Audix MG Condenser Gooseneck Microphone

The MG Series condenser gooseneck microphone system's sophisticated dual preamp circuitry is internally balanced, ensuring the audio path will be isolated from hum and noise. In addition, this circuitry provides protection from RF interference and spurious emissions from cell phones and wireless GSM devices.

The MG12, MG15, and MG18 are professional miniature gooseneck condenser microphones known for being easy to use while accurately capturing and reproducing vocals from a comfortable distance, making them ideal for speaking and teleconferencing applications.

The MG condenser microphones are designed with a uniformly controlled cardioid polar pattern, helping to isolate the speaker from ambient noise. These models are also available in a hypercardioid polar pattern. With a wide frequency range of 60 Hz – 19 kHz, the MG provides natural sound with an exceptional vocal response.

The goosenecks may be mounted with the supplied flange mount (TM1218) or with an optional base with an internal shockmount (SMT1218R). The mics may also be used on a standard mic stand or in conjunction with the Audix ATS10 table stand with lighted on-off switch, ATS1 table stand with programmable switch and ATS1L with remote logic capability. Manufactured to very high standards and tight tolerances, the MG12/15/18 features a machined brass body, field replaceable capsule, replaceable electronics, and a variety of optional accessories. The MG12/15/18 operate on phantom power of 18 - 52 Volts and are available in non-reflective black matte finish.

The MG Condenser Microphone is great for:

• Pulpit, podium
• Board meetings
• Video Teleconferencing
• Courtroom

Audix MG Features

• Available in 12, 15, or 18 inch lengths
• Natural accurate sound
• Modular threaded capsule(s)
• Low noise electronics, dual circuitry, internally balanced
• RF Immunity
• Low profile design
• Tension fit design for stable positioning

• MG Miniature Gooseneck Condenser Microphone1
• TM1218 Flange Table Mount1
• WS1218 External Windscreen1

• Transducer TypeCondenser
• Polar PatternsCardioid / Hypercardioid (MG12HC, MG15HC & MG18HC)
• Frequency Response60 Hz - 19 kHz
• Output Impedance150 Ohms balanced
• Sensitivity38 mV (C) / Pa @ 1k 32 mV (HC) / Pa @ 1k
• Equivalent Noise Level22 dB (A weighted)
• Signal to Noise Ratio72 dB
• Maximum SPL=130 dB
• Dynamic Range108 dB
• Power Requirements18 – 52 Volts phantom
• Materials / FinishMachined Brass / Black Finish
• Weight118 g / 4.16 ounces (MG12) 126 g / 4.44 ounces (MG15) 134 g / 4.73 ounces (MG18)
• Length415 mm / 16.3 inches (MG12) 480 mm / 18.9 inches (MG15) 570 mm / 22.4 inches (MG18)