabled network switch. The AV-NL4 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-NL4, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.\u003c\/p\u003e \u003cp\u003eThe AV-NL4 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51442928091320,"sku":"43128","price":690.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/43128_RDL-AV-NL4-Dante-Network-to-Audio-Interface.jpg?v=1768001801"},{"product_id":"rdl-db-bt1a-wall-mounted-bluetooth-audio-format-a-interface","title":"RDL DB-BT1A Wall-Mounted Bluetooth Audio Format-A Interface","description":"\u003cp\u003eThe D SERIES-BT1A modules are Bluetooth audio receiving modules compatible with RDL® Format-A twisted pair receivers. When paired with a compatible Bluetooth enabled device, the module receives stereo audio from the Bluetooth source. The stereo signal is sent through two Format-A pairs to any RDL Format-A receiver. A stereo\/mono switch set by the installer permits summed mono audio to be sent over one switch-selected pair to the Format-A receiver.\u003c\/p\u003e \u003cp\u003eIf set for stereo operation, an additional Format-A source (set to Pair A) may be daisy chained with the D SERIES-BT1A to a three-pair Format-A receiver. If set for mono operation, up to three D SERIES-BT1A modules may be daisy chained to a single three-pair Format-A receiver. Connections between Format-A modules and Format-A receivers use standard CATx cable with RJ45 connectors.\u003c\/p\u003e \u003cp\u003eThe D SERIES-BT1A modules are powered from the Format-A receiver. The installer can customize the module name and programming password through the Bluetooth connection using a smartphone, computer or tablet terminal program. These modules feature studio-quality circuits and analog filters to provide audio performance exceeding expectations from consumer interface technologies. High performance, simplicity of operation and efficiency of installation make RDL the best value in professional Bluetooth interfaces.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51442955845816,"sku":"44398","price":417.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/44398_RDL-DB-BT1A-Wall-Mounted-Bluetooth-Audio-Format-A-Interface.jpg?v=1768002276"},{"product_id":"rdl-std-10k-passive-audio-divider-combiner","title":"RDL STD-10K Passive Audio Divider\/Combiner","description":"\u003cp\u003eThe STD-10K from RDL is a Passive Audio Divider\/Combiner.\u003c\/p\u003e \u003cp\u003eEach STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. This permits combining stereo signals into mono inputs, splitting mono signals to multiple inputs, and even combining microphones with output shorting switches into a single amplifier input. The STD modules are available in 150Ω, 600Ω, and 10 kΩ models. All inputs and outputs are balanced.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443108937912,"sku":"48874","price":82.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/48874_RDL-STD-10K-Passive-Audio-Divider-Combiner.jpg?v=1768004332"},{"product_id":"rdl-dd-btn44-wall-mounted-audio-dante-interface","title":"RDL DD-BTN44 Wall-Mounted Audio Dante Interface","description":"\u003cp\u003eThe RDL DD-BTN44 Wall-Mounted Audio Dante Interface is powered from PoE. The installer can customize the module name and programming password through the Bluetooth connection using a smartphone, computer or tablet terminal program. These modules feature studio-quality circuits and analog filters to provide audio performance exceeding expectations from consumer interface technologies. High performance, simplicity of operation and efficiency of installation make RDL the best value in professional Bluetooth interfaces.\u003c\/p\u003e \u003cp\u003eThe D SERIES-BTN44 modules are Dante networked, wall-mounted audio interfaces that include bidirectional Bluetooth audio, unbalanced analog stereo or mono audio inputs and outputs, and a balanced or unbalanced line-level output. Stereo audio from a compatible Bluetooth-enabled device feeds two Dante network audio channels. Stereo audio connected to a front-panel Mini-Jack or L and R RCA jacks feeds two other Dante network audio channels.\u003c\/p\u003e \u003cp\u003eStereo audio is available to users through a front-panel Mini-Jack fed from two Dante network channels. A rear-panel terminal block provides either a balanced (+4 dBu) or unbalanced (-10 dBV) output from one Dante network channel. That output may feed a variety of RDL wall panels to provide a specific mic or line level output to users, or it may be used to feed the audio power amplifier in the associated audio zone. One Dante channel may be routed back to a connected device through the Bluetooth interface enabling full duplex communication.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443157663928,"sku":"49780","price":1015.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/RDLDD-BTN44-front.jpg?v=1772234788"},{"product_id":"rdl-dd-bn31-bidirectional-mic-line-dante-interface","title":"RDL DD-BN31 BiDirectional Mic\/Line Dante Interface","description":"\u003cp\u003eThe DD-BN31 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN31. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input provides a switch to configure the input for stereo or summed mono. The Mini-jack output provides a switch to configure the output for stereo or left-channel mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN31 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN31 is PoE powered, and is available in multiple finishes with optional customized graphics.\u003c\/p\u003e \u003cp\u003eThe two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.\u003c\/p\u003e \u003cp\u003eThe Mini-jack left and right inputs are each converted to a separate Dante network transmit channel. Each input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input. The input is equipped with a selector to sum the left and right Mini-jack inputs. The summed signal feeds both Dante transmit channels.\u003c\/p\u003e \u003cp\u003eTwo Dante audio channels are converted to unbalanced line level to feed the front-panel Mini-jack. Each channel provides -10 dBV unbalanced for a network digital audio level of -20 dBFS. The left and right Mini-jack channels are normally fed from Dante receive channels 3 and 4 (stereo). The Mini-jack output is equipped with a selector to feed both output channels from Dante receive channel 3 (mono). This selector may be set from the front of the unit when the cover plate is not installed.\u003c\/p\u003e \u003cp\u003eTwo Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit.\u003c\/p\u003e \u003cp\u003eThe rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN31. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN31 in a triple gang box or may be mounted remotely in a single box.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443402244280,"sku":"55775","price":897.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/55775_RDL-DD-BN31-BiDirectional-Mic-Line-Dante-Interface.jpg?v=1768240282"},{"product_id":"rdl-dd-bn40-wall-mounted-bi-directional-mic-line-dante-interface","title":"RDL DD-BN40 Wall-Mounted Bi-Directional Mic\/Line Dante Interface","description":"\u003cp\u003eThe DD-BN40 Wall-Mounted Bi-Directional Mic\/Line Dante Interface from RDL is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. Each output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN40 is PoE powered, and is available in multiple finishes with optional customized graphics. \u003cbr\u003e\u003cbr\u003eThe four XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. \u003cbr\u003e\u003cbr\u003eTwo Dante audio channels are converted to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The outputs are connected through a detachable terminal block. \u003cbr\u003e\u003cbr\u003eThe outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN40. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN40 in a triple gang box or may be mounted remotely in a single box. \u003cbr\u003e\u003cbr\u003eValid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. \u003cbr\u003e\u003cbr\u003eThe DD-BN40 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. \u003cbr\u003e\u003cbr\u003eThe DD-BN40’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443402408120,"sku":"55776","price":923.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/55776_RDL-DD-BN40-Wall-Mounted-Bi-Directional-Mic-Line-Dante-Interface.jpg?v=1768240283"},{"product_id":"rdl-ru-fp1r-rack-up-filler-panel","title":"RDL RU-FP1R RACK-UP Filler Panel","description":"\u003cp\u003eThe RU-FP1R frpm RDL fills unused openings in any RACK-UP series mounting adapter.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443426820280,"sku":"57749","price":14.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/57749_RDL-RU-FP1R-RACK-UP-Filler-Panel.jpg?v=1768240577"},{"product_id":"rdl-ru-ra3r-rack-adapter","title":"RDL RU-RA3R Rack Adapter","description":"\u003cp\u003eThe RU-RA3R from RDL rack mounts 3 RACK-UP modules in fixed or mobile installations. Metal RACK-UP series products drop into the chassis, slide into position and are secured by tightening two screws provided with the RACK-UP product or accessory.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443426853048,"sku":"57750","price":80.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/57750_RDL-RU-RA3R-Rack-Adapter.jpg?v=1768240578"},{"product_id":"rdl-dds-bn22-bi-directional-mic-line-dante-interface","title":"RDL DDS-BN22 Bi-Directional Mic\/Line Dante Interface","description":"\u003cp\u003eThe DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DD-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics.\u003c\/p\u003e \u003cp\u003eThe two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.\u003c\/p\u003e \u003cp\u003eTwo Dante audio channels are converted to balanced line level on front-panel XLR jacks. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit.\u003c\/p\u003e \u003cp\u003eValid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.\u003c\/p\u003e \u003cp\u003eThe DD-BN22 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates.\u003c\/p\u003e \u003cp\u003eThe DD-BN22’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443551600824,"sku":"62093","price":862.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/62093_RDL-DDS-BN22-Bi-Directional-Mic-Line-Dante-Interface.jpg?v=1768241277"},{"product_id":"rdl-ddb-bn31-bidirectional-mic-line-dante-interface","title":"RDL DDB-BN31 BiDirectional Mic\/Line Dante Interface","description":"\u003cp\u003eThe DDB-BN31 from RDL is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs, one stereo Mini-jack line input and one stereo Mini-jack line output on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DDB-BN31. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input provides a switch to configure the input for stereo or summed mono. The Mini-jack output provides a switch to configure the output for stereo or left-channel mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DDB-BN31 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DDB-BN31 is PoE powered, and is available in multiple finishes with optional customized graphics. \u003cbr\u003e\u003cbr\u003eThe two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. \u003cbr\u003e\u003cbr\u003eThe Mini-jack left and right inputs are each converted to a separate Dante network transmit channel. Each input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input. The input is equipped with a selector to sum the left and right Mini-jack inputs. The summed signal feeds both Dante transmit channels. \u003cbr\u003e\u003cbr\u003eTwo Dante audio channels are converted to unbalanced line level to feed the front-panel Mini-jack. Each channel provides -10 dBV unbalanced for a network digital audio level of -20 dBFS. The left and right Mini-jack channels are normally fed from Dante receive channels 3 and 4 (stereo). The Mini-jack output is equipped with a selector to feed both output channels from Dante receive channel 3 (mono). This selector may be set from the front of the unit when the cover plate is not installed. \u003cbr\u003e\u003cbr\u003eTwo Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. \u003cbr\u003e\u003cbr\u003eThe rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DDB-BN31. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DDB-BN31 in a triple gang box or may be mounted remotely in a single box. \u003cbr\u003e\u003cbr\u003eValid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. \u003cbr\u003e\u003cbr\u003eThe DDB-BN31 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. \u003cbr\u003e\u003cbr\u003eThe DDB-BN31’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443551666360,"sku":"62094","price":897.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/62094_RDL-DDB-BN31-BiDirectional-Mic-Line-Dante-Interface.jpg?v=1768241279"},{"product_id":"rdl-dd-bn22-bidirectional-mic-line-dante-interface","title":"RDL DD-BN22 BiDirectional Mic\/Line Dante Interface","description":"\u003cp\u003eThe DD-BN22 from RDL is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DD-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics.\u003c\/p\u003e \u003cp\u003eThe two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.\u003c\/p\u003e \u003cp\u003eTwo Dante audio channels are converted to balanced line level on front-panel XLR jacks. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit.\u003c\/p\u003e \u003cp\u003eValid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.\u003c\/p\u003e \u003cp\u003eThe DD-BN22 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates.\u003c\/p\u003e \u003cp\u003eThe DD-BN22’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443552452792,"sku":"62130","price":862.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/62130_RDL-DD-BN22-BiDirectional-Mic-Line-Dante-Interface.jpg?v=1768241282"},{"product_id":"rdl-dd-bn2m-bi-directional-mic-line-dante-interface","title":"RDL DD-BN2M Bi-Directional Mic\/Line Dante Interface","description":"\u003cp\u003eThe DD-BN2M is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2M. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN2M fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN2M is PoE powered, and is available in multiple finishes with optional customized graphics.\u003c\/p\u003e \u003cp\u003eThe two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.\u003c\/p\u003e \u003cp\u003eTwo Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit.\u003c\/p\u003e \u003cp\u003eThe rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN2M. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN2M in a triple gang box or may be mounted remotely in a single box.\u003c\/p\u003e \u003cp\u003eValid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.\u003c\/p\u003e \u003cp\u003eThe DD-BN2M is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates.\u003c\/p\u003e \u003cp\u003eThe DD-BN2M’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443552485560,"sku":"62132","price":803.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/62132_RDL-DD-BN2M-Bi-Directional-Mic-Line-Dante-Interface.jpg?v=1768241284"},{"product_id":"rdl-dd-bn2ml-bi-directional-mic-line-dante-interface","title":"RDL DD-BN2ML Bi-Directional Mic\/Line Dante Interface","description":"\u003cp\u003eThe DD-BN2ML is a complete wall-mounted Dante audio network interface. It features one XLR mic or line input and one mono-summed Mini-jack line input on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input accepts mono or stereo unbalanced line-level sources that are summed to mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN2ML fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN2ML is PoE powered, and is available in multiple finishes with optional customized graphics.\u003c\/p\u003e \u003cp\u003eThe XLR input is converted to feed one Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.\u003c\/p\u003e \u003cp\u003eThe Mini-jack left and right inputs are summed to mono to feed one Dante network transmit channel. This input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input.\u003c\/p\u003e \u003cp\u003eTwo Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit.\u003c\/p\u003e \u003cp\u003eThe rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN2ML. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN2ML in a triple gang box or may be mounted remotely in a single box.\u003c\/p\u003e \u003cp\u003eValid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.\u003c\/p\u003e \u003cp\u003eThe DD-BN2ML is a professional grade product with a discrete mic preamplifier for studio quality fidelity and low noise performance, coupled through a metal XLR jack housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates.\u003c\/p\u003e \u003cp\u003eThe DD-BN2ML’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443552551096,"sku":"62133","price":764.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/62133_RDL-DD-BN2ML-Bi-Directional-Mic-Line-Dante-Interface.jpg?v=1768241286"},{"product_id":"rdl-dds-bn40-bi-directional-mic-line-dante-interface","title":"RDL DDS-BN40 Bi-Directional Mic\/Line Dante Interface","description":"\u003cp\u003eThe DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. Each output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN40 is PoE powered, and is available in multiple finishes with optional customized graphics.\u003c\/p\u003e \u003cp\u003eThe four XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.\u003c\/p\u003e \u003cp\u003eTwo Dante audio channels are converted to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The outputs are connected through a detachable terminal block.\u003c\/p\u003e \u003cp\u003eThe outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN40. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN40 in a triple gang box or may be mounted remotely in a single box.\u003c\/p\u003e \u003cp\u003eValid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.\u003c\/p\u003e \u003cp\u003eThe DD-BN40 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates.\u003c\/p\u003e \u003cp\u003eThe DD-BN40’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443558154424,"sku":"62373","price":923.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/62373_RDL-DDS-BN40-Bi-Directional-Mic-Line-Dante-Interface.jpg?v=1768241347"},{"product_id":"rdl-st-mpa48-dual-microphone-phantom-adapter-48-v","title":"RDL ST-MPA48 Dual Microphone Phantom Adapter - 48 V","description":"\u003cp\u003eThe ST-MPA48 from RDL contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. Phantom voltage appears on each of the mic input terminals. Therefore, the ST-MPA48 can convert any existing mic input into a 48 Vdc phantom powered input. Phantom voltage is not present on the output terminals. \u003cbr\u003e\u003cbr\u003eThe power supply input terminals may be fed with any dc voltage from 10.5 volts to 26 volts.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443870761144,"sku":"68081","price":181.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/68081_RDL-ST-MPA48-Dual-Microphone-Phantom-Adapter-48-V.jpg?v=1768242358"},{"product_id":"rdl-d-cij3-consumer-stereo-input-wall-plate","title":"RDL D-CIJ3 Consumer Stereo Input Wall Plate","description":"\u003cp\u003eThe D\/S-CIJ3 is the ideal choice in installations requiring the passive mixing of two unbalanced line level audio sources to feed a mono balanced (or unbalanced) audio line.\u003c\/p\u003e \u003cp\u003eThe D\/S-CIJ3 is a complete unbalanced line-level audio input module. The front panel features two gold plated phono jacks and a single stereo mini-jack, intended for mono or stereo consumer level sources. An input signal may be connected to either the phono jacks or to the mini-jack. The left and right signal inputs are combined and balanced through audio transformers configured to reject induced hum. A mono line-level output is provided on the rear-panel detachable terminal block for connection to a 10 kO or higher input impedance line-level module or equipment input.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443926925496,"sku":"69387","price":109.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/69387_RDL-D-CIJ3-Consumer-Stereo-Input-Wall-Plate.jpg?v=1768242492"},{"product_id":"rdl-d-rlc10k-remote-level-control","title":"RDL D-RLC10K Remote Level Control","description":"\u003cp\u003eThe RLC10K is the ideal companion to the RDL VCA modules where levels are to be controlled from a single remote location. It is designed to directly interface with the 3-wire control input of the VCA module. The RLC10K contains a high-quality 10 kO potentiometer for setting the control voltage.\u003c\/p\u003e \u003cp\u003eThe RLC10K panel has 10 graphic increments which provide a visual indication of the level setting. The RLC10K and RDL remote source selector may be mounted together in a double box\/plate to form a visually appealing control of both audio source and audio level.\u003c\/p\u003e \u003cp\u003eThree conductors are required for connection between the RLC10K and an RDL VCA. A single shielded pair is normally used.\u003c\/p\u003e \u003cp\u003eAll the RLC10K features combine to make it the optimum economical choice for single-point remote level control in high-quality systems. Use the RLC10K individually with an RDL control module, or combine it side-by-side with other RDL remote accessories as part of a complete audio\/video system.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443930595512,"sku":"69563","price":53.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/69563_RDL-D-RLC10K-Remote-Level-Control.jpg?v=1768242504"},{"product_id":"rdl-ds-cij3-consumer-mono-input-jacks","title":"RDL DS-CIJ3 Consumer Mono Input Jacks","description":"\u003cp\u003eThe D\/S-CIJ3 is the ideal choice in installations requiring the passive mixing of two unbalanced line level audio sources to feed a mono balanced (or unbalanced) audio line.\u003c\/p\u003e \u003cp\u003eThe D\/S-CIJ3 is a complete unbalanced line-level audio input module. The front panel features two gold plated phono jacks and a single stereo mini-jack, intended for mono or stereo consumer level sources. An input signal may be connected to either the phono jacks or to the mini-jack. The left and right signal inputs are combined and balanced through audio transformers configured to reject induced hum. A mono line-level output is provided on the rear-panel detachable terminal block for connection to a 10 kO or higher input impedance line-level module or equipment input.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443930726584,"sku":"69566","price":109.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/69566_RDL-DS-CIJ3-Consumer-Mono-Input-Jacks.jpg?v=1768242508"},{"product_id":"rdl-ez-pa20-20w-stereo-audio-amplifier","title":"RDL EZ-PA20 20W Stereo Audio Amplifier","description":"\u003cp\u003eThe EZ-PA20 from RDL is a stereo audio amplifier with one line input and a front-panel volume control. An integral compressor\/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. The EZ-PA20 is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms and commercial sound systems.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443938263224,"sku":"69737","price":192.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/69737_RDL-EZ-PA20-20W-Stereo-Audio-Amplifier.jpg?v=1768242562"},{"product_id":"rdl-fp-pa35a-35w-mono-audio-amplifier","title":"RDL FP-PA35A 35W Mono Audio Amplifier","description":"\u003cp\u003eThe FP-PA35A is the ideal choice in many applications where multiple 25V, 70V or 100V speakers in a zone need to be powered from a single audio power amplifier.\u003c\/p\u003e \u003cp\u003eThe FP-PA35A features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. Multiple distributed sound system speakers connect to the corresponding 25 V, 70 V or 100 V amplified output.\u003c\/p\u003e \u003cp\u003eThe FP-PA35A includes an analog compressor\/limiter for audio fidelity audibly superior to conventional class D amplifiers with digital limiting. The input GAIN setting determines whether the limiter alone is used for clipping suppression, or if the full compressor\/limiter will be used to substantially increase the average output power beyond that of a standard 35 W amplifier. A red COMPRESSION LED flashes when the limiter is preventing output clipping. Normal audio level signals remain unaffected by the compressor thereby preserving audio dynamics. If the input level is increased so that the compressor is active, the LED remains dimly lit between peak flashes. The audio is compressed according to three dynamic time constants providing aural transparency while maintaining clean, unclipped amplified audio for input overloads of up to 20 dB. The FP-PA35A, with compression, is capable of producing average audio output levels and clarity normally expected from amplifiers with a much higher output power rating.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443939737784,"sku":"69854","price":319.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/69854_RDL-FP-PA35A-35W-Mono-Audio-Amplifier.jpg?v=1768242569"},{"product_id":"rdl-ps-24as-24-vdc-switching-power-supply","title":"RDL PS-24AS 24 Vdc Switching Power Supply","description":"\u003cp\u003eThe RDL PS-24AS is a 24 Vdc switching power supply and features a North American AC Plug, 500 mA, dc Plug.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51443986596024,"sku":"71195","price":35.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/71195_RDL-PS-24AS-24-Vdc-Switching-Power-Supply.jpg?v=1768242879"},{"product_id":"rdl-std-600-600-ohm-passive-audio-divider-combiner","title":"RDL STD-600 600 Ohm Passive Audio Divider\/Combiner","description":"\u003cp\u003eThe STD-600 from RDL  is a 600 Ohm Passive Audio Divider\/Combiner.\u003c\/p\u003e \u003cp\u003eEach STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. This permits combining stereo signals into mono inputs, splitting mono signals to multiple inputs, and even combining microphones with output shorting switches into a single amplifier input. The STD modules are available in 150\u0026amp;ohm;, 600\u0026amp;ohm; and 10k\u0026amp;ohm; models. All inputs and outputs are balanced.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444010647736,"sku":"71821","price":81.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/71821_RDL-STD-600-600-Ohm-Passive-Audio-Divider-Combiner.jpg?v=1768243054"},{"product_id":"rdl-stm-2-adjustable-gain-microphone-preamp","title":"RDL STM-2 Adjustable Gain Microphone Preamp","description":"\u003cp\u003eThe STM-2 is a quality low-noise microphone preamplifier designed for use in commercial sound, broadcast, and recording. The STM-2 is very flexible, with gain adjustment from 35 to 65 dB, two balanced or unbalanced outputs, and available phantom supply input. Its ultra-low distortion and lownoise performance make it the best choice, even when larger preamps could be used. The STM 2 supply input is single ended and operates from 24 Vdc. Operation from 12 Vdc is possible with a 6 dB reduction in headroom. Each output drives high or low impedance loads.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444010909880,"sku":"71826","price":211.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/71826_RDL-STM-2-Adjustable-Gain-Microphone-Preamp.jpg?v=1768243059"},{"product_id":"rdl-st-mx2-2-channel-audio-mixer","title":"RDL ST-MX2 2-Channel Audio Mixer","description":"\u003cp\u003eThe ST-MX2 is used in any application requiring mixing of two audio sources. A mic may be mixed with a line-level music source. Two mics may be mixed to feed the mic or line level input of a power amplifier. A mic or professional +4 dBu line-level mono sum is possible. It may be used to convert mono line-level signals from consumer to professional, or from professional to consumer format. It may also be used as a microphone preamplifier, or conversely to adapt unbalanced or balanced line-level signals into the microphone input of other equipment.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444011106488,"sku":"71828","price":200.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/71828_RDL-ST-MX2-2-Channel-Audio-Mixer.jpg?v=1768243061"},{"product_id":"rdl-st-mx3-3-channel-audio-mixer","title":"RDL ST-MX3 3-Channel Audio Mixer","description":"\u003cp\u003eThe ST-MX3 is a line-level mixer module in the STICK-ON Series of products. It provides audio mixing of three line-level inputs with individual input gain adjustments. The line-level output is capable of driving either high or low impedance, balanced or unbalanced loads. The ST-MX3 operates from ground-referenced floating or bipolar dc power. For installations with microphone level inputs, use the ST-UMX3 Universal Audio Mixer.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444011204792,"sku":"71829","price":185.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/71829_RDL-ST-MX3-3-Channel-Audio-Mixer.jpg?v=1768243063"},{"product_id":"rdl-st-ssr1-2x1-line-level-audio-switch","title":"RDL ST-SSR1 2x1 Line-Level Audio Switch","description":"\u003cp\u003eThe ST-SSR1 was designed for absolute silent switching of audio signals. It supports two balanced line-level inputs and one balanced output. Each can be used unbalanced as well. The ST-SSR1 is perfect for switching between two input signals or as a silent On\/Off switch for a single channel. Performance is in keeping with the technical standards for which RDL® has become known. The user can program the module for either fast or soft switching.\u003c\/p\u003e \u003cp\u003eThe SELECT input feeds the OUTPUT when the TRIG terminal is grounded, otherwise the OUTPUT is fed by the NORMAL input.\u003c\/p\u003e \u003cp\u003eThe control current required at the TRIG terminal is so minimal (\u0026lt; 0.5 mA) that the ST-SSR1 can be controlled from nearly any source from switches to logic circuits.\u003c\/p\u003e \u003cp\u003eThe ST-SSR1 may be controlled using the RDL D-RC2ST or the D-RT2 remote controls.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444011401400,"sku":"71832","price":157.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/71832_RDL-ST-SSR1-2x1-Line-Level-Audio-Switch.jpg?v=1768243065"},{"product_id":"rdl-st-uba2-2-channel-unbalanced-to-balanced-amplifier","title":"RDL ST-UBA2 2-Channel Unbalanced to Balanced Amplifier","description":"\u003cp\u003eThe ST-UBA2 is used in any application requiring conversion from unbalanced consumer format signals to professional +4 dBu. It may be used to balance audio from CD players, cassette decks, computer sound cards, televisions, and a wide variety of other unbalanced sources. The mono sum output may be used to drive patch-bay jacks, monitors or subwoofer amplifiers. \u003cbr\u003e\u003cbr\u003eSeparate Dual-LED VU metering is provided for the left and right outputs. A green LED illuminates at 15 dB below +4 dBu. The intensity of the green LED progresses from minimum at -11 dBu to full intensity at +4 dBu. The adjacent red LED illuminates at +4 dBu. \u003cbr\u003e\u003cbr\u003eThe audio clarity, low-noise, low-distortion and excellent crosstalk performance makes this module ideally suited to a wide variety of demanding audio applications. Use this module in conjunction with other RDL® modules as part of a high quality, flexible audio\/video system.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444011499704,"sku":"71833","price":225.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/71833_RDL-ST-UBA2-2-Channel-Unbalanced-to-Balanced-Amplifier.jpg?v=1768243066"},{"product_id":"rdl-st-vca3-voltage-controlled-amplifier","title":"RDL ST-VCA3 Voltage Controlled Amplifier","description":"\u003cp\u003eThe ST-VCA3 is used in applications requiring smooth audio level control from a remote control panel, potentiometer or dc voltage (0 to 10 V). Installation in series with the audio input of a power amplifier allows remote control of that amplifier's level. For installations where it is preferred to keep the audio localized in the rack, audio controls are extended outside the rack from the ST-VCA3. Many installations benefit from avoiding long-term potentiometer wear from audio running through the potentiometer. An ST-VCA3 with external dc control provides virtual immunity from scratchy audio. Audio\/video system control units often provide 0 to 10 Vdc control outputs that can directly control audio levels using an ST-VCA3. The ST-VCA3 is primarily intended for line-level attenuation; a high quality utility microphone preamplifier is included in the module. If remote control of a microphone preamplifier is desired, such as a wall mounted level control for a microphone jack, the ST-VCA3 may serve as a remote controlled microphone preamplifier.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444012056760,"sku":"71841","price":178.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/71841_RDL-ST-VCA3-Voltage-Controlled-Amplifier.jpg?v=1768243080"},{"product_id":"rdl-st-vp2-automatic-ducking-module","title":"RDL ST-VP2 Automatic Ducking Module","description":"\u003cp\u003eThe ST-VP2 can be wired into any line-level input of a paging amplifier. A line-level music source may be provided from a receiver, satellite decoder, tape or CD source. A line-level voice source may be provided from a telephone paging system at line level, or from a microphone which has been preamplified up to line level (See RDL STM-1, STM-2, STM-2X, STM-3, STM-LDA3 Microphone Preamplifiers). When a page is initiated, the module automatically senses the audio at the input, turns the music down to the desired level, and automatically fades the music back up after the page is completed. The VOICE input is completely turned off by the module until the next paging signal is received. Setup is made easy by two LED indicators at the front of the module. LEDs are provided to show correct operating level for each of the two inputs.\u003c\/p\u003e \u003cp\u003eThe music input provides an AGC\/Compressor which transparently produces a consistent audio level for varying music sources and protects against excessive music levels which would otherwise mask the voice signal during voice-overs.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444012155064,"sku":"71842","price":231.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/71842_RDL-ST-VP2-Automatic-Ducking-Module.jpg?v=1768243082"},{"product_id":"rdl-tx-1a-balanced-to-unbalanced-transformer","title":"RDL TX-1A Balanced to Unbalanced Transformer","description":"\u003cp\u003eThe TX-1A from RDL is a balanced to unbalanced transformer.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444023591096,"sku":"72605","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/72605_RDL-TX-1A-Balanced-to-Unbalanced-Transformer.jpg?v=1768243217"},{"product_id":"rdl-tx-70a-speaker-level-input-interface","title":"RDL TX-70A Speaker Level Input Interface","description":"\u003cp\u003eThe TX-70A from RDL is a speaker level input interface.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444023787704,"sku":"72609","price":57.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/72609_RDL-TX-70A-Speaker-Level-Input-Interface.jpg?v=1768243219"},{"product_id":"rdl-tx-a2-balanced-to-unbalanced-audio-converter","title":"RDL TX-A2 Balanced to Unbalanced Audio Converter","description":"\u003cp\u003eThe TX-A2 is ideal for installations requiring passive isolation and level attenuation between a pro balanced line-level mono source and consumer equipment unbalanced inputs.\u003c\/p\u003e \u003cp\u003eThe TX-A2 is a complete unbalanced line-level audio output module. The front panel provides a detachable terminal block for connection of a balanced +4 dBu audio source. The input signal is coupled to two front-panel gold plated RCA jacks through a studio-quality isolation transformer. Each output is coupled through an attenuation network that produces a nominal -10 dBV level. Both output jacks may be used to feed two mono equipment inputs or one stereo input. A single output jack may be used for mono. Shielding is provided by the TX-A2's heavy duty aluminum enclosure.\u003c\/p\u003e \u003cp\u003eWherever professional format audio signals need to be converted to an unbalanced line level, the TX-A2 and TX-A2D (sold separately) are an ideal choice. Use them individually or in conjunction with other RDL products as part of a complete audio\/video system.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444023951544,"sku":"72611","price":130.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/72611_RDL-TX-A2-Balanced-to-Unbalanced-Audio-Converter.jpg?v=1768243222"},{"product_id":"rdl-tx-a2d-dual-audio-converter-balanced-to-unbalanced","title":"RDL TX-A2D Dual Audio Converter - Balanced to Unbalanced","description":"\u003cp\u003eThe TX-A2D is the ideal choice in installations requiring passive isolation and level attenuation between a professional balanced line-level stereo source and consumer equipment unbalanced inputs. \u003cbr\u003e\u003cbr\u003eThe TX-A2D is a complete unbalanced stereo line-level audio output module. The front panel provides a detachable terminal block for connecting each channel of a balanced +4 dBu audio source. The input signals are coupled to two front-panel gold plated phono jacks through studio-quality isolation transformers. Each output is coupled through an attenuation network that produces a nominal -10 dBV level. Shielding is provided by the TX-A2D's heavy duty aluminum enclosure. \u003cbr\u003e\u003cbr\u003eWherever professional format audio signals need to be converted to an unbalanced line level, the TX-A2 and TX-A2D are an ideal choice. Use them individually or in conjunction with other RDL products as part of a complete audio\/video system.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444024017080,"sku":"72612","price":155.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/72612_RDL-TX-A2D-Dual-Audio-Converter-Balanced-to-Unbalanced.jpg?v=1768243224"},{"product_id":"rdl-tx-afc1m-unbalanced-to-balanced-audio-transformer","title":"RDL TX-AFC1M Unbalanced to Balanced Audio Transformer","description":"\u003cp\u003eThe TX-AFC1M from RDL is an unbalanced to balanced audio transformer.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444024082616,"sku":"72613","price":136.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/72613_RDL-TX-AFC1M-Unbalanced-to-Balanced-Audio-Transformer.jpg?v=1768243226"},{"product_id":"rdl-tx-j2-unbalanced-input-transformer","title":"RDL TX-J2 Unbalanced Input Transformer","description":"\u003cp\u003eThe RDL TX-J2 Unbalanced Input Transformer results in unbalanced stereo inputs to summed balanced mono output.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444024246456,"sku":"72615","price":86.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/72615_RDL-TX-J2-Unbalanced-Input-Transformer.jpg?v=1768243228"},{"product_id":"rdl-tx-lc2-unbalanced-to-balanced-line-combiner","title":"RDL TX-LC2 Unbalanced to Balanced Line Combiner","description":"\u003cp\u003eThe TX-LC2 is the ideal choice in installations requiring the active, isolated mixing of two unbalanced line-level audio sources to feed a balanced (or unbalanced) audio input.\u003c\/p\u003e \u003cp\u003eThe input circuits are high-impedance, line-level (-10 dBV) and are isolated from each other. Therefore the modules may be used to bridge an unbalanced stereo source without affecting the stereo separation. The output from the TX-LC2 is a mono mix of the stereo signal. Gain of the combined signals is adjustable from -10 to +10 dB (rel. +4 dBu output).\u003c\/p\u003e \u003cp\u003eThe TX-LC2 may also be used to mix two separate sources into a single output. The mixing circuit in the module is an active summing amplifier.\u003c\/p\u003e \u003cp\u003eThe output driver provides a 150 balanced source to drive high or low impedance, balanced or unbalanced lines.\u003c\/p\u003e \u003cp\u003eThe input connectors make connection of the TX-LC2 easy. The broad gain range makes the TX-LC2 ideally suited to any installation where a balanced mono signal is needed from a stereo unbalanced source, particularly low-output consumer products such as certain televisions.\u003c\/p\u003e \u003cp\u003eUse the TX-LC2 individually, or combine it with other RDL modules and accessories as part of a complete audio\/video system.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444024311992,"sku":"72616","price":142.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/72616_RDL-TX-LC2-Unbalanced-to-Balanced-Line-Combiner.jpg?v=1768243231"},{"product_id":"rdl-ru-lb2-line-level-bi-directional-network-interface","title":"RDL RU-LB2 Line-Level Bi-Directional Network Interface","description":"\u003cp\u003eThe RU-LB2 modules are Dante audio network interface products compatible with line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial\/industrial installations.\u003c\/p\u003e \u003cp\u003eAPPLICATION: The RU-LB2 is a high quality converter that provides professional line-level outputs from two Dante network received audio channels. It also converts two professional or consumer line-level sources to Dante network audio channels.\u003c\/p\u003e \u003cp\u003eThe RU-LB2 converts two Dante audio channels to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level.\u003c\/p\u003e \u003cp\u003eOne front-panel green signal LED corresponds to each of the two Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location.\u003c\/p\u003e \u003cp\u003eThe RU-LB2 converts two line-level audio sources to Dante networked digital audio channels. Each input is equipped with a front-panel gain trimmer and associated Dual-LED VU meter to facilitate optimal input gain adjustment. Each input supports the complete range of normal unbalanced -10 dBV and balanced +4 dBu line-level sources. Input gain adjusted according to the Dual-LED VU meter assures an operating level that preserves full headroom with the lowest noise floor.\u003c\/p\u003e \u003cp\u003eThe RU-LB2 is powered from an external 24 Vdc power supply, available separately. The RU-LB2P is equipped to operate from a PoE enabled network switch. The RU-LB2P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-LB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.\u003c\/p\u003e \u003cp\u003eThe RU-LB2’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems.\u003c\/p\u003e \u003cp\u003eThe RU-LB2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444074643640,"sku":"74072","price":652.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/74072_RDL-RU-LB2-Line-Level-Bi-Directional-Network-Interface.jpg?v=1768243874"},{"product_id":"rdl-ams-xlf-3-pin-xlrf-jack-terminal-block","title":"RDL AMS-XLF 3-Pin XLRF Jack Terminal Block","description":"\u003cp\u003eThe AMS-XLF is a metal female XLR connector equipped with a high-quality terminal block for audio connections. The connector mounts in AMS mounting frames and in standard D-style cutouts.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Default Title","offer_id":51444337180856,"sku":"76777","price":13.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/76777_RDL-AMS-XLF-3-Pin-XLRF-Jack-Terminal-Block.jpg?v=1768250010"},{"product_id":"rdl-cp-1-single-cover-plate","title":"RDL CP-1 Single Cover Plate | Color: White","description":"\u003cp\u003eFor use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels. Compatible with Decora style products and American electrical boxes.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"White","offer_id":51444337868984,"sku":"76783","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/76783_RDL-CP-1-Single-Cover-Plate.jpg?v=1768250015"},{"product_id":"rdl-cp-1b-single-cover-plate","title":"RDL CP-1 Single Cover Plate | Color: Black","description":"\u003cp\u003eFor use with RDL SMB-1, DC-1 and WB-1U for mounting RDL remote controls and jack panels. Compatible with Decora style products and American electrical boxes.\u003c\/p\u003e ","brand":"RDL","offers":[{"title":"Black","offer_id":51444338000056,"sku":"76784","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/76784_RDL-CP-1-Single-Cover-Plate.jpg?v=1768250017"}],"url":"https:\/\/soundpro.com\/collections\/rdl.oembed?page=11","provider":"SoundPro","version":"1.0","type":"link"}