Audio-Technica PRO35 Clip-On Condenser Instrument Microphone

Designed for sax, toms, brass, and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included AT8418 UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Audio-Technica PRO35 Features

• UniMount® clip permits accurate positioning, provides shock resistance and protects element
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Extended frequency response captures subtle nuances of the performance
• 6' (1.8 m) cable permanently attached to microphone

• PRO35 Clip-On Cardioid Condenser Instrument Microphone1
• AT8538 power module1
• AT8418 UniMount® clip1
• M12 Soft protective pouch1
• Two Year Limited End User Warranty1

• Transducer TypeCondenser
• Polar PatternCardioid
• Frequency Response50 Hz - 15 kHz
• Impedance250 ohms
• Sensitivity-45 dBV/Pa (5.6 mV)
• Low Frequency Roll Off 80 Hz, 18 dB/octave
• Maximum Input Sound Level 145 dB SPL, 1 kHz at 1% T.H.D.
• Dynamic Range 115 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio 64 dB, 1 kHz at 1 Pa
• Phantom Power Requirements 11-52V DC, 2 mA typical
• Switches Flat, roll-off
• Cable 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
• Output Connector (Power Module) Integral 3-pin XLRM-type
• Dimensions
  • Power Module: 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter
  • Microphone: 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter
• Weight
  • Microphone: 0.3 oz (8 g)
  • Power Module: 2.9 oz (81 g)