The Attero Tech Synapse D16Mio is a high-performance networked audio interface supporting Dante™ with AES67 interoperability. The D16Mio features 16 channels of studio grade microphone preamplifers, with up to 51 dB of digitally controlled gain in 3 dB steps. Each microphone input also supports +48 V switchable phantom power and a switchable pad for accommodation of professional line level inputs. The balanced line level outputs feature digitally controlled output attenuation from 0 to -100 dB.
Attero Tech Synapse D16Mio Features
- 16 studio-grade mic preamps with line level capability
- Front panel or network control of mic preamp gain, phantom power, mic/line input sensitivity
- 16 line level balanced outputs with front panel or network level control
- Q-SYS Extension allows for drag-and-drop integration into your Q-SYS design
- Synapse D16Mio Dante/AES67 networked audio interface1
- AC mains power cord1
- Mic/Line Inputs (16 Channels)
- Max. Input Level: -43 dBu (max mic gain), +24 dBu (pad active – line mode)
- Input Type: 3-pin depluggable terminal block
- Analog Outputs (16 Channels)
- Max. Output Level: +24dBu
- Input Type: 3.8mm terminal blocks
- Dynamic Range: >110 dB
- Headphone Output
- Connector: 1/4" TRS jack
- Load: 32 Ω minimum
- Audio Networking
- Protocol Support: Dante™ with AES67 support
- Channel Count: 16 Dante RX, 16 Dante TX
- Ports: 2 - Gb Copper on RJ-45, 2 - Gb SFP
- Sample Rates: 16/24-bit, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Weight6 pounds
- Dimensions
- 1 RU form factor
- HxWxD: 1.75" x 19" x 12.5"