{"title":"Speaker Processors","description":null,"products":[{"product_id":"dbx-pa2-v-tw","title":"dbx DriveRack PA2 Speaker Management System","description":"\u003cp\u003eThe DriveRack PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx's proprietary AutoEQ and AFS algorithms, a new input delay module for delaying the FOH system to the backline, Ethernet control via an Android, iOS, Mac, or Windows device, and updated Wizards, the DriveRack PA2 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.\u003c\/p\u003e ","brand":"Harman Professional, Inc.","offers":[{"title":"Default Title","offer_id":51124433420472,"sku":"18172","price":655.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/18172_dbx-DriveRack-PA2-Speaker-Management-System.jpg?v=1767912665"},{"product_id":"dbx-dbxrta-m","title":"dbx RTA-M Omni Reference Microphone","description":"\u003cp\u003eThe optional RTA-M real time audio analyzing mic is the perfect accessory tool for the DriveRack PA series (PA, PX, PA+, PA2) and 260. Used in conjunction with the System Setup Wizard and Auto EQ Wizard the RTA-M is ideal for optimizing the sound quality of even the most difficult of acoustic environments.\u003c\/p\u003e \u003cp\u003eThe RTA-M is an omni-directional, flat frequency measurement microphone specially designed for the Driverack series to pick up all frequencies from 20 Hz to 20 kHz , ensuring accurate \"pinking\"\/real-time analysis of your audio. It runs on phantom power (supplied by the Driverack units) and comes with a clip and case.\u003c\/p\u003e ","brand":"Harman Professional, Inc.","offers":[{"title":"Default Title","offer_id":51124434600120,"sku":"19091","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/19091_dbx-RTA-M-Omni-Reference-Microphone.jpg?v=1767913006"},{"product_id":"dbx-dbx260v","title":"dbx 260V DriveRack 260 2x6 Speaker Management System","description":"\u003cp\u003eThere is a reason that Tour Sound Professionals and discriminating Audio Contractors choose dbx DriveRack products for their high-end tours and installs. The DriveRack products provide the tools that ensure that the system sounds its very best. With the introduction of the new 260, the heritage of unrivaled system\/loudspeaker control continues. The 260 capitalizes on the road tested and contractor approved nature of the other products in the DriveRack line. The 260 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. Contractors will appreciate its control inputs for wall-panel logic control and the patent-pending Advanced Feedback Suppression (AFS).\u003c\/p\u003e \u003cp\u003eThe DriveRack 260 continues the legacy of DriveRack series, which has been created by the company that has been redefining the standard of signal processing for more than 30 years. The DriveRack 260 was designed with the purpose and vision of providing state-of-the-art signal processing, while utilizing a simple and intuitive user interface. This goal has been achieved by offering two independent channels of processing power with a linkable 28-Band Graphic Equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts) and alignment delay. These features combined with the Wizard setup system and complete DriveWare GUI control represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system.\u003c\/p\u003e ","brand":"Harman Professional, Inc.","offers":[{"title":"Default Title","offer_id":51124685603000,"sku":"48863","price":945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/48863_dbx-260V-DriveRack-260-2x6-Speaker-Management-System.jpg?v=1768004325"},{"product_id":"rdl-001-3545","title":"RDL RU-NFD Network to Format-A Interface\/Distributor","description":"\u003cp\u003eThe RU-NFD modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial\/industrial installations.\u003c\/p\u003e \u003cp\u003eAPPLICATION: The RU-NFD is an RDL Format-A sender\/distributor that connects to a Dante-enabled network. It converts three Dante audio channels to RDL Format-A. Each network channel corresponds to Pair A, B or C of the Format-A outputs. The unit converts a fourth Dante audio channel to a balanced line-level AUX output.\u003c\/p\u003e \u003cp\u003eOne front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location.\u003c\/p\u003e \u003cp\u003eThe Format-A output is distributed to three separate rear-panel RJ45 jacks. Each Format-A output jack provides up to 200 mA of power to connected Format-A receivers. Multiple receivers may be daisy chained from one output jack, or may be connected by home run to each of the three outputs. Higher current Format-A receivers, such as RDL D-PSP1A powered Decora-style speakers, are to be individually connected to a separate output jack.\u003c\/p\u003e \u003cp\u003eThe RU-NFD output jacks support the entire range of Format-A receivers, making each output pair available for end-user connection on various wall plates, or feeding other equipment using rack-mounted, shelf-mounted or utility Format-A receivers. The wide array of Format-A receivers provide compatibility with commercial audio equipment operating at standard professional levels. High resolution digital audio converters coupled with RDL’s renowned analog filters provide superior fidelity with a very low noise floor. Each Format-A receiver may be connected near the RU-NFD or up to several thousand feet distant.\u003c\/p\u003e \u003cp\u003eThe RU-NFD is powered from an external 24 Vdc power supply, available separately. The external supply powers the RU-NFD and Format-A receivers connected to all three Format-A outputs. The RU-NFDP is equipped for PoE which powers the RU-NFD and Format-A receivers connected to the primary Format-A output jack. Audio is also distributed to the other two output jacks. Remote Format-A receivers connected to those other two output jacks are only powered from the RU-NFDP if an external 24 Vdc power supply is connected. If PoE power and an external 24 Vdc supply are both feeding an RU-NFDP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external 24 V supply. The power feeding each Format-A RJ45 connector is separately protected by an automatically resetting fuse. A power LED is associated with each connector, facilitating identification of wiring faults.\u003c\/p\u003e \u003cp\u003ePoE relies on the use of a PoE enabled network switch. The RU-NFDP will reserve power from the switch even while being powered from an external 24 Vdc supply.\u003c\/p\u003e \u003cp\u003eThe RU-NFD is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.\u003c\/p\u003e ","brand":"Radio Design Labs","offers":[{"title":"Default Title","offer_id":51124783546552,"sku":"74079","price":761.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/74079_RDL-RU-NFD-Network-to-Format-A-Interface-Distributor.jpg?v=1768243879"},{"product_id":"atlasied-bb-88","title":"AtlasIED BB-88 BlueBridge Networkable DSP Device | 8 Input x 8 Output | Without Dante","description":"\u003cp\u003eThe AtlasIED BB-88 is a professional networkable DSP processor built for system integrators and AV designers who need scalable, reliable signal processing across complex installed environments. With eight balanced inputs and eight balanced outputs on Phoenix-style connectors, it handles routing, equalization, crossover, dynamics, and mixing for demanding applications including house of worship, conference rooms, courtrooms, video conferencing systems, multi-zone paging, room combining, and background music distribution.\u003c\/p\u003e\u003cp\u003eUnlike fixed-architecture DSP units, the BB-88 uses AtlasIED's open-architecture BlueBridge drag-and-drop software platform, giving designers the flexibility to build signal flows tailored to each project rather than working within preset templates. The 40-bit floating point DSP engine prevents the digital clipping common in competing products at this price point, while THAT Corp microphone preamps and 24-bit converters deliver an ultra-low noise floor suited to speech intelligibility and critical listening environments. Ethernet connectivity enables TCP\/IP control and third-party integration without additional hardware for most deployments.\u003c\/p\u003e\u003cp\u003eThe BB-88 also integrates with AtlasIED's BluePanel software, allowing designers to build custom end-user control interfaces accessible over the network, including programming of the BB-TOUCH7 wall panel for volume, source selection, and room combining — keeping core DSP settings locked from unauthorized adjustment. Four logic inputs and outputs extend automation and control capabilities for complex system designs.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"Without Dante \/ 8 Input x 8 Output","offer_id":51438526824632,"sku":"13868","price":3804.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/13868_AtlasIED-BB-88-8x8-Networkable-DSP-Audio-Processor.jpg?v=1767901958"},{"product_id":"atlasied-bb-88dt","title":"AtlasIED BB-88DT BlueBridge Networkable DSP Device | 8 Input x 8 Output | With Dante","description":"\u003cp\u003eThe AtlasIED BB-88DT is built for AV integrators and system designers who need a flexible, networkable DSP platform across demanding installed environments. Targeting applications including house of worship, conferencing, courtrooms, multi-zone paging, and room combining, the BB-88DT delivers mission-critical processing without the complexity or cost of proprietary control ecosystems. Its open-architecture BlueBridge software environment allows drag-and-drop signal flow design, making it accessible to design teams working across varied project scopes.\u003c\/p\u003e\u003cp\u003eWhere competitive DSP units rely on fixed-point processing and risk digital clipping in complex signal chains, the BB-88DT employs a 40-bit floating point engine that preserves headroom through layered algorithms. Dante integration adds 8 channels of plug-and-play digital audio over standard Ethernet, enabling straightforward expansion into existing Dante-networked facilities without dedicated audio cabling infrastructure. THAT Corp microphone preamps and 24-bit converters maintain a 110dB dynamic range, satisfying the signal integrity demands of speech-intelligibility-critical environments like courtrooms and boardrooms.\u003c\/p\u003e\u003cp\u003eSystem control is handled over TCP\/IP, with the optional BluePanel software allowing designers to build custom user interfaces accessible from networked computers or wall controllers such as the BB-TOUCH7. This keeps end-user access limited to designer-defined parameters, preventing unauthorized changes to system configuration — a key requirement in installed AV contracts where post-commissioning stability is expected.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"With Dante \/ 8 Input x 8 Output","offer_id":51438526890168,"sku":"13869","price":4591.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/13869_AtlasIED-BB-88DT-BlueBridge-Networkable-DSP-Device-_-8-Input-x-8-Output-_-With-Dante_ALT01sqr.jpg?v=1790198220"},{"product_id":"yamaha-dsp-rx-ex-rivage-series-dsp-engine","title":"Yamaha DSP-RX-EX RIVAGE Series DSP Engine","description":"\u003cp\u003eTake control of your RIVAGE PM system’s signal processing and system control with the DSP-RX-EX from Yamaha. RIVAGE PM’s audio systems are ideal for achieving professional polish in live sound applications, boasting over 50 included plugins and ample processing power. With the DSP-RX-EX, you can expand that processing capability even further, allowing up to 256 instances of complex plug-ins to be used simultaneously.\u003c\/p\u003e ","brand":"Yamaha Corporation of America","offers":[{"title":"Default Title","offer_id":51443322978488,"sku":"54203","price":34143.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/54203_Yamaha-DSP-RX-EX-RIVAGE-Series-DSP-Engine_ALT1sqr.jpg?v=1776463180"},{"product_id":"atlasied-azm8","title":"AtlasIED AZM8 Atmosphere Audio Processor | 8-Zone","description":"\u003cp\u003eThe AtlasIED AZM8 is designed for AV integrators specifying distributed audio systems in commercial installations — from corporate offices and houses of worship to education facilities and hospitality venues. As the processing core of the Atmosphere audio control system, it handles zone routing, DSP, ambient noise compensation, and scheduling without requiring a separate mixing console or third-party DSP platform.\u003c\/p\u003e\u003cp\u003eWhere the AZM8 stands apart from generic zone processors is its integrated ecosystem approach. Four accessory ports support up to 16 plug-and-play wall plate controllers and sensors — each port rated to 1,000 feet — eliminating the need for external control interfaces in most installs. The built-in message player and bell scheduler reduce reliance on additional playback hardware, while the Tilter Filter and learning ambient noise sensing automate gain and EQ adjustments that would otherwise require manual tuning or separate control logic.\u003c\/p\u003e\u003cp\u003eProgramming is handled through an on-board Progressive Web App interface accessible via Ethernet or the built-in Wi-Fi access point, meaning tablets and laptops connect directly without dedicated software installs. Third-party control is supported through certified modules for Crestron, RTI, Extron, and AMX, making the AZM8 a practical fit for enterprise-grade automation environments where the processor must integrate cleanly into an existing control infrastructure.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"8-Zone","offer_id":51443427606712,"sku":"57781","price":2306.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/57781_AtlasIED-AZM8-Atmosphere-Audio-Processor-_-8-Zone_ALT01sqr.jpg?v=1790198160"},{"product_id":"atlasied-azm4","title":"AtlasIED AZM4 Atmosphere Audio Processor | 4-Zone","description":"\u003cp\u003eThe AtlasIED AZM4 is the central processor of the Atmosphere audio control ecosystem, designed for commercial integrators managing multi-zone audio in restaurants, retail environments, houses of worship, schools, and corporate facilities. Unlike simple DSP crossovers, the AZM4 combines processing power with automated system intelligence — handling ambient noise compensation, loud noise detection, room combining, and scheduled paging from a single rackmount unit.\u003c\/p\u003e\u003cp\u003eIntegrators working with third-party control systems will find native module support for RTI, Crestron, Extron, and AMX, reducing programming overhead and ensuring reliable interoperability. Up to 16 plug-and-play wall plate accessories and sensors connect across two dedicated accessory ports, each rated to 1,000 feet, giving installers flexible topology without added infrastructure cost.\u003c\/p\u003e\u003cp\u003eSystem setup and ongoing management are handled through a Progressive Web App interface accessible via Ethernet or the unit's onboard Wi-Fi access point — no proprietary software installation required. The device-agnostic interface supports tablets and laptops directly on-site, making commissioning and adjustments straightforward for both initial install and service visits. A large library of AtlasIED speaker presets further reduces tuning time in the field.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"4-Zone","offer_id":51443505692856,"sku":"60514","price":1558.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/60514_AtlasIED-AZM4-ATMOSPHERE-4-Zone-Audio-Processor.jpg?v=1768241010"},{"product_id":"art-cx311-stereo-2-way-crossover-with-subwoofer-out","title":"ART CX311 Stereo 2-Way Crossover with Subwoofer Out","description":"\u003cp\u003eThe CX311 from ART is two-way stereo crossover network with an additional subwoofer output for low-end frequency reinforcement. It employs 24dB\/octave state-variable, Fourth-order Linkwitz-Riley filters that guarantee properly phased outputs at all frequencies which is optimal for the proper acoustic summing of common signals from adjacent drivers in the crossover region.\u003c\/p\u003e ","brand":"Yorkville Sound","offers":[{"title":"Default Title","offer_id":51444706902200,"sku":"88019","price":154.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/88019_ART-CX311-Stereo-2-Way-Crossover-with-Subwoofer-Out.jpg?v=1768253954"},{"product_id":"atlasied-azmp4","title":"AtlasIED AZMP4 4-Zone Powered Audio Processor With Amplifier","description":"\u003cp\u003eThe AtlasIED AZMP4 is engineered for AV integrators designing automated installed audio systems in commercial, educational, and hospitality environments. Serving as the central processing and amplification hub for an Atmosphere audio control system, it combines a 600-watt amplifier with advanced DSP in a single rack unit, eliminating the need for separate processor and amplifier hardware in most four-zone deployments.\u003c\/p\u003e\u003cp\u003ePower sharing amplifier technology sets the AZMP4 apart from conventional fixed-channel amplifiers. Rather than assigning a static wattage ceiling per zone, the system allocates available power dynamically via software, with each output channel assignable anywhere in the full operating range. This prevents the costly overdesign that plagues traditional amplifier-per-zone approaches, while still meeting peak demand across zones. A learning ambient noise sensor, Tilter Filter, auto-gain, loud noise detection, and a full sound masking suite give integrators precise environmental control without manual recalibration.\u003c\/p\u003e\u003cp\u003eCommissioning is handled through a Progressive Web App interface accessible over Ethernet or the unit's built-in Wi-Fi access point, making it device-agnostic and practical for field programming from a tablet or laptop. Accessory ports support up to 16 plug-and-play Atmosphere wall plates and sensors at distances up to 1,000 feet, and third-party control integration is available for RTI, Crestron, Extron, and AMX platforms, fitting cleanly into existing control infrastructure.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"Default Title","offer_id":51445641347256,"sku":"139416","price":3043.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/139416_AtlasIED-AZMP4-Atmosphere-4-Zone-Signal-Processor.jpg?v=1768875814"},{"product_id":"atlasied-azmp8","title":"AtlasIED AZMP8 8-Zone Atmosphere Audio Processor with Amplifier | Without Dante","description":"\u003cp\u003eThe AtlasIED AZMP8 is engineered for integrators designing multi-zone installed audio systems in commercial, hospitality, education, and corporate environments. As the processing core of an Atmosphere control system, it combines an 8-zone DSP engine with a 1200W amplifier in a single unit, eliminating the need for separate racks of amplifiers and processors and reducing both cost and system complexity.\u003c\/p\u003e\u003cp\u003eFor AV integrators and system designers, the AZMP8 addresses real-world install challenges with features like ambient noise sensing with Tilter Filter auto-gain compensation, room combine and grouping logic, a built-in bell scheduler, and a message player — all configurable without third-party software. The amplifier power sharing architecture allows each output channel to be software-assigned anywhere from 5 to 600W, enabling efficient power allocation across zones rather than locking in fixed per-channel ratings that lead to system overdesign.\u003c\/p\u003e\u003cp\u003eProgramming and commissioning are handled through an on-board progressive web app interface that is device-agnostic and accessible over Ethernet or built-in Wi-Fi. Up to 16 plug-and-play Atmosphere wall plate accessories and paging stations can connect across four accessory ports, each rated to 1,000 feet. Third-party control system integration is supported for RTI, Crestron, Extron, and AMX, making the AZMP8 a practical fit for facilities requiring unified AV and building control.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"Without Dante","offer_id":51445641380024,"sku":"139417","price":4839.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/139417_AtlasIED-AZMP8-Atmosphere-8-Zone-Signal-Processor.jpg?v=1768875821"},{"product_id":"atlasied-x-zps","title":"AtlasIED X-ZPS Atmosphere Zone Paging Station With Touchscreen","description":"\u003cp\u003eThe AtlasIED X-ZPS is engineered for installed audio environments where distributed paging and system control need to be accessible and reliable. Designed exclusively for use with the Atmosphere AZM and AZMP audio processors, it gives operators direct control over zone paging, all-call broadcasts, custom group paging, volume adjustment, source selection, and message recall — all from a single wall-mounted station.\u003c\/p\u003e\u003cp\u003eBuilt on the Atmosphere accessory bus architecture, the X-ZPS connects via a single accessory port alongside up to seven other Atmosphere accessories, transmitting both audio and data reliably over runs up to 1,000 feet per port. This plug-and-play design eliminates custom programming overhead and reduces commissioning time for integrators working in commercial installs, houses of worship, educational facilities, or corporate campuses.\u003c\/p\u003e\u003cp\u003eThe station's color touchscreen keeps operator interaction intuitive without requiring dedicated AV staff, while the integrated gooseneck microphone ensures clear, consistent paging pickup at the source. For projects built around the Atmosphere ecosystem, the X-ZPS is the purpose-built control point that completes the paging workflow.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"Default Title","offer_id":51445641445560,"sku":"139418","price":801.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/139418_AtlasIED-X-ZPS-Atmosphere-Zone-Paging-Station.jpg?v=1768875828"},{"product_id":"das-audio-integral-m26x-rackmount-digital-signal-processor","title":"DAS Audio INTEGRAL-M26X Rackmount Digital Signal Processor","description":"\u003cp\u003eThe DAS Audio INTEGRAL-M26X, a 1U rack-mount digital signal processor, features two analogue input channels and six analogue output channels equipped with balanced XLR connectors. Its compact, cost-effective design makes it a versatile choice for live and installed PA systems.\u003c\/p\u003e\u003cp\u003eRemote control and monitoring are possible via ALMA™ software using IP technology, or alternatively, it can be managed using external controllers through OSC messages. Direct unit control is facilitated through a 1.54” OLED display with control buttons for basic parameters. These include input and output levels, preset recalls, mute, source selection, and link manager functions.\u003c\/p\u003e\u003cp\u003eThe device houses a complete signal processing matrix, offering gain, delay, routing, equalization, and limiters adjustment options. Its internal memory can store over 100 global presets and 200+ output channel presets, including specific presets for all DAS Audio speakers.\u003c\/p\u003e\u003cp\u003eExternal control is further simplified through a General-Purpose Input \/ Output (GPIO) connector, providing an external 3V3 volt, GND signal, and 8 configurable pins via ALMA™ software.\u003c\/p\u003e ","brand":"D.A.S. Audio of America","offers":[{"title":"Default Title","offer_id":51445743878328,"sku":"143634","price":1288.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/143634_DAS-Audio-INTEGRAL-M26X-Rackmount-Digital-Signal-Processor.jpg?v=1768879765"},{"product_id":"nexo-dme10-audio-processor","title":"Nexo DME10 Audio Processor","description":"\u003cp\u003eBuilt on the tried and tested Yamaha DME platform, the NEXO DME10 goes a step further than any other immersive processor by unlocking its raw processing power to users and allowing near limitless customization. A 256 x 256 channel open architecture processor , DME10 ships with 32 object inputs \/ 16 speaker outputs included as standard, expandable in blocks of 32 x 16, 64 x 32 and 128 x 64 via a flexible licensing structure. Need the full channel count for a show today but two completely independent 64 channel immersive processors tomorrow? You can do that .With superior musical expression and sound field design, DME10 features 96kHz processing and is equipped with a wide range of DSP components that can be freely selected, connected, and configured, allowing for flexible system construction. And such is the processing power of the DME10, separate speaker system and immersive processors are no longer required. It's all inside DME10.Need more than the 8 channels of parametric EQ per channel or some more dynamics at a specific point in the signal chain of your immersive design? No problem. Running 128 x 64 immersive processing only uses around 50% of the DME10's processing resource.\u003c\/p\u003e","brand":"Yamaha Corporation of America","offers":[{"title":"Default Title","offer_id":52174598832312,"sku":"151333","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/151333_Nexo-DME10-Audio-Processor.jpg?v=1768919204"},{"product_id":"ashly-audio-ne24-24mt-8x8-120v-u","title":"Ashly ne24.24mt (8x8) Protea Dsp Audio Matrix Processor 8-In X 8-Out","description":"\u003cp\u003eThe Ashly ne24.24mt (8x8) is a Network Enabled Protea DSP audio matrix processor featuring 8 inputs and 8 outputs, with setup and control via standard 10\/100 Ethernet and RS-232 using Protea NE Software.\u003c\/p\u003e\u003cp\u003eIt uses modular expansion cards to support up to 24 channels of audio matrixing and processing, allowing any input to be routed to any output, making it ideal for boardrooms, houses of worship, auditoriums, and other zoned sound installations.\u003c\/p\u003e","brand":"Ashly Audio","offers":[{"title":"Default Title","offer_id":52248098275512,"sku":"135942","price":2699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/ne24.24mt8x8.jpg?v=1784671317"},{"product_id":"martinaud-dx0-4","title":"Martin Audio DX0.4 2x4 Dsp loudspeaker processor","description":"\u003cp\u003eThe DX0.4 is the ideal processing tool to partner the ADORN, CDD and BlacklineX ranges or indeed any system where comprehensive system control and protection is required, perhaps where there may be budget constraints.\u003c\/p\u003e","brand":"Focusrite (Martin Audio Products)","offers":[{"title":"Default Title","offer_id":52401351950520,"sku":"139343","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/TMP-DX0.4_5ae5c8db-ec23-47e9-a864-2ba268b0572b.jpg?v=1785874665"},{"product_id":"jbl-dur386612","title":"JBL DUR386612 Universal Programming Set For Axys And Intellivox","description":"\u003cp\u003eA USB signal can be converted to an RS-485 signal with the JBL DUR386612 USB to RS485 Converter. This enables USB devices to be connected to RS-485 networks. Numerous JBL professional audio equipment, such as the AXYS and Intellivox series, are compatible with the converter.\u003c\/p\u003e","brand":"Harman Professional, Inc.","offers":[{"title":"Default Title","offer_id":52444614426808,"sku":"35775","price":910.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/dur386612.jpg?v=1784668929"},{"product_id":"jbl-intonato24fx","title":"JBL INTONATO24FX","description":"\u003cp\u003eJBL Professional 24-Channel Monitor Management Tuning System\u003c\/p\u003e","brand":"Harman Professional, Inc.","offers":[{"title":"Default Title","offer_id":52444615704760,"sku":"35779","price":3799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/INTONATO24FX_e0582b1a-0f08-4e05-af02-2367c879f45c.jpg?v=1785871037"},{"product_id":"jbl-intonato-dc-m","title":"JBL INTONATO-DC-M","description":"\u003cp\u003eJBL Intonato Desktop Controller - 2.8\" Height x 4.7\" Width - Anodized Aluminum\u003c\/p\u003e","brand":"Harman Professional, Inc.","offers":[{"title":"Default Title","offer_id":52444615966904,"sku":"35780","price":1109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/INTONATO-DC-M_d8b7d3d2-997e-4496-9556-82aa8ff61d0d.jpg?v=1785871022"},{"product_id":"atlasied-bb-1616","title":"AtlasIED BB-1616 BlueBridge Networkable DSP Device | 16 Input x 16 Output | Without Dante","description":"\u003cp\u003eThe AtlasIED BlueBridge family is purpose-built for AV integrators who need a scalable, networkable DSP platform across demanding installed environments — from house of worship and courtrooms to conference rooms, multi-zone restaurants, and campus paging systems. Each unit auto-recognizes on the network during setup, making commissioning straightforward without requiring a dedicated control network in applications where TCP\/IP control is not needed after deployment.\u003c\/p\u003e\u003cp\u003eWhere BlueBridge separates itself from competing DSP platforms is its 40-bit floating point processing engine, which eliminates digital clipping even under complex algorithm loads, and its THAT Corp microphone preamps paired with 24-bit converters — yielding an ultra-low noise floor suited to speech intelligibility-critical spaces. The open architecture drag-and-drop software environment gives system designers full control without proprietary programming lock-in, and the BluePanel interface lets integrators build end-user control screens accessible via networked computers or programmed wall controllers like the BB-TOUCH7 touch panel.\u003c\/p\u003e\u003cp\u003eThe processing module library covers the full range of installed audio signal management needs: gain-sharing and gating auto-mixers for multi-mic conferencing, parametric and graphic EQ, anti-feedback, Butterworth, Linkwitz-Riley, and Bessel crossovers with slopes from 6 to 48dB per octave, dynamics processing including compression, limiting, and ducking, plus signal generators for system verification. Pre-configured design templates from AtlasIED's BlueBridge training program provide certified integrators with validated starting points for common deployment types, reducing design time on repeat project categories.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"Without Dante \/ 16 Input x 16 Output","offer_id":52445640655032,"sku":"13861","price":5767.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/13861_ATLAS-BB-1616_ALT01.jpg?v=1783370721"},{"product_id":"atlasied-bb-168","title":"AtlasIED BB-168 BlueBridge Networkable DSP Device | 16 Input x 8 Output | Without Dante","description":"\u003cp\u003eThe AtlasIED BlueBridge family is purpose-built for AV integrators who need a scalable, networkable DSP platform across demanding installed environments — from house of worship and courtrooms to conference rooms, multi-zone restaurants, and campus paging systems. Each unit auto-recognizes on the network during setup, making commissioning straightforward without requiring a dedicated control network in applications where TCP\/IP control is not needed after deployment.\u003c\/p\u003e\u003cp\u003eWhere BlueBridge separates itself from competing DSP platforms is its 40-bit floating point processing engine, which eliminates digital clipping even under complex algorithm loads, and its THAT Corp microphone preamps paired with 24-bit converters — yielding an ultra-low noise floor suited to speech intelligibility-critical spaces. The open architecture drag-and-drop software environment gives system designers full control without proprietary programming lock-in, and the BluePanel interface lets integrators build end-user control screens accessible via networked computers or programmed wall controllers like the BB-TOUCH7 touch panel.\u003c\/p\u003e\u003cp\u003eThe processing module library covers the full range of installed audio signal management needs: gain-sharing and gating auto-mixers for multi-mic conferencing, parametric and graphic EQ, anti-feedback, Butterworth, Linkwitz-Riley, and Bessel crossovers with slopes from 6 to 48dB per octave, dynamics processing including compression, limiting, and ducking, plus signal generators for system verification. Pre-configured design templates from AtlasIED's BlueBridge training program provide certified integrators with validated starting points for common deployment types, reducing design time on repeat project categories.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"Without Dante \/ 16 Input x 8 Output","offer_id":52445640851640,"sku":"13863","price":5179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/13863_ATLAS-BB-168_ALT01.jpg?v=1783370776"},{"product_id":"atlasied-bb-168aecdt","title":"AtlasIED BB-168AECDT BlueBridge Networkable DSP Device | 16 Input x 8 Output | With Dante Support and Acoustic Echo Cancellation","description":"\u003cp\u003eThe AtlasIED BlueBridge family is purpose-built for AV integrators who need a scalable, networkable DSP platform across demanding installed environments — from house of worship and courtrooms to conference rooms, multi-zone restaurants, and campus paging systems. Each unit auto-recognizes on the network during setup, making commissioning straightforward without requiring a dedicated control network in applications where TCP\/IP control is not needed after deployment.\u003c\/p\u003e\u003cp\u003eWhere BlueBridge separates itself from competing DSP platforms is its 40-bit floating point processing engine, which eliminates digital clipping even under complex algorithm loads, and its THAT Corp microphone preamps paired with 24-bit converters — yielding an ultra-low noise floor suited to speech intelligibility-critical spaces. The open architecture drag-and-drop software environment gives system designers full control without proprietary programming lock-in, and the BluePanel interface lets integrators build end-user control screens accessible via networked computers or programmed wall controllers like the BB-TOUCH7 touch panel.\u003c\/p\u003e\u003cp\u003eThe processing module library covers the full range of installed audio signal management needs: gain-sharing and gating auto-mixers for multi-mic conferencing, parametric and graphic EQ, anti-feedback, Butterworth, Linkwitz-Riley, and Bessel crossovers with slopes from 6 to 48dB per octave, dynamics processing including compression, limiting, and ducking, plus signal generators for system verification. Pre-configured design templates from AtlasIED's BlueBridge training program provide certified integrators with validated starting points for common deployment types, reducing design time on repeat project categories.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"With Dante Support and Acoustic Echo Cancellation \/ 16 Input x 8 Output","offer_id":52445640982712,"sku":"13864","price":7209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/13864_ATLAS-BB-168AECDT_ALT01.jpg?v=1783370801"},{"product_id":"atlasied-bb-168dt","title":"AtlasIED BB-168DT BlueBridge Networkable DSP Device | 16 Input x 8 Output | With Dante Support","description":"\u003cp\u003eThe AtlasIED BlueBridge family is purpose-built for AV integrators who need a scalable, networkable DSP platform across demanding installed environments — from house of worship and courtrooms to conference rooms, multi-zone restaurants, and campus paging systems. Each unit auto-recognizes on the network during setup, making commissioning straightforward without requiring a dedicated control network in applications where TCP\/IP control is not needed after deployment.\u003c\/p\u003e\u003cp\u003eWhere BlueBridge separates itself from competing DSP platforms is its 40-bit floating point processing engine, which eliminates digital clipping even under complex algorithm loads, and its THAT Corp microphone preamps paired with 24-bit converters — yielding an ultra-low noise floor suited to speech intelligibility-critical spaces. The open architecture drag-and-drop software environment gives system designers full control without proprietary programming lock-in, and the BluePanel interface lets integrators build end-user control screens accessible via networked computers or programmed wall controllers like the BB-TOUCH7 touch panel.\u003c\/p\u003e\u003cp\u003eThe processing module library covers the full range of installed audio signal management needs: gain-sharing and gating auto-mixers for multi-mic conferencing, parametric and graphic EQ, anti-feedback, Butterworth, Linkwitz-Riley, and Bessel crossovers with slopes from 6 to 48dB per octave, dynamics processing including compression, limiting, and ducking, plus signal generators for system verification. Pre-configured design templates from AtlasIED's BlueBridge training program provide certified integrators with validated starting points for common deployment types, reducing design time on repeat project categories.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"With Dante Support \/ 16 Input x 8 Output","offer_id":52445641212088,"sku":"13865","price":5964.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/13865_ATLAS-BB-168DT_ALT01.jpg?v=1783370826"},{"product_id":"atlasied-bb-816","title":"AtlasIED BB-816 BlueBridge Networkable DSP Device | 8 Input x 16 Output | Without Dante","description":"\u003cp\u003eThe AtlasIED BlueBridge family is purpose-built for AV integrators who need a scalable, networkable DSP platform across demanding installed environments — from house of worship and courtrooms to conference rooms, multi-zone restaurants, and campus paging systems. Each unit auto-recognizes on the network during setup, making commissioning straightforward without requiring a dedicated control network in applications where TCP\/IP control is not needed after deployment.\u003c\/p\u003e\u003cp\u003eWhere BlueBridge separates itself from competing DSP platforms is its 40-bit floating point processing engine, which eliminates digital clipping even under complex algorithm loads, and its THAT Corp microphone preamps paired with 24-bit converters — yielding an ultra-low noise floor suited to speech intelligibility-critical spaces. The open architecture drag-and-drop software environment gives system designers full control without proprietary programming lock-in, and the BluePanel interface lets integrators build end-user control screens accessible via networked computers or programmed wall controllers like the BB-TOUCH7 touch panel.\u003c\/p\u003e\u003cp\u003eThe processing module library covers the full range of installed audio signal management needs: gain-sharing and gating auto-mixers for multi-mic conferencing, parametric and graphic EQ, anti-feedback, Butterworth, Linkwitz-Riley, and Bessel crossovers with slopes from 6 to 48dB per octave, dynamics processing including compression, limiting, and ducking, plus signal generators for system verification. Pre-configured design templates from AtlasIED's BlueBridge training program provide certified integrators with validated starting points for common deployment types, reducing design time on repeat project categories.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"Without Dante \/ 8 Input x 16 Output","offer_id":52445641408696,"sku":"13866","price":4852.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/13866_ATLAS-BB-816_ALT01.jpg?v=1783370853"},{"product_id":"atlasied-bb-816dt","title":"AtlasIED BB-816DT BlueBridge Networkable DSP Device | 8 Input x 16 Output | With Dante Support","description":"\u003cp\u003eThe AtlasIED BlueBridge family is purpose-built for AV integrators who need a scalable, networkable DSP platform across demanding installed environments — from house of worship and courtrooms to conference rooms, multi-zone restaurants, and campus paging systems. Each unit auto-recognizes on the network during setup, making commissioning straightforward without requiring a dedicated control network in applications where TCP\/IP control is not needed after deployment.\u003c\/p\u003e\u003cp\u003eWhere BlueBridge separates itself from competing DSP platforms is its 40-bit floating point processing engine, which eliminates digital clipping even under complex algorithm loads, and its THAT Corp microphone preamps paired with 24-bit converters — yielding an ultra-low noise floor suited to speech intelligibility-critical spaces. The open architecture drag-and-drop software environment gives system designers full control without proprietary programming lock-in, and the BluePanel interface lets integrators build end-user control screens accessible via networked computers or programmed wall controllers like the BB-TOUCH7 touch panel.\u003c\/p\u003e\u003cp\u003eThe processing module library covers the full range of installed audio signal management needs: gain-sharing and gating auto-mixers for multi-mic conferencing, parametric and graphic EQ, anti-feedback, Butterworth, Linkwitz-Riley, and Bessel crossovers with slopes from 6 to 48dB per octave, dynamics processing including compression, limiting, and ducking, plus signal generators for system verification. Pre-configured design templates from AtlasIED's BlueBridge training program provide certified integrators with validated starting points for common deployment types, reducing design time on repeat project categories.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"With Dante Support \/ 8 Input x 16 Output","offer_id":52445641867448,"sku":"13867","price":5637.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/13867_ATLAS-BB-816DT_ALT01.jpg?v=1783370879"},{"product_id":"atlasied-mvxa-2016","title":"AtlasIED MVXA-2016 16-Channel Active Audio Monitor Panel","description":"\u003cp\u003eThe AtlasIED MVXA-2016 is built for AV integrators and system technicians who need reliable, simultaneous visual and aural verification of distributed audio circuits — without adding a mixer or signal processor to the chain. Designed around a single-circuit board architecture, it supports up to 16 channels of speaker or line-level input in any combination, making it well-suited for installed paging systems, background music networks, and multi-zone commercial audio environments where 25V, 70V, and 100V distribution coexist.\u003c\/p\u003e\u003cp\u003eWhat sets the MVXA-2016 apart from passive monitoring solutions is its DC-coupled capacitor design at every input, which preserves signal integrity and eliminates ground-loop issues without requiring an input transformer. Each input is individually jumper-calibrated to match its reference level, so a single panel can accurately represent mixed-voltage signal environments at a glance — a genuine advantage when servicing large installed systems with diverse zone configurations.\u003c\/p\u003e\u003cp\u003eFor aural monitoring, the unit offers an internal speaker, front-panel headphone jack, line-level output, and external speaker output, giving technicians multiple options for isolating and listening to individual channels during commissioning or fault diagnosis. The top-panel diagram eliminates guesswork during setup, and the compact 1U form factor keeps rack overhead minimal in equipment rooms where space is always at a premium.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"Default Title","offer_id":52445806854328,"sku":"17902","price":2243.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/17902_ATLAS-MVXA-2016_ALT01sqr.jpg?v=1783443014"},{"product_id":"atlasied-bb-1616dt","title":"AtlasIED BB-1616DT BlueBridge Networkable DSP Device | 16 Input x 16 Output | With Dante Support","description":"\u003cp\u003eThe AtlasIED BlueBridge family is purpose-built for AV integrators who need a scalable, networkable DSP platform across demanding installed environments — from house of worship and courtrooms to conference rooms, multi-zone restaurants, and campus paging systems. Each unit auto-recognizes on the network during setup, making commissioning straightforward without requiring a dedicated control network in applications where TCP\/IP control is not needed after deployment.\u003c\/p\u003e\u003cp\u003eWhere BlueBridge separates itself from competing DSP platforms is its 40-bit floating point processing engine, which eliminates digital clipping even under complex algorithm loads, and its THAT Corp microphone preamps paired with 24-bit converters — yielding an ultra-low noise floor suited to speech intelligibility-critical spaces. The open architecture drag-and-drop software environment gives system designers full control without proprietary programming lock-in, and the BluePanel interface lets integrators build end-user control screens accessible via networked computers or programmed wall controllers like the BB-TOUCH7 touch panel.\u003c\/p\u003e\u003cp\u003eThe processing module library covers the full range of installed audio signal management needs: gain-sharing and gating auto-mixers for multi-mic conferencing, parametric and graphic EQ, anti-feedback, Butterworth, Linkwitz-Riley, and Bessel crossovers with slopes from 6 to 48dB per octave, dynamics processing including compression, limiting, and ducking, plus signal generators for system verification. Pre-configured design templates from AtlasIED's BlueBridge training program provide certified integrators with validated starting points for common deployment types, reducing design time on repeat project categories.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"With Dante Support \/ 16 Input x 16 Output","offer_id":52446199742648,"sku":"44849","price":6554.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/44849_ATLAS-BB-1616DT_ALT01.jpg?v=1783370754"},{"product_id":"rdl-ru-mlb4p-001-3530","title":"RDL RU-MLB4P Mic\/Line Bi-Directional Network Interface","description":"\u003cp\u003eThe RU-MLB4 modules are Dante audio network interface products compatible with microphones and line-level audio equipment inputs and outputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial\/industrial installations. APPLICATION: The RU-MLB4 is a high quality converter that provides professional line-level outputs from four Dante network received audio channels. It also converts four professional or consumer line-level sources, or dynamic or condenser microphones to Dante network audio channels. Network to Line Level Interface Section The RU-MLB4 converts four Dante audio channels to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level. One front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module's location. Mic or Line Level to Network Interface SectionThe RU-MLB4 converts four audio sources to Dante networked digital audio channels. Each input is equipped with a rear-panel input selector the installer sets to mic or line. In the mic position, the balanced input provides P48 phantom to an associated microphone jack. Connection of a dynamic microphone sets the preamplifier gain to 60 dB. Connection of a condenser microphone sets the gain to 40 dB. The automatic gain setting is always active so that no user adjustment is required when changing microphones. In the line position, the balanced input accepts a standard +4 dBu source, and the unbalanced line input terminals accept a -10 dBV source for normal operating level. Separate wiring terminals are provided for balanced and unbalances sources. A front-panel variable-intensity LED indicator is provided for each of the four inputs to facilitate setup. The RU-MLB4 is powered from an external 24 Vdc power supply, available separately. The RU-MLB4P is equipped to operate from a PoE enabled network switch. The RU-MLB4P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an RU-MLB4P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. The RU-MLB4's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. The RU-MLB4 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.\u003c\/p\u003e","brand":"Radio Design Labs","offers":[{"title":"Default Title","offer_id":52446453825720,"sku":"57593","price":987.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/57593_ru-mlb4p_d19043db-ff4b-492c-b2c4-38074246a6f5.jpg?v=1769534993"},{"product_id":"ashly-ne24-24mt-12x12","title":"Ashly ne24.24mt (12x12) Protea Dsp Audio Matrix Processor 12-In X 12-Out","description":"\u003cp\u003eControl and protect your installed sound system with the Ashly Protea NE24.24MT, a network-enabled DSP speaker processor that offers easy setup and control using standard 10\/100 Ethernet protocol and Protea ne software. The ne24.24m has four analog inputs and four analog outputs as standard. Use the four option bays to provide additional I\/O and functionality. This model includes two 4-channel input cards and two 4-channel output cards. The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I\/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.\u003c\/p\u003e","brand":"Ashly Audio","offers":[{"title":"Default Title","offer_id":52450692989112,"sku":"135919","price":3599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/ne24.24mt12x12.jpg?v=1784669358"},{"product_id":"ashly-ne24-24mt-12x4","title":"Ashly ne24.24mt (12x4) Protea Dsp Audio Matrix Processor 12-In X 4-Out","description":"\u003cp\u003eThe ne24.24M uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. Prot?a ne24.24M's base unit offers a 4-input\/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output 4 channels of DSP processing at a time. Matrixing allows you to route any input to any output and control individual levels once they have been assigned.\u003c\/p\u003e","brand":"Ashly Audio","offers":[{"title":"Default Title","offer_id":52450693021880,"sku":"135920","price":2699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/ne24.24mt12x4.jpg?v=1784671316"},{"product_id":"ashly-ne24-24mt-16x8","title":"Ashly ne24.24mt (16x8) Protea Dsp Audio Matrix Processor 16-In X 8-Out","description":"\u003cp\u003eControl and protect your installed sound system with the Ashly Protea NE24.24MT, a network-enabled DSP speaker processor that offers easy setup and control using standard 10\/100 Ethernet protocol and Protea ne software. The ne24.24m has four analog inputs and four analog outputs as standard. Use the four option bays to provide additional I\/O and functionality. This model includes three 4-channel input cards and one 4-channel output card.\u003c\/p\u003e","brand":"Ashly Audio","offers":[{"title":"Default Title","offer_id":52450693152952,"sku":"135926","price":3629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/ne24.24mt16x8_eb73bfeb-d8a0-4aa0-91d9-f8ae5a926987.jpg?v=1784669359"},{"product_id":"ashly-ne24-24mt-4x4","title":"Ashly ne24.24mt (4x4) Protea Dsp Audio Matrix Processor 4-In X 4-Out","description":"\u003cp\u003eThe ne24.24M uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. Prot?a ne24.24M's base unit offers a 4-input\/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output 4 channels of DSP processing at a time. Matrixing allows you to route any input to any output and control individual levels once they have been assigned.\u003c\/p\u003e","brand":"Ashly Audio","offers":[{"title":"Default Title","offer_id":52450693316792,"sku":"135933","price":1799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/ne24.24mt4x4.jpg?v=1784671316"},{"product_id":"ashly-ne24-24mt-8x12","title":"Ashly ne24.24mt (8x12) Protea Dsp Audio Matrix Processor 8-In X 12-Out","description":"\u003cp\u003eControl and protect your installed sound system with the Ashly Protea NE24.24MT, a network-enabled DSP speaker processor that offers easy setup and control using standard 10\/100 Ethernet protocol and Protea ne software. The ne24.24m has four analog inputs and four analog outputs as standard. Use the four option bays to provide additional I\/O and functionality. This model includes one 4-channel input card and two 4-channel output cards. The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I\/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.\u003c\/p\u003e","brand":"Ashly Audio","offers":[{"title":"Default Title","offer_id":52450693382328,"sku":"135937","price":3149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/ne24.24mt8x12.jpg?v=1784669359"},{"product_id":"ashly-audio-ne24-24mt-8x16-120v-u","title":"Ashly ne24.24mt (8x16) Audio ne24.24MT Protea Matrix Digital Signal Processor with 8x16 I\/O","description":"\u003cp\u003eThe Ashly Protea ne24.24MT is a network-enabled DSP audio matrix processor offering easy setup and control via standard 10\/100 Ethernet and Protea ne software, with no special outboard control units required.\u003c\/p\u003e\u003cp\u003eThis 8-input x 16-output configuration uses modular expansion cards to deliver up to 24 channels of audio matrixing and processing, with individual DSP per card and flexible routing of any input to any output.\u003c\/p\u003e","brand":"Ashly Audio","offers":[{"title":"Default Title","offer_id":52450693415096,"sku":"135939","price":3599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/ne24.24mt8x16.jpg?v=1784669360"},{"product_id":"ashly-ne24-24mt-8x4","title":"Ashly ne24.24mt (8x4) Protea Dsp Audio Matrix Processor 8-In X 4-Out","description":"\u003cp\u003eThe ne24.24M uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. Prot?a ne24.24M's base unit offers a 4-input\/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output 4 channels of DSP processing at a time. Matrixing allows you to route any input to any output and control individual levels once they have been assigned.\u003c\/p\u003e","brand":"Ashly Audio","offers":[{"title":"Default Title","offer_id":52450693447864,"sku":"135940","price":2249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/ne24.24mt8x4.jpg?v=1784671317"},{"product_id":"martinaud-dx0-6","title":"Martin Audio DX0.6 2x6 Dsp loudspeaker processor","description":"\u003cp\u003eThe DX0.6 is the ideal processing tool to partner the ADORN, CDD and BlacklineX ranges or indeed any system where comprehensive system control and protection is required perhaps where there may be budget constraints.\u003c\/p\u003e","brand":"Focusrite (Martin Audio Products)","offers":[{"title":"Default Title","offer_id":52450747744440,"sku":"139344","price":1200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/TMP-DX0.6_14423ded-d609-48a1-9d6f-827b354638a2.jpg?v=1785874709"},{"product_id":"alfatron-electronics-alf-dsp1616-u","title":"Alfatron 16x16 Audio Digital Signal Processor 16 In\/Out DSP Unit | Without Dante","description":"\u003cp\u003eThe Alfatron Electronics 16x16 Audio Digital Signal Processor is designed for systems integrators and installed AV professionals who need a fully featured, multi-channel DSP without the complexity of a full mixing console. Powered by an ADI SHARC 21489 processor, the unit delivers 16 balanced mic\/line inputs and 16 balanced line outputs with 24-bit, 48kHz conversion, giving installers the headroom and resolution required for conference rooms, houses of worship, courtrooms, lecture halls, and multi-zone commercial audio systems.\u003c\/p\u003e\u003cp\u003eWhere this processor stands out in its class is the breadth of onboard processing. AEC, auto-mixing, noise suppression, feedback suppression, parametric and graphic EQ, compression, expansion, ducking, gating, ambient noise compensation, and delay are all available without requiring external plug-ins or additional hardware. A single USB audio channel adds soft-codec integration for hybrid meeting spaces. Control flexibility covers RS-232, RS-485, and IP, supporting both direct PC configuration via the included GUI and third-party control system integration. Eight GPIO connections enable custom external logic triggers for room automation scenarios.\u003c\/p\u003e\u003cp\u003eThe family is available with or without Dante network audio, letting integrators match the unit to the infrastructure already in place. External volume controls and keypads can be added separately for end-user room control without exposing the full DSP interface.\u003c\/p\u003e","brand":"Alfatron Electronics, Inc.","offers":[{"title":"Without Dante","offer_id":52450968600760,"sku":"147031","price":2899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/147031_Alfatron-Electronics-16x16-Audio-Digital-Signal-Processor-16-In_Out-DSP-Unit-Without-Dante_ALT01sqr.jpg?v=1788969569"},{"product_id":"alfatron-electronics-alf-dsp1616-ud","title":"Alfatron 16x16 Audio Digital Signal Processor 16 In\/Out DSP Unit | With Dante","description":"\u003cp\u003eThe Alfatron Electronics 16x16 Audio Digital Signal Processor is designed for systems integrators and installed AV professionals who need a fully featured, multi-channel DSP without the complexity of a full mixing console. Powered by an ADI SHARC 21489 processor, the unit delivers 16 balanced mic\/line inputs and 16 balanced line outputs with 24-bit, 48kHz conversion, giving installers the headroom and resolution required for conference rooms, houses of worship, courtrooms, lecture halls, and multi-zone commercial audio systems.\u003c\/p\u003e\u003cp\u003eWhere this processor stands out in its class is the breadth of onboard processing. AEC, auto-mixing, noise suppression, feedback suppression, parametric and graphic EQ, compression, expansion, ducking, gating, ambient noise compensation, and delay are all available without requiring external plug-ins or additional hardware. A single USB audio channel adds soft-codec integration for hybrid meeting spaces. Control flexibility covers RS-232, RS-485, and IP, supporting both direct PC configuration via the included GUI and third-party control system integration. Eight GPIO connections enable custom external logic triggers for room automation scenarios.\u003c\/p\u003e\u003cp\u003eThe family is available with or without Dante network audio, letting integrators match the unit to the infrastructure already in place. External volume controls and keypads can be added separately for end-user room control without exposing the full DSP interface.\u003c\/p\u003e","brand":"Alfatron Electronics, Inc.","offers":[{"title":"With Dante","offer_id":52450968666296,"sku":"147032","price":4699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/147032_Alfatron-Electronics-16x16-Audio-Digital-Signal-Processor-16-In_Out-DSP-Unit-With-Dante_ALT01sqr.jpg?v=1788969636"},{"product_id":"yam-dme5-signal-processor","title":"Yamaha DME5 Speaker Signal Processor","description":"\u003cp\u003eThe Yamaha DME5 is a speaker processor built for commercial installation environments that need scalable system design, centralized control, and reliable loudspeaker management. Positioned within Yamaha’s Commercial Installation Solutions Ecosystem, it provides open-architecture processing for tailored system configuration rather than fixed-format deployment. This makes it a strong fit for integrators building distributed audio systems in hospitality, corporate, education, and performance-support spaces.\u003c\/p\u003e\u003cp\u003eFor networked audio workflows, the DME5 includes 16x16 Dante connectivity, along with analog inputs, analog outputs, and flexible I\/O capacity that can be allocated as needed within the platform. Its 96 kHz processing support helps it align with high-quality Yamaha system designs, while the unified DME platform simplifies expansion across projects of different sizes. Software integration through ProVisionaire Design supports system configuration, and ProVisionaire Control PLUS enables remote control and monitoring across connected devices.\u003c\/p\u003e\u003cp\u003eThe result is a processor suited to installations where loudspeaker optimization, device coordination, and long-term operational control matter more than mixing functions. With low input-to-output latency, onboard memory for parameter sets and snapshots, and comprehensive connectivity for control and audio networking, the DME5 is designed to serve as a central processing element in modern installed sound systems.\u003c\/p\u003e","brand":"Yamaha Corporation of America","offers":[{"title":"Default Title","offer_id":53364271874232,"sku":"205032","price":4499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/205032_Yamaha-DME5-Speaker-Signal-Processor_ALT1sqr.jpg?v=1777048059"},{"product_id":"yam-dme3-signal-processor","title":"Yamaha DME3 Speaker Signal Processor","description":"\u003cp\u003eThe Yamaha DME3 is a speaker processor built for commercial and installed audio systems that need scalable processing, networked audio, and centralized system control. Positioned within Yamaha’s Commercial Installation Solutions Ecosystem, it uses an open-architecture approach that supports tailored system design while maintaining a consistent workflow across the DME series. With 96 kHz processing support and Dante networking, the DME3 fits projects where sound quality, device coordination, and predictable deployment matter.\u003c\/p\u003e\u003cp\u003eFor integrators and system designers, the DME3 supports streamlined configuration through Yamaha ProVisionaire Design software and broader system control through ProVisionaire Control PLUS. The Conductor function strengthens coordination with compatible Yamaha devices, making it easier to configure processing and control as part of a unified solution. This makes the DME3 especially relevant for conferencing spaces, hospitality venues, education facilities, and other installations where audio routing and loudspeaker management must work reliably within a wider AV system.\u003c\/p\u003e\u003cp\u003eThe hardware format is practical for rack integration, with 1U dimensions, front-to-rear variable-speed fan cooling, USB Type-C connectivity, and a combination of analog, flexible I\/O, Dante, network, and GPI connections. Low input-to-output latency, broad parameter memory, and support for multiple sample rates give designers useful headroom when building systems that require repeatable presets, snapshots, and remote management.\u003c\/p\u003e","brand":"Yamaha Corporation of America","offers":[{"title":"Default Title","offer_id":53364272300216,"sku":"205031","price":2999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/205031_Yamaha-DME3-Speaker-Signal-Processor_ALT6sqr.jpg?v=1777048090"},{"product_id":"atlasied-atmosphere-audio-processor-parent","title":"AtlasIED Atmosphere Audio Processor","description":"\u003cp\u003eThe AtlasIED AZM4 is the central processor of the Atmosphere audio control ecosystem, designed for commercial integrators managing multi-zone audio in restaurants, retail environments, houses of worship, schools, and corporate facilities. Unlike simple DSP crossovers, the AZM4 combines processing power with automated system intelligence — handling ambient noise compensation, loud noise detection, room combining, and scheduled paging from a single rackmount unit.\u003c\/p\u003e\u003cp\u003eIntegrators working with third-party control systems will find native module support for RTI, Crestron, Extron, and AMX, reducing programming overhead and ensuring reliable interoperability. Up to 16 plug-and-play wall plate accessories and sensors connect across two dedicated accessory ports, each rated to 1,000 feet, giving installers flexible topology without added infrastructure cost.\u003c\/p\u003e\u003cp\u003eSystem setup and ongoing management are handled through a Progressive Web App interface accessible via Ethernet or the unit's onboard Wi-Fi access point — no proprietary software installation required. The device-agnostic interface supports tablets and laptops directly on-site, making commissioning and adjustments straightforward for both initial install and service visits. A large library of AtlasIED speaker presets further reduces tuning time in the field.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"4-Zone","offer_id":51443505692856,"sku":"60514","price":1558.99,"currency_code":"USD","in_stock":true},{"title":"8-Zone","offer_id":51443427606712,"sku":"57781","price":2306.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/60514_AtlasIED-AZM4-ATMOSPHERE-4-Zone-Audio-Processor.jpg?v=1768241010"},{"product_id":"atlasied-bluebridge-networkable-dsp-device-parent","title":"AtlasIED BlueBridge Networkable DSP Device","description":"\u003cp\u003eThe AtlasIED BlueBridge family is purpose-built for AV integrators who need a scalable, networkable DSP platform across demanding installed environments — from house of worship and courtrooms to conference rooms, multi-zone restaurants, and campus paging systems. Each unit auto-recognizes on the network during setup, making commissioning straightforward without requiring a dedicated control network in applications where TCP\/IP control is not needed after deployment.\u003c\/p\u003e\u003cp\u003eWhere BlueBridge separates itself from competing DSP platforms is its 40-bit floating point processing engine, which eliminates digital clipping even under complex algorithm loads, and its THAT Corp microphone preamps paired with 24-bit converters — yielding an ultra-low noise floor suited to speech intelligibility-critical spaces. The open architecture drag-and-drop software environment gives system designers full control without proprietary programming lock-in, and the BluePanel interface lets integrators build end-user control screens accessible via networked computers or programmed wall controllers like the BB-TOUCH7 touch panel.\u003c\/p\u003e\u003cp\u003eThe processing module library covers the full range of installed audio signal management needs: gain-sharing and gating auto-mixers for multi-mic conferencing, parametric and graphic EQ, anti-feedback, Butterworth, Linkwitz-Riley, and Bessel crossovers with slopes from 6 to 48dB per octave, dynamics processing including compression, limiting, and ducking, plus signal generators for system verification. Pre-configured design templates from AtlasIED's BlueBridge training program provide certified integrators with validated starting points for common deployment types, reducing design time on repeat project categories.\u003c\/p\u003e","brand":"Atlas Sound, L.P. - Mitek","offers":[{"title":"Without Dante \/ 16 Input x 16 Output","offer_id":52445640655032,"sku":"13861","price":5767.99,"currency_code":"USD","in_stock":true},{"title":"With Dante Support \/ 16 Input x 16 Output","offer_id":52446199742648,"sku":"44849","price":6554.99,"currency_code":"USD","in_stock":true},{"title":"Without Dante \/ 16 Input x 8 Output","offer_id":52445640851640,"sku":"13863","price":5179.99,"currency_code":"USD","in_stock":true},{"title":"With Dante Support and Acoustic Echo Cancellation \/ 16 Input x 8 Output","offer_id":52445640982712,"sku":"13864","price":7209.99,"currency_code":"USD","in_stock":true},{"title":"With Dante Support \/ 16 Input x 8 Output","offer_id":52445641212088,"sku":"13865","price":5964.99,"currency_code":"USD","in_stock":true},{"title":"Without Dante \/ 8 Input x 16 Output","offer_id":52445641408696,"sku":"13866","price":4852.99,"currency_code":"USD","in_stock":true},{"title":"With Dante Support \/ 8 Input x 16 Output","offer_id":52445641867448,"sku":"13867","price":5637.99,"currency_code":"USD","in_stock":true},{"title":"With Dante \/ 8 Input x 8 Output","offer_id":51438526890168,"sku":"13869","price":4591.99,"currency_code":"USD","in_stock":true},{"title":"Without Dante \/ 8 Input x 8 Output","offer_id":51438526824632,"sku":"13868","price":3804.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/13861_ATLAS-BB-1616_ALT01.jpg?v=1783370721"},{"product_id":"alfatron-electronics-16x16-audio-digital-signal-processor-parent","title":"Alfatron Electronics 16x16 Audio Digital Signal Processor","description":"\u003cp\u003eThe Alfatron Electronics 16x16 Audio Digital Signal Processor is designed for systems integrators and installed AV professionals who need a fully featured, multi-channel DSP without the complexity of a full mixing console. Powered by an ADI SHARC 21489 processor, the unit delivers 16 balanced mic\/line inputs and 16 balanced line outputs with 24-bit, 48kHz conversion, giving installers the headroom and resolution required for conference rooms, houses of worship, courtrooms, lecture halls, and multi-zone commercial audio systems.\u003c\/p\u003e\u003cp\u003eWhere this processor stands out in its class is the breadth of onboard processing. AEC, auto-mixing, noise suppression, feedback suppression, parametric and graphic EQ, compression, expansion, ducking, gating, ambient noise compensation, and delay are all available without requiring external plug-ins or additional hardware. A single USB audio channel adds soft-codec integration for hybrid meeting spaces. Control flexibility covers RS-232, RS-485, and IP, supporting both direct PC configuration via the included GUI and third-party control system integration. Eight GPIO connections enable custom external logic triggers for room automation scenarios.\u003c\/p\u003e\u003cp\u003eThe family is available with or without Dante network audio, letting integrators match the unit to the infrastructure already in place. External volume controls and keypads can be added separately for end-user room control without exposing the full DSP interface.\u003c\/p\u003e","brand":"Alfatron Electronics, Inc.","offers":[{"title":"Without Dante","offer_id":52450968600760,"sku":"147031","price":2899.99,"currency_code":"USD","in_stock":true},{"title":"With Dante","offer_id":52450968666296,"sku":"147032","price":4699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0871\/7382\/4696\/files\/147031_Alfatron-Electronics-16x16-Audio-Digital-Signal-Processor-16-In_Out-DSP-Unit-Without-Dante_ALT01sqr.jpg?v=1788969569"}],"url":"https:\/\/soundpro.com\/collections\/speaker-processors-1.oembed","provider":"SoundPro","version":"1.0","type":"link"}