The D800-Dante A-Net Distributor from Aviom provides the link between the input module or console card and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utilizing standard Cat-5e cables.
This unit also integrates additional advanced options for delivering high-channel-count audio streams to your Personal Mixers, streamlining connections between A360s and transmitters for wireless in-ear monitors, and integrating the A360 Display iOS app. The D800-Dante can be used with A-16II, A320, and A360 Personal Mixers in any combination.
Aviom D800 Features
- Distributes power and audio to up to eight A360, A320, A-16II, and A-16R Personal Mixers
- One Pro16e A-Net In supports A-Net Bridge input from up to four synchronous Pro16 A-Net streams
- Network Mix Back for streamlined connections to wireless IEM transmitters
- Ethernet support for iOS devices over Wi-Fi
- One Pro16e A-Net Out for thru connections
- Heavy-duty locking connectors for all audio connections
- Direct connectivity to a Dante™ audio network
- Support for up to 64 Dante network channels
- D800-Dante A-Net Distributor1
- Documentation1
- A-Net to/from Personal Mixers (front panel)
- Eight locking RJ45 connectors, powered
- Compatible with A-16II, A320, and A360 Personal Mixers
- 2-position switch (I/II) accommodates A-16II and A320 (I) and the bidirectional A360 Personal Mixer (II)
- A-Net In or A-Net Bridge InAccepts Pro16 or Pro16e A-Net; one locking RJ45 connector
- A-Net Out (rear panel)
- Pro16e A-Net; one locking RJ45 connector, unpowered
- Supports system expansion and the A-16II, A320, and A360 Personal Mixers
- A-Net Mixes Out
- Pro16e A-Net
- One locking RJ45 connector, unpowered
- Provides up to 16 channels (8 stereo pairs) of Network Mix Back™ data from up to eight
- A360 Personal Mixers
- Ethernet One RJ45 connector
- for iOS A360 Display support
- LEDs
- Power On (red)
- Sync (green)
- USBUsed for firmware updates
- A-Net Cables
- Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits
- Unshielded Cat-5e cable may be used on all rear panel connections
- Output Voltage for Personal Mixers
- 24VDC, 0.5 amp
- Transmitted over the Cat-5e cable
- Power SupplyInternal, universal switching type, IEC connector
- Input Voltage
- 100-240VAC, 50-60Hz, 300W
- Fuse - 250VAC~ T4AL
- Dimensions 19 inches (482.6 mm) wide x 14.25 inches (362 mm) deep; 2U, 3.5 inches (88.9 mm) high
- Weight12 lbs (5.44 kg)