Ashly TM-360 60W Compact Mixer Amplifier

The TM Series of compact tabletop mixer/amplifiers are the products of choice in small restaurants, retail stores, bistros, convenience stores and mini-marts and school classrooms.

The TM-360 is a 3-Input 60 Watt mixer/amplifier that offers input and output flexibility coupled with energy efficiency. Each can be used as a desktop unit or conveniently rack-mounted and tucked away.

Automatically switch into a stand-by mode if no audio input is received for 25 minutes, thus reducing the current draw. The TM-360 uses a Class D amplifier topology for added energy efficiency. Input options include selectable mic or line level, telephone and dual RCA sum-to-mono.

More about Ashly's TM Series

The TM Series of compact tabletop mixer/amplifiers are the products of choice in small restaurants, retail stores, bistros, convenience stores and mini-marts and school classrooms.

Ashly enters the commercial sound electronics segment honoring the commitment of providing quality audio products to this growing marketplace. The TM-360 is a 3-Input 60 Watt mixer/amplifier that offers input and output flexibility coupled with energy efficiency. Each can be used as a desktop unit or conveniently rack-mounted and tucked away.

The TM-360 uses a Class-D amplifier topology for added energy efficiency. Input options include selectable mic or line level, telephone and dual RCA sum-to-mono. Automatically switch into a stand-by mode if no audio input is received for 25 minutes, thus reducing the current draw.

The TM-335 is a 3-input 35 Watt mixer/amplifier. Like the TM-360, it features your choice of mic, line, dual RCA sum-to-mono or telephone inputs. Rear panel dip-switches set input priorities and trigger the ducking circuit.

Ashly TM-335 Features

• One balanced mic/line/tel input with phantom power, 2 balanced line level inputs w/stereo RCA sum-to-mono inputs
• Mute priority of inputs
• Mini-jack input on front panel disables channel 2-input
• Switches for zone 2 assign, mute priority, low-cut filter, phantom power
• 600 Ohm pre-out for external amplifiers
• Zone 2-output, 1W / 8 Ohms
• Power saving standby mode: audio inactivity or contact closure
• Safety/Compliance: CSA, CE, FCC, RoHS
• Optional rack kit available

• TM-360 60W Compact Mixer Amplifier1

• TM Model
  • Channels: 3
  • Signal-to-Noise (26dB Gain): 80dB
  • Max Output Power
    • 4 Ohms 60W
    • 8 Ohms 30W
  • Constant Voltage Power: 1%THD
    • 25V: 60W
    • 70V: 60W
  • Line Current Draw: @120VAC 60HZ (Divide values by 2 for 230VAC)
    • Standby Mode: 0.15A
    • Idle: 0.24A
    • Typical (1/8 power pink noise): 0.38A
    • Max (1/3 power sine wave): 0.66A
  • Thermal Dissipation: BTU/hr
    • Standby Mode: 26
    • Idle: 43
    • Typical (1/8 power pink noise): 53
    • Max (1/3 power sine wave): 75
• Operating Temp40˚F~120˚F (4˚~49˚C), noncondensing
• Dimensions (WxHxD)11.8x2x9.02” (300x51x230mm)
• Unit Weight 6.7lbs (3.04kg)
• Shipping Weight 9lbs (4kg)
• Power Requirements (Supplied AC mains transformer depends on country requirements)
  • 120VAC, 60Hz, 24W (USA & Canada)
  • 230VAC, 50/60Hz, 24W (EC)
• Total Harmonic Distortion60W (@ 1kHz) < 1%
• Frequency Response: 1W @ 1kHzMInput 1, 2, 3: +1/-3dB, 80Hz–15kHz
• Tone Control
  • Bass (100Hz): +10dB
  • Treble (10kHz): +10dB
• Input Sensitivity
  • Input 1: -10dBV to -50dBV
  • Input 2, 3: 0dBV to -20dBV
• Signal-to-Noise Ratio: 60W @ 1kHz, A-weightedInput 1, 2, 3: >80dB
• Residual Noise: Input 1-3 Volume Min, Tone Set @ Center
  • Master Volume (Min): -72dB
  • Master Volume (Max): -57dB
• Zone 2 Output
  • Rated Power (8 Ohm): 1W (3% THD)
  • Balanced (600 Ohm): 2.4V
• Mix Configuration Switches
  • SW1: Zone 2 Assign Input 1
  • SW2: Zone 2 Assign Input 2
  • SW3: Zone 2 Assign Input 3
  • SW4: VOX Trigger Input 1
  • SW5: VOX Trigger Input 2
  • SW6: Mute Link Input 2 & 3
  • SW7: Low Cut, 400Hz 6dB/Oct.
  • SW8: Ch1 Phantom Power, +18V
• Contact Closure
  • Manual Mute: Pins 1 & G = Input 1 Mute Trigger
  • Master System Standby: Pins G + 2 Power Standby