The PAN08 is a multifunctional device. Each of the four channels can be used independently as an active DI box, line isolation box or booster. The combination socket input accepts unbalanced and balanced signals. The output has dual transformer balanced XLR jacks (front and rear).
The signal level can be attenuated by 20 dB for microphone inputs, but can also be boosted in three stages by up to 18 dB for LINE inputs if necessary. With an output level of +12 dBu on a load of 600 Ohms with 0.05 % THD / 40 Hz and an output noise level of less than -110 dBu, the unit meets even high professional standards. One special feature that is worthy of mention is battery power. The supply voltage may range from 9 to 18 V. Thus the PAN08 can also be used without mains power outdoors.
Palmer PAN 08 Features
- Multifunctional device
- Four channels
- Use each channel independently as an active DI box, line isolation box, or booster
- Combination socket input accepts unbalanced and balanced signals.
- Output has dual transformer balanced XLR jacks (front and rear)
- Signal level can be attenuated by 20 dB for microphone inputs
- Can also be boosted in three stages by up to 18 dB for LINE inputs
- Output level of +12 dBu on a load of 600 Ohms with 0.05 % THD / 40 Hz and an output noise level of less than -110 dBu
- Supply voltage ranges from 9 to 18V
- PAN 08 19" 4-Channel Active DI / Line Isolation Box1
- Type active
- Channels 4
- Inputs 4
- Input connectors 6.3 mm jack, XLR
- Max. input level +12dBu
- Input impedance
- Balanced: 20k Ohm(s)
- Outputs 8
- THRU outputs/channel 0
- Output connectors XLR
- Max. output level +12dBu
- Output impedance 600 Ohm(s)
- Frequency response 20-20000Hz
- Transformer balanced Yes
- Ratio Variabel
- Indicators Power
- Controls 2 x gain, attenuator, ground lift
- Operating voltage 9V DC power supply
- Cabinet material sheet steel
- Cabinet surface Powder coated
- Width 480 mm (19")
- Depth 90 mm
- Height 45 mm (1U)
- Weight 1.59 kg
