The MP-A80V from QSC is an 8-Channel 200W 70/100V Power Amplifier. Part of the MP-A Power Amplifier series, the MP-A80V is ideal for permanent installations in applications such as business music and paging systems.
More about QSC’s MP-A Power Amplifiers
The MP-A series of music and paging amplifier family builds on the QSC legacy for dependability and quality while offering enhanced flexibility and efficiency for business music and paging applications.
A primary feature of MP-A models is their FlexAmp Technology. FlexAmp streamlines system design, allowing a single high channel count amplifier to do the work that would otherwise require multiple amps at different power levels to achieve the same result. Simply configure each pair of channels (e.g. 1-2, or 3-4, etc.) to deliver up to 400 W combined output power, in any mix. Set up the amp to work simultaneously with ceiling loudspeakers in separate rooms—while meeting different power requirements for both. An output mode switch offering settings for 4 Ω, 8 Ω, 70 V, and 100 V enhances this feature of flexibility.
MP-A models boast efficient class-D output circuitry and switchmode power supplies. Standby mode automatically engages when the sound system is not in use for 28 minutes, while an auto-ramp circuitry allows the system to power up quickly and quietly when signals start up again. This energy-saving design allows for efficient performance and lowers operational costs.
Additional features of MP-A amps include an 80 Hz highpass filter on each output, a remote input for putting the amplifier into standby mode (ideal for fire safety systems), and an amplifier status signal on the remote output for system verification. Packed into a 1RU chassis, each model is easy to incorporate into cramped installation spaces.
QSC MP-A80V Features
- FlexAmp Technology allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio
- Class-D output circuitry and switchmode power supply for high efficiency and low cost of ownership
- 1RU amplifier design for rack space savings
- Load selector for driving 4Ω, 8Ω, 70 V or 100 V on each channel
- Selectable 80 Hz highpass filter offered on each channel
- Power saving features - Auto-standby (after 28 minutes with seamless auto-ramp when signal returns) and remote standby input
- Amp status remote output
- Rock-solid QSC amplifier dependability
- MP-A80V 8-Channel 200W 70/100V Power Amplifier1
- IEC cable1
- Quick start guide1
- Connector pack1
- Channels8
- Power (all channels driven)
- 8Ω: 200W
- 4Ω: 200W
- 70V: 200W
- 100V: 200W
- FlexAmp TechnologyAllows each pair of amplifier channels to deliver up to 400 W total power, in any ratio
- Frequency response at 8Ω20 Hz – 20 kHz +/- 0.5 dB
- Signal to Noise> 103 dB
- Input sensitivity1.23V (+4 dBu)
- Gain at 8Ω30.0 dB
- Output circuitryClass D
- Input impedance>10k, balanced or unbalanced
- Maximum input level12.3V (+24 dBu)
- Cooling
- Type: Forced air cooling, thermally regulated fan speed, side/rear-to-front airflow
- Operating temperature range: Maximum: -10° - 50°C, recommended: 0° - 35°C, reduced performance above 40°C
- Connectors
- Input connectors: Eight 3.5mm Euro, 3-pin (green)
- Remote connectors: One 3.5mm Euro, 5-pin (black)
- Output connectors: Four 5.0mm Euro, 4-pin (green)
- Front panel indicatorsPower, signal (per channel), limit / mute / protect (per channel)
- Rear panel indicatorsBi-Color LED signal / limit/ mute/ protect
- User-configurable operating modes (per channel)DIP switch selectable, low impedance 4Ω or 8Ω, high impedance direct drive 70V or 100V
- Remote I/ORemote standby, amplifier status enunciation on 3.5 mm connectors
- Highpass filter80 Hz DIP switch engaged per channel
- Dimensions1.75x19x14.8" (44x483x377 mm)
- Net Weight12.8 lbs (5.8 kg)
- Shipping Weight17.4 lbs (7.9 kg)
- Power RequirementsUniversal power supply (with active power factor correction), 100 – 240 VAC, 50 -60 Hz
- Agency approvalsUL, CE, RoHS/WEEE compliant, FCC class B (conducted and radiated emissions)
