Skip to main content
DPA ST4006C Stereo Pair with Case
DPA ST4006C Omni Condenser Microphones (Stereo Pair)
$5,030.00

DPA ST4006C Omni Condenser Microphones (Stereo Pair)

SoundPro Item: 65316
MPN: ST4006C
$5,030.00
Add to Wish List

Account manager
Contact an Account Manager for your personalized price

Whenever a small, lightweight, inconspicuous microphone for top-quality recording is required, a d:dicate 4006C Microphone is the right choice. They come as a hand-matched pair that offers the truest capture of stereo sound available.

Even though the standard tolerances on the d:dicate™ microphones are extremely low, a stereo match is even closer. These specially selected d:dicate 4006C microphones are matched within ±0.5 dB on both frequency response and sensitivity.

The pair comes in a heavy-duty Peli Case for safe transportation and easy access to the microphones and accessories.

DPA ST4006C Features

  • Carefully matched microphones
  • Natural sound
  • High sensitivity
  • Low noise-floor
  • Extremely linear frequency
  • Sturdy Peli Case for transportation and protection
  • 4006C omnidirectional microphones2
  • Free-field grids2
  • Close-miking grids2
  • Diffuse-field grids2
  • Windscreens2
  • Clips2
  • Carrying case1
  • Transducer TypeCondenser
  • Polar PatternOmnidirectional
  • Frequency Response10 Hz - 20 kHz
  • Rated Output Impedance100 ohms
  • Sensitivity, Nominal ±2 dB at 250 Hz40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent Noise Level, A-Weightedtyp. 15 dB(A) re. 20 µPa (max. 17 dB(A))
  • Equivalent Noise Level, ITU-R BS.468-4typ. 27 dB (max. 29 dB)
  • Distortion, THD < 1%131 dB SPL RMS, 134 dB SPL peak
  • Dynamic Rangetyp. 119 dB
  • Max. SPL, THD 10%139 dB SPL peak
  • Cable Drive Capability100 m (328 ft)
  • Output Balance PrincipleImpedance balancing with Active Drive
  • CMRR> 50 dB
  • Power Supply (for full performance)P48 (Phantom Power)
  • Current consumption2.8 mA
  • ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Colormatte black
  • Weight2.2 oz
  • Dimensions0.75" diameter x 2.5" length
  • Max. Output Voltage, RMS4.5 V
  • Matching Tolerance (frequency response and sensitivity)±0.5 dB
  • Phase Deviation for Kit< 5%

In The Box

Customer Reviews