Attero Tech’s unD6IO multi-IO Dante network audio wallplate features XLR, RCA, and 3.5 mm IN with one 3.5 mm and two balanced OUTs in a dual-gang form factor. The unD6IO is PoE enabled, delivering all connectivity (power, control and audio data) with a single CAT-5e/6 cable. The size and I/O density of the unD6IO make it easy to put Dante connectivity wherever it is needed - near the audio source or sink - thereby eliminating costly and interference-prone analog wiring.
Attero Tech unD6IO Features
- 2 x balanced XLR mic/line inputs, 2 x RCA and 1 x 3.5 mm input
- 1 x 3.5 mm output and 2x balanced outputs on a side-mounted depluggable connector, with software-controllable volume
- Q-SYS Extension allows for drag-and-drop integration into your Q-SYS design
- PoE capable
- Three software-selectable gain levels are available on the XLR input to accommodate a wide variety of input levels and devices.
- +48 V phantom power
- Dante Domain Manager-ready
- unD6IO 4x2 Dante Networked Audio Wall Plate1
- PowerPoE (802.3af)
- Dimensions (HxWxD)
- 4.2x3.5x2" (114.3x88.9x50.8 mm)
- Decora wall plate (2-gang): 4.87x4.94x0.08" (123.7x125.48x2.03 mm)
- Weight0.6 lb (.27 kg)
- Audio Inputs
- Input types
- 2 x XLR (balanced and RF filtered)
- 2 x RCA (stereo unbalanced)
- 1 x 3.5 mm (stereo unbalanced)
- Gain: -18 dB, -3 dB, +25 dB and +40 dB, software selectable (Inputs 1/2)
- Maximum input levels
- +20 dBu @ -18 dB gain, +6 dBu @ - 3 dB gain, -23 dBu @ +25 dB gain
- -38 dBu @ +40 dB gain (Inputs 1/2)
- +12 dBu ( Inputs 3/4 A & B)
- Phantom power: +48 V (inputs 1 & 2 only)
- Input types
- Audio Outputs
- Output type Two balanced line level with automatic muting on loss of Dante signal on 6-pin Depluggable Euroblock (Outputs 1/2 B) Two unbalanced line level outputs on stereo 3.5 mm TRS (Outputs 1/2 A) Attenuation range -60 dB to 0 dB (software-controlled) Maximum output levels +12 dBu at 0 dB attenuation (output 1/2 A) +20 dBu at 0 dB attenuation (output 1/2 B)
- Dante Network
- Physical level: Standard Ethernet
- Connector: Single RJ-45
- Cable type: CAT-5e or higher
- Supported sample rates: 44.1 kHz, 48 kHz
