The 3.6SP (3-in x 6-out) and 4.8SP (4-in x 8-out) are a great choice for both live sound and use in fixed installations like worship facilities, schools and performance spaces. The SP Series has front panel controls for immediate access to the settings during a dynamic, live performance. The front and rear panel USB ports allow you to program the DSP via Ashly's Protea software and set a password-secured security system to prevent unauthorized tampering.
Use the full Protea DSP suite crossover, equalization, compressor/limiter and delay. With up to 682ms on the input and the output, the SP-series can serve as a front-end processor for delay stacks. The three inputs on the 3.6SP give you added flexibility, particularly when most other processors only offer two inputs.
Ashly 3.6SP Features
- Very intuitive, easy-to-use Front Panel Parameter Control
- Single rack space with XLR audio connections
- Crossover, EQ, delay and limiter functions
- Inputs assignable to any output
- Front panel or PC programming and control with 4 levels of security
- USB and RS-232 interface; 6′ USB-A to USB-B cable included
- Third-party control friendly
- Balanced inputs and outputs
- Parametric filters and comp/limiter controls feedback
- Linkwitz-Riley, Bessel and Butterworth filters
- 12, 18, 24 and 48dB/octave slopes
- Parametric EQ: 1/64th to 4-octave range
- 682ms input and output delay (1,364ms total)
- Limiter on each output
- Individual input and output metering
- Safety/Compliance: CE,FCC, RoHS
- 3.6SP 3/6 System Processor1
- InputActive Balanced, 18k Ohms
- Input Level+20dBu (Max)
- Input Gain Range -40dB–+12dB
- OutputActive Balanced, 112 Ohms
- Output Level+20dBu (Max)
- Output Gain Range-40dB–+12dB
- Weights, Dimensions & Power
- Unit Weigh:t SP3.6: 7lbs (9.54kg) SP4.8: 7.3lbs (3.3kg)
- Shipping Weight: SP3.6 / SP4.8: 10lbs (5kg)
- Environmental: 40°F–120°F (4°C–49°C) noncondensing
- Dimensions: 19” L x 1.75” H x 8.5” D (483mm x 89mm x 216mm)
- AC Requirements: Universal Power Supply, 100–240VAC, 50/60Hz, 20W
- Equalizer
- EQ Filter Types: 1st or 2nd Order High or Low Shelf, Parametric
- Shelving Filter Boost/Cut Range: ±15dB
- Shelving Filter Frequency Range
- Low Shelf: 19.7Hz–2kHz
- High Shelf: 3.8kHz–21.9kHz
- Parametric Filter Boost/Cut Range: +15dB/-30dB
- Parametric Filter Frequency Range: 19.7Hz–21.9kHz, 1/24 Octave Steps
- Parametric Filter Bandwidth: Four Octaves to 1/64 Octave
- Input/Output Delay0–682ms
- Crossover
- HPF/LPF Frequency: Range 19.7Hz―21.9kHz, Off
- Available Filter Types
- 12dB/Oct Butterworth
- 12dB/Oct Bessel
- 12dB/Oct Linkwitz-Riley
- 18dB/Oct Bessel
- 18dB/Oct Linkwitz-Riley
- 24dB/Oct Butterworth
- 24dB/Oct Bessel
- 24dB/Oct Linkwitz-Riley
- 48dB/Oct Butterworth
- 48dB/Oct Bessel
- 48dB/Oct Linkwitz-Riley
- Limiter
- Threshold Range: -20dBu–+20dBu
- Ratio Range: 1.2:1 to ∞:1
- Attack Time Range: 0.5ms–50ms
- Release Time Range: 10ms–1Sec
- Frequency Response: 20Hz–20kHz, ±0.25dB
- THD: <0.01% @ 1kHz, +20dBu
- Dynamic Range: >110dB, 20Hz–20kHz unweighted
- Audio Sampling Rate: 48kHz
- Propagation Delay: 1.46ms
- Signal LEDs (dBu or VU)
- Inputs: -20/Mute, -10, 0, +10, Clip
- Outputs: -20/Mute, -10, 0, Limit Threshold, Clip
