Doug Fleenor Design Entry Station Two DMX Snapshot Recorder is a standalone DMX snapshot recorder that can store two preset scenes or “looks.” It can be used as a stand-alone main station or configured as a remote station in conjunction with another ES2 configured as a main station. It can be used as a remote station with Doug Fleenor Design’s Preset 10-A, Preset 10-A2, or Rerun stations.
In remote mode, the ES2 has two buttons which can be assigned to remotely trigger any of the presets/shows on a master station. There is also a recessed button which is used to record presets and to set fade times when the ES2 is configured as a main station.
Doug Fleenor Design Entry Station Two Features
- Available in black (pictured) and white (not pictured)
- A companion to a master Preset Ten, Rerun-A, or another ES2 station
- Simplified entry station with two user-assignable buttons
- Buttons can be associated with any preset on the main station
- Presets are recalled by pressing one of the buttons
- Integrated as a remote station in systems with a main station and power supply
- Solid aluminum faceplate designed to install over a standard single gang electrical box
- Connections to the Entry Station Two are power (2 wires) and DMX512 (3 wires)
- Power can be supplied from a variety of sources, including a 10V class 2 "doorbell" transformer
- Can function as a main station
- Both presets can be recorded from lighting levels produced by any DMX512 source
- Doug Fleenor Design Entry Station Two DMX Snapshot Recorder1
- Connector
- Phoenix Contact MSTB series 5 position two part terminal block
- Model: MSTB 2,5/5-ST-5,08 Order Number: 17 57 04 8
- Connector pin out
- 1 (C) DMX512 common
- 2 ( -) DMX512 data -
- 3 (+) DMX512 data +
- 4 (C) Supply common (internally tied to pin1)
- 5 (V) Supply voltage “hot”
- Input/Output circuit ESD protected EIA-485 transceiver (LT1785)
- Indicators
- Two green preset indicators
- One bi-color indicator (Red = Lockout, Yellow = Time, Green = Inactive)
- User controlsTwo push buttons
- Option jumpersSet button association and select main/remote
- Power input
- 9 to 15 volts AC or DC / 200mA per station
- (A 10 volt class 2 “doorbell” transformer is recommended for fixed installations)
- ColorBlack anodized with optional laser engraving
- Size
- Faceplate (HxDxW): 4.5x0.2x2.75"
- Faceplate: rear inset (HxDxW): 4.15x0.1x2.4"
- Electrical box minimum inside dimensions (HxDxW): 3.5x1.25x2.1"
