The 112.HTH provides highly intelligible vocals, extended low-frequency response and high output capability from a reasonably-sized direct weather capable system. The 112.HTH can be used anywhere outdoors thanks to its combination of 316 marine stainless steel suspension hardware and enclosure reinforcements, HYBRID stainless steel grille with marine capable coating and tough UV-resistant enclosure. The 112.HTH comes with a large-sized, rotatable 60 x 40-degree horn installed, but a rotatable 105 x 60-degree for wide coverage applications is also available with order. The 112.HTH can be powered as a low impedance system (800 watts continuous, 3,200 watts peak at 8 ohms) or as a high impedance system (70.7 – 100 volts with taps at 150 watts, 75 watts and 37.5 watts). The 112.HTH delivers top-class performance, impressive flexibility and long useful life. Its highly defined audio performance and output capability make it a solution for indoor or outdoor audio applications.
One Systems 112.HTH Features
- Marine-grade (316) stainless steel rigging and structural support
- Easily configurable Hi Z (150W) multi tap or Lo Z (8 ohm) operation
- Combined 70.7Vrms or 100Vrms operation
- Rotatable High frequency horns
- ET-60/40 horn supplied and ET-105/60 horn available
- No performance degrading or dynamics limiting passive protection devices
- 800W continuous, 3200W peak power handling in Lo Z mode
- IEC 529 IP 45 ingress protection (IP 56 when vent plugs are installed)
- 112.HTH Platinum Hybrid Series Speaker1
- Frequency Response60Hz – 16,000Hz
- Coverage Pattern
- ET-60/40, 60 x 40 degrees
- ET-105/60, 105x60 degrees
- Crossover Frequency
- 1800 Hz (60x40 horn)
- 1300 Hz (105 x 60 horn
- System Sensitivity (1W/1m)96dB
- Power Handling
- 800W continuous
- 1600W program
- 3200W peak
- Input Impedance (Lo Z)8-ohms
- Input Taps (Hi Z)150W, 75W, 37.5W
- Weight77.8 lbs (35.3kg)
- Dimensions (HxWxD)29.5x14.5x15.7" (748x368x398.3mm)
