The AtlasIED IPX Series IP-to-analog gateways are perfect for connecting your unified communication platform to off network analog third party systems, including, but not limited to, sending notifications to analog overhead paging, trigger or be triggered by access-control systems, assist to fire alarm, and two-way audio support for video-surveillance, simply plug and play. The IP-ZCM2RMK includes two IP-ZCM zone controllers and a rack mount kit designed to mount both units in a standard width rack.
AtlasIED IP-ZCM2RMK registers as a communication endpoint directly within InformaCast, and SA-Announce Advanced Notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, & scheduled announcements, while leveraging the WAN/LAN Network Architecture.
When used within a Cisco Environment, these same IP speakers from AtlasIED can join Cisco's Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco's SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).
AtlasIED IP-ZCM2RMK Features
- Dynamic or Static IP Address
- IEEE802.3 10/100Base-T Ethernet
- IEEE 802.1q Tagging
- IEEE 802.11AT Compliant
- VoIP Standard Audio: G.711 u-law/a-law (64 kbit/s) or G.722 Wideband Audio (64 kbit/s)
- Auto Provisioning: DHCP Option 66, 150, or TFTP Server or DHCP Option 72 for HTTP Server
- Auto Registration: SLP for InformaCast or DHCP Option 72 for Revolution or GCK
- Static Configuration: HTTP GUI for Static Configuration or Cisco SRST
- Integrated Amplifier 15-Watt Total Power: Primary Speaker Output 8 ohm
- Aux Audio Line-In Unbalanced (2.8Vpp 10K)
- Aux Audio Line-Out Unbalanced (2.8Vpp 10K)
- 2 General Purpose Inputs
- 1 General Purpose Output (2A @ 30 VDC)
- Phone/Night Loud Ringer
- External Power Supply Option
- IP-ZCM2RMK Dual POE+ IP Addressable Gateways1
- Rack Mount Kit1
- Power Rating 15 Watts MAX into an 8Ω Load
- Inputs RJ-45 Female on PCB
- Outputs 8Ω, 25V, or 70.7V
- Power Source IEEE 802.3af or IEEE 802.3at Compliant POE(+) Network Switches / Local 24VDC PSU
- Network Control Multicast Enabled Networks
- Rack Units 1RU
- Dimensions (H x W x D) 1.75 x 19 x 8.85 inches (45 x 482.6 x 224.8 mm)
- Safety Listed 62368-1, CSA C22.2 #62368-1, IEC 62368-1 CB Scheme and FCC
