Ashly's MX-406 stereo mic/line mixer is a professional, studio quality solution to everday mixing needs. MX-406 features include six channels of mic or line inputs with mic input pad, TRS insert points, and +48V phantom power. Each channel has up to 60dB input gain, separate treble and bass controls, an aux send control, level, and a stereo pan control. A stereo line input is provided for a stereo program source such as tape, CD, or MP3 player. Outputs include aux master, stereo line out (pre-master), stereo left and right, transformer balanced mono out, and stereo headphones. A full 11 segment LED array indicates stereo output level.
Stereo main outputs use 1/4" jacks, stereo line input and line out use RCA connectors, and there is an additional 3.5mm jack on the front panel for stereo line in. A transformer isolated 600 ohm mono output uses an XLR connector. Ashly mixers still use professional quality 16mm metal shaft potentiometers for greater accuracy and long life and of course, Ashly products come with a worry-free five year warranty.
Ashly MX-406 Mixer Features
- Six Balanced 1/4” - XLR Inputs
- Low-Noise Mic Preamp Circuitry
- High Gain (92dB Channel Input to Program Output) Ensures Full Output with Low Level or Distant Mics
- Two-Band EQ on Each Input
- Input Level and Pan Controls on Each Input
- Clip LED’s on Each Input
- Eleven-Step LED Output Level Metering
- 48V Phantom Power for Condenser Mics
- Six Channel Inserts
- Aux Send Controls
- Balanced 1/4” Stereo Outputs
- Transformer Balanced XLR Mono Output
- Stereo Headphone Jack with Level Control
- Auxiliary Line Inputs and Outputs
- Three Position Input Gain Switch
- 20dB Microphone Pad Switch
- Stereo Line Input Control
- Front Panel 3.5mm Stereo Line Input
- Aux Master Output Control
- Internal Power Supply
- Safety/Compliance: cTUVus/CE, RoHS, FCC
- MX-406 6-Input Mic/Line Mixer1
- DISTORTION
- THD at +4dBu output, 20Hz-20KHz: <0.05%
- THD at +12dBu output, 30Hz-10KHz: <0.05%
- IMD (SMPTE) at +12dBu output: <0.05%
- HUM & NOISE (20Hz-20KHz at max preamp gain)
- equivalent input hum and noise: <-128dBu
- residual output noise all levels at minimum: <-100dBu
- master levels at nominal all channel levels at minimum: <-90dBu
- aux master at nominal all channel aux at minimum: <-90dBu
- master levels and one channel level at nominal: <-68dBu
- MAXIMUM VOLTAGE GAIN (±2dB)
- MASTER
- Mic/Line Input to Master Outputs: +84dB
- Mic/Line Input to Mono Output, 600 ohm load: +84dB
- AUX SENDS
- Mic Input to Aux Master Output, pre ch. level: 84dB
- Mic Input to Aux Master Output, post ch. level: 97dB
- Stereo Line In to Master Output: 27dB
- MASTER
- FREQUENCY RESPONSE20Hz-20KHz: +0.5/-1.0dB
- EQUALIZATION
- Bass: ±12dB at 70Hz, shelving
- Treble: ±12dB at 8KHz, shelving
- CROSSTALKadjacent inputs, 20Hz-20KHz: <-65dB
- VU METERS
- Stereo outputs: -21 to +6 VU
- 0VU = +4dBu
- PEAK INDICATORSPeak Clip indicator on each input channel and left and right outputs, illuminates 3dB below clipping
- PHANTOM POWER+48 VDC applied to all Mic Inputs, switchable on rear panel. Maximum total current draw = 80mA. Maximum single channel current draw = 14mA. Gradual power-up and down to eliminate "pops".
- SHIPPING WEIGHT13 lbs. (5.9kg)
- POWER REQUIREMENTS100-240 VAC, 50-60 Hz, 30 watt
- DIMENSIONS19x3.5x9.4" (483x89x239mm)
- NOTES*unless otherwise stated, specification conditions are: 150Ω source, maximum preamp gain, all other controls set at nominal, XLR output into 600Ω or greater.
