Aviom AN-16/i v.2 16-Channel Line-Level Input Module

The AN-16/i v.2 Input Module connects 16 balanced line-level inputs from a mixing console's direct outputs, insert points, and more to a personal mixing system. When used alone, one AN-16/i v.2 can generate a single 16-channel A-Net signal.

The A-Net In on the AN-16/i v.2 allows multiple Pro16 input devices (including console cards, AN-16/i-M, and the original AN-16/i) to be connected together to generate the higher channel count Pro16e™ version of A-Net used by the A360 Personal Mixer and A320 Personal Mixer.

Aviom AN-16/i v.2 Features

• Sixteen balanced audio inputs (¼-in TRS connectors)
• Sixteen balanced Thru connectors (TRS)
• A-Net In with four-position slot range selector switch
• Stereo Link switches for each channel pair
• Four-position gain switches (+22, +4, 0, -10dB)
• Signal present and clip LEDs per channel

• Aviom AN-16/i v.2 Input Module1

• Audio Inputs16, balanced line-level, 1/4-inch TRS connector
• InputsTip: Audio +; Ring: Audio -; Sleeve: Ground
• TRS ThruImpedance matched output
• Analog to Digital Conversion48kHz sample rate, 24 bit
• Frequency Response4Hz-22kHz
• A- Net In
  • One Category 5 (RJ45 connector)
  • Four-position slot range selector switch for use with Pro16e A-Net
• A-Net Out
  • One Category 5 (RJ45 connector)
  • Gain Settings Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu
• Channel LED IndicatorsSignal Present and Clip, per channel
• Line InputsImpedance: 48k ohms
• MeteringLEDs; green: Signal Present, red: Clip; per channel
• Stereo Operation
  • Stereo Link, per channel pair;
  • Two-position switch (Normal, Link)
• Maximum Input Level+22dBu
• Input Impedance17.8k ohm
• Freq. Response4Hz-22kHz +0.2dB/-3dB
• THD +N< 0.003%
• Crosstalk-90dB
• Bit Error Rate (BER)10(-12)
• Signal to Noise (unweighted)
  • 90dB typical, A/D to D/A
  • Measured from AN-16/i to AN-16/o Output Module
• Digital OutputsA-Net: 1; RJ45 connector
• Pro16e A-Net Use unshielded Cat-5e UTP (or better) cable
• Latency <0.880 msec (measured from analog input to analog output)
• Power Supply
  • Input Voltage: External, DC, universal switching type
  • Output Voltage: 100-240 volts, 50/60Hz, 30VA
  • Plug Size: 18-24 VDC, 0.5 amp
  • 2 mm
• Power18-24 VDC, 500mA
• Dimensions19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
• Weight6.8 lb (3.08 kg)