Aviom D800 A-Net Distributor

The D800 A-Net Distributor provides the link between the input module or console card and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utilizing standard Cat-5e cables.

This unit also integrates additional advanced options for delivering high-channel-count audio streams to your Personal Mixers, streamlining connections between A360s and transmitters for wireless in-ear monitors, and integrating the A360 Display iOS app. The D800 can be used with A-16II, A320, and A360 Personal Mixers in any combination.

Aviom D800 A-Net Distributor Features

• Distributes power and audio to up to eight A360, A320, A-16II, and A-16R Personal Mixers
• One Pro16e A-Net In supports A-Net Bridge input from up to four synchronous Pro16 A-Net streams
• Network Mix Back for streamlined connections to wireless IEM transmitters
• Ethernet support for iOS devices over Wi-Fi
• One Pro16e A-Net Out for thru connections
• Heavy-duty locking connectors for all audio connections

• D800 A-Net Distributor1

• A-Net to/from Personal Mixers (front panel)
  • Eight locking RJ45 connectors, powered
  • Compatible with A-16II, A320, and A360 Personal Mixers
  • 2-position switch (I/II) accommodates A-16II and A320 (I) and the bidirectional A360 Personal Mixer (II)
• A-Net In or A-Net Bridge InAccepts Pro16 or Pro16e A-Net; one locking RJ45 connector
• A-Net Out (rear panel)
  • Pro16e A-Net; one locking RJ45 connector, unpowered
  • Supports system expansion and the A-16II, A320, and A360 Personal Mixers
• A-Net Mixes Out
  • Pro16e A-Net
  • One locking RJ45 connector, unpowered
  • Provides up to 16 channels (8 stereo pairs) of Network Mix Back™ data from up to eight A360 Personal Mixers
• Ethernet
  • One RJ45 connector
  • for iOS A360 Display support
• LEDsPower On (red); Sync (green)
• USBUsed for firmware updates
• A-Net Cables
  • Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.
  • Unshielded Cat-5e cable may be used on all rear panel connections
• Output Voltage for Personal Mixers
  • 24VDC, 0.5 amp
  • Transmitted over the Cat-5e cable
• Power SupplyInternal, universal switching type, IEC connector
• Input Voltage
  • 100-240VAC, 50-60Hz, 300W
  • Fuse - 250VAC~ T4AL
• Dimensions19" (482.6 mm) wide x 14.25" (362 mm) deep; 2U, 3.5" (88.9 mm) high
• Weight12 lbs (5.44 kg)
• Dante Specifications
  • Dante Primary I/O Locking RJ45 connector
  • Dante Secondary I/O Locking RJ45 connector
  • Stereo Link Four DIP Switch blocks: 1-16, 17-32, 33-48, and 49-64; used to set up to 32 channel pairs as stereo links
  • Stereo Link Defeat Bypasses DIP switch stereo link settings
  • Disable DIP switch Chooses Dante (down) or A-Net In (up) as the input source for the D800-Dante
  • ID1, ID2 DIP Switch Reserved
  • A, B, C, D DIP switch Reserved
  • LEDs (rear panel)
    • Error (red)
    • Sync (green)
    • 1GB Active (red)
    • Network Activity (green)
  • Supported Dante Sample Rates
    • 44.1, 48kHz - 64 channels
    • 88.2, 96kHz - 32 channels
    • 176.4, 192kHz - 16 channels
  • Static IP support: Yes
  • AES67 Support: Yes