Aviom BOOM-1 Tactile Transducer Processor

BOOM-1 is designed to dramatically enhance a performer's personal mixing experience by adding powerful, optimally-processed low-frequency tactile information to any in-ear or headphone monitor mix.

Now you can feel your monitor mix, too. Designed by the personal monitor experts, the BOOM System is easy to use and provides a natural low-frequency extension to your monitoring environment. The BOOM System products are compatible with all Aviom personal mixing systems and can easily be connected to any audio device that can provide a headphone or line-level output.

Aviom BOOM-1 Features

• ¼-inch TRS Stereo Headphone In and Thru
• Strength control with Signal and Clip LED indicators
• Three selectable Feel presets control multiple DSP settings for user-preferred Tight to Loose feel
• Transducer Mute with LED (easily compare your mix with and without the tactile transducer engaged)
• Seamless integration with any personal mixing system
• Locking Transducer Out
• Custom tailor the response of the BOOM-1 to a variety of tactile transducers with the DSP Profile settings
• XLR mono input for direct connection to the A360 Personal Mixer
• XLR mono out provides the DSP processed signal for connection to an external power amplifier for driving large tactile transducer arrays

• BOOM-1 Tactile Transducer Processor1

• Headphone In (front & rear)
  • 1/4-inch TRS stereo;
  • Tip: Audio Left; Ring: Audio Right; Sleeve: Ground
• Headphone Thru (front & rear)
  • 1/4-inch TRS stereo;
  • Tip: Audio Left; Ring: Audio Right; Sleeve: Ground
• Line In
  • XLR female,
  • Pin 2: Hot, Pin 3: Cold; Pin 1: Ground
• Maximum Input Level15.98 dBV
• Input Impedance9.5k Ohm
• Line Out XLR balanced; mono; with Volume control
• Maximum Output Level 12.55 dBV
• Output Impedance 33.2 Ohms
• Amplifier Output
  • 4 Ohms - 210W
  • 8 Ohms - 117W
• Transducer Output2-conductor locking speaker connector
• Power SupplyInternal, universal switching type, IEC connector; 100-240 volts AC, 50/60Hz
• Fuse250VAC~ T3AL
• Dimensions19" (482.6 mm) wide x 8.62" (219.07 mm) deep; 2U, 3.5" (88.9 mm) high
• Weight6 lbs (2.72 kg)