The SEVENTY 2-Channel Performance Serato DJ Mixer from RANE is a solid steel, precision performance battle mixer. Built like a tank from high-quality components, SEVENTY delivers the tools to meet the highest demands of professional DJs.
Experience the ultimate control over your mix. SEVENTY boasts an intuitive, easy-to-use layout that frees you up to focus on the battle at hand, not the gear at your fingertips. Add individuality to your performance with sixteen Akai Professional MPC pads with independent control per deck, choosing from Hot Cue, Pitch ‘n Time, Saved Loops, Sampler, Scratch Bank, Roll, and Transport control depending on the atmosphere you’re trying to sculpt.
Rane SEVENTY Features
- Switch between dual USB inputs, Phono, Line and Auux
- Dual microphone inputs with tone control
- (6) instant access internal FLEX FX and stackable Serato DJ Pro FX control
- (16) Akai Professional MPC pads with independent mode controls per deck
- Serato sampler volume control
- (3) brand new MAG FOUR contactless faders
- 3-band isolator EQ and dedicated high/low pass filter per channel
- Serato Playlist Navigation and control
- Session in/out for battle teams or aux in/record out
- Dedicated loop controls
- Toggle Instant Doubles or Sync On/Off Mode
- Built like a tank for non-stop, heavy duty use
- External crossfader tension adjust controls
- Mic 1 Echo FX depth control
- Level and tone control for mic 2 input
- Steel protective roll bars act as handles for quick transport
- Contour controls for crossfader and deck faders
- Cross fader and deck fader reverse
- Dual 3.5mm and 1/4" headphone inputs
- Headphone split cue switch
- Dual laptop USB inputs
- IEC power input, on/off power switch
- Balanced XLR master output
- Balanced 1/4" jack booth output
- RCA stereo session in/out
- Deck 1 and Deck 2 Aux, Phono/CD inputs
- USB inputs for Twelve or controller
- Phono ground terminals
- Mic 1 and 2 dual XLR/Jack inputs, switchable to Mic/Line
- SEVENTY 2-channel performance Serato DJ mixer1
- Digital Audio
- Converters: AKM High Definition Audio; 24-bit PCM, 48 kHz
- Digital Signal Processing: 32-bit, floating point, double precision
- Dynamic Range (A-weighted, unity gain)
- ADC: 114dB
- DAC: 114dB
- CD Input to Analog Output: 114dB
- CD Input to USB Output: 114dB
- USB Input to Analog Output: 114dB
- Inputs
- Microphone 1/2 (Combo XLR/1/4" [6.35 mm] TRS, Mic/Line switchable)
- Analog Gain: 30 dB (Mic), 4.75 dB (Line)
- Max. Input: 0.126 Vrms (Mic), 2.3 Vrms (Line)
- Gain Trim: Off to +20 dB (unity at center)
- Aux Inputs 1/2 (RCA stereo pairs)
- Max. Input: 4 Vrms
- Dynamic Range (A-weighted): 114dB
- CD/Phono Inputs 1/2 (RCA stereo pairs, switchable)
- CD: line
- Max. Input: 4Vrms
- Dynamic Range (A-weighted): 114dB
- Phono: RIAA
- RIAA Curve: +0.1/-0.2 dB
- Gain (@1kHz): 30dB
- Max. Input (@1kHz): 126 mV
- Session Input (RCA stereo pair)
- Max. Input: 4Vrms
- Dynamic Range (A-weighted): 114dB
- Outputs
- Main Outputs (XLR)
- Frequency Response: 20 Hz to 20 kHz (± 0.2 dB)
- Max. Output: 8 Vrms
- THD+N (@ 1 kHz, 4 Vrms): 0.002%
- Booth Outputs (1/4"/6.35 mm TRS)
- Frequency Response: 20 Hz to 20 kHz (± 0.2 dB)
- Max. Output: 8 Vrms
- THD+N (@ 1 kHz, 4 Vrms): 0.002%
- Session Outputs (RCA stereo pair)
- Frequency Response: 20 Hz to 20 kHz (± 0.2 dB)
- Max. Output: 4 Vrms
- THD+N (@ 1 kHz, 2 Vrms): 0.002%
- Headphone Outputs (1/4"/6.35 mm and 1/8"/3.5 mm TRS)
- Max. Output Voltage: 4 V (no load)
- THD+N (@ 1 kHz, 2 Vrms): 0.003%
- Output Power: 96mW (50 ohms)
- Controls: on/off muting
- Display1.6" OLED (diagonal)
- Pads(16) velocity-sensitive multi-color back-lit pads (8 per deck, 10 modes each)
- Faders(3) MAG FOUR tension-adjustable faders (2 channel/line faders, 1 crossfader)
- Connectors
- (2) XLR outputs (Main)
- (2) 1/4” (6.35 mm) TRS outputs (Booth)
- (4) RCA stereo input pairs (Deck 1–2)
- (2) XLR / 1/4” (6.35 mm) TRS inputs (Mic 1–2)
- (1) RCA stereo input pair (Session)
- (1) RCA stereo output pair (Session)
- (1) 1/4” (6.35 mm) TRS output (Headphones)
- (1) 1/8” (3.5 mm) TRS output (Headphones)
- (2) USB Type-A ports (Deck 1–2 USB Controllers)
- (2) USB Type-B ports
- (1) IEC power cable input
- Power
- Connection: IEC
- Voltage: 100–240 V, 50/60 Hz
- Consumption: 30W
- Dimensions (WxDxH)11.2x17.5x4.13"
- Weight12.3 lbs
More about the Rane SEVENTY
Incorporate effects with the push of a button with SEVENTY’s radio-style FX controls that offer instant access to six Flex FX as well as Serato’s software FX. Dedicated loop sections and Instant Double buttons are laid out for quick, effortless access. The Rane SEVENTY 2-Channel Performance Serato DJ Mixer also provides built-in Serato DJ Pro and Serato DVS software to further streamline your mix and deliver all the tools you need to make your sound unique.
The SEVENTY boasts three MAG FOUR Contactless Tension Adjustable Faders. The MAG FOUR design is Rane's lightest, smoothest fader ever, made for faster, smoother, and more precise cuts. Take control with its integrated Patented Magnetic position-sensing technology with an additional HAL sensor. This contactless, user-customizable tension adjusts to your desired feel while maintaining pristine accuracy.
Built for high durability and performance, the MAG FOUR features an ultra-wide fader TANG, improved PCB circuitry, advanced carrier material, and custom-sculpted fader caps. Dual high-polished mirror finish rods equip the fader for smooth performance. MAG FOUR faders are 50% lighter than their predecessors for tighter, faster cuts on the crossfader and upfaders. Additionally, using SEVENTY’s external tension-adjust control for its crossfader, customize your mixer loose or tight depending on your playing style and desired artistic result.
