A powered, portable bass module, the Sub1 subwoofer combines with virtually any portable PA and delivers low-end performance down to 40 Hz. Its unique 7” × 13” high-excursion RaceTrack driver allows for an ultra-slim enclosure, delivering performance that rivals traditional round drivers without the cumbersome size, freeing up room in your vehicle and on the stage. Compared to the Sub2 subwoofer, Sub1 is the more compact subwoofer option for the Bose L1 Pro32 system, combining seamlessly via single-cable SubMatch connectivity. You can stack multiple Sub1 subwoofers for even more low end — or to unleash Cardioid Mode for directional bass. With a Sub1, you get a subwoofer that goes virtually anywhere and effortlessly fills out your sound.
Bose Sub1 Features
- Add powerful bass to your portable PA system
- Go from vehicle to venue easily with a slim design
- 7” × 13” high-excursion RaceTrack driver
- Stack multiple Sub1 subwoofers
- Cardioid Mode
- Combine seamlessly with Bose L1 Pro32 portable line array via proprietary SubMatch connectivity
- Pair with other powered loudspeakers
- Sub1 powered bass module1
- Power cord1
- Cover1
- Frequency Response (-3 dB)40 Hz to 180 Hz
- Frequency Range (-10 dB)32 Hz to 250 Hz
- Max SPL @ 1m118.6 dB (continuous), 124.6 dB (peak)
- Crossover200 Hz
- Transducers
- Low Frequency: 1 x RaceTrack low-frequency driver 7" x 13"
- Low Frequency Voice Coil: 2"
- Driver Protection: dynamic limiting
- Amplification
- Type: Class D
- Low Frequency Amplifier Channel: 480W
- Cooling: convection cooling
- Onboard Mixer
- Channels: 2
- Channel 1 and 2 Inputs
- Audio Type: combination XLR or 1/4" TRS connector (mic/instrument/line)
- Impedance: 100 KΩ
- Channel Gain: +10 dB to +45 dB; from input to driver, controlled by volume control
- Max Input Signal: +24 dBu
- Channel 1 & 2 Output Audio Type: XLR connector, line-level, full-frequency bandwidth
- SubMatch Input Audio Type: Bose proprietary multi-pin cable
- SubMatch Thruput Audio Type: Bose proprietary multi-pin cable
- AC Power
- AC Power Input: 100-240 VAC (±20%, 50/60 Hz)
- Input Electrical Type: IEC, SubMatch
- Initial turn on inrush current: 14.9A at 120V; 29.3A at 230V
- Inrush current after AC mains interruption of 5 s: 5.8A at 120V; 32A at 230V
- Physical Specifications
- Enclosure Material: high-impact polypropylene, birch plywood
- Grille Material: powder-coated perforated steel
- Dimensions (HxWxD): 21" x 10.2" x 20.8"
- Weight: 34.1 pounds (15.5 kg)
