With the R42 Kit, a variety of combination packs can be tailored to a specific application depending on what type of transmitter and mics are needed.
It includes a two-channel diversity receiver with antennas, power supply, rack mount, and BNC cables for front mounting antennas. With the addition of the ADS48 antenna distribution system, a total of four R42 systems (8 channels of wireless) will fit compactly into just 5 rack spaces and run off of one set of antennas.
Available Frequency Bands
- A = 522 MHz – 554 MHz
- B = 554 MHz – 586 MHz
Audix R42 KIT Features
- 32 MHz Wide spectrum receiver
- 106 Pre-coordinated frequencies for quick, easy, and reliable set up
- One-touch auto scan searches for clear channel
- One-touch sync links transmitter to the receiver via infrared beam
- R42 32 MHz Diversity Receiver1
- BNC Cables2
- Antennas2
- Audio Cable1
- Power Supply1
- User Guide1
- Rackmount Hardware1
- Frequency Range A: 522 MHz - 554 MHz / B: 554 MHz - 586 MHz
- Bandwidth 32 MHz
- Compatible Systems Up to 16 systems (R41) / 8 systems (R42) simultaneous use
- Switchable Frequencies 106 Pre-coordinated frequencies
- Frequency Response 45 Hz – 18 kHz
- Compander System 2:1
- Pilot Tone 32 kHz
- Receiving System Single tuner, antenna diversity
- Signal-to-Noise Ratio 105 dB at 30 kHz deviation (A-weighted)
- Total Harmonic Distortion ≤0.7% (33 kHz deviation at 1 kHz)
- Sensitivity 5 dBμV (S/N 60 dB at 25 kHz deviation, A-weighted)
- Audio Output (Level=6)
- Balanced: -12 dbv @ 25 kHz deviation, 600 ohm load
- 1/4": -18 dbv @ 25 kHz deviation, 10 ohm load
- Output Connectors 1/4", XLR
- Audio Level Adjustment -12 to +9 in 3 db steps
- Range 300' (91 m)
- Power Supply 100 - 240 V / 50 - 60 Hz, 12 V DC, 1A
- Dimensions (WxDxH)15.98x8.23x1.73" (406x209x44mm)
- Net Weight4.75 lbs (2.1kg)
