Ashly RD-8C Remote Fader Level Control

RD-8C is a hard-wired desktop programmable remote fader controller for Ashly amps and processors that have DSP and a serial data connector.

More about Ashly's Remote Controls

The RD-8C and RW-8C are remote level controllers which can be used with the VCM-88C, Protea 24.24M, and
certain future Ashly products. The RD-8C is a desktop controller, while the RW-8C is electronically the same but mounts as a wall plate using a standard 4-gang electrical box. There are eight channels and a master, each with a level control and an on/off button.

The Remote Disabled LED indicates when the RD/RW-8C has been disabled from the VCM-88C front panel switch. Note: LED will illuminate when the VCM-88C Remote Disable switch is pushed in, and communication will be inhibited

Ashly RD-8C Features

• Visual indication verifies changes
• Input & matrix mix gain control
• Output gain control
• Channel mute
• Zone source select
• Logic high/low
• Serial data = 4-wire cable

• Ashly RD-8C Remote Fader Level Control1

• Fader Range +10dB to -75dB
• ConnectionsXLR Male
• Max Data Cable Length
  • With VCM-88C: up to 1000 ft using #24 gauge twisted pair
  • With 24.24M: up to 1000 ft using #24 gauge twisted pair
• Power Requirementsphantom powered
• Shipping Weight3 lbs (1.4kg)
• Dimensions (LxHxD)7.3x3.4x1.6”(185x87x41mm)
• Environmental40-120 deg. F (4-49 deg, C), noncondensing