The versatile CR-X500 4K PTZ Camera is a successor to Canon’s well-established BU-47H HD PTZ camera. Targeted to bring outstanding image quality at 4K resolution for outdoor use by broadcasters, cable networks, sports stadiums and for weather and traffic monitoring, Canon’s CR-X500 4K PTZ camera is IP-55 rated for dust and water resistance and is equipped with powerful features and functions.
The CR-X500 PTZ produces incredible 4K image quality with the combination of a 1” CMOS sensor, Dual DIGIC DV 6 image processors and 15x Optical 4K UHD Zoom lens. These core components provide the image-processing power and speed that enables 4K UHD video at up to 60P over 12G-SDI and precise focus with Dual Pixel CMOS AF.
Canon CR-X500 Features
- 1" CMOS Sensor with Dual Pixel Autofocus
- High Quality 4K 60p Video Output
- 15x Optical Zoom Lens (30x FHD) with Optical Image Stabilization
- Renowned Canon Color Science with Support for Wide DR and Canon Log 3 Image Modes
- Outdoor Camera with Wiper (IP55 Rated)
- 12G-SDI Video Out
- CR-X500 Outdoor 4K 15x PTZ Camera1
- Waterproof Tube1
- Control Connector1
- Ferrite Core3
- Printed Documents
- Camera
- Color: White
- Operating Condition: Outdoor
- Image Sensor
- Type 1.0 (1.0 in.) single-plate CMOS sensor
- Total pixels: approx. 13.40 megapixels
- Effective pixels: approx. 8.29 megapixels (3840 x 2160)
- Lens
- f=8.3 – 124.5 mm, F/2.8 – 4.5, 15x optical zoom, 9-bladed iris diaphragm
- 35mm equivalent focal length: approx. 25.5 (W) – 382.5 mm (T)
- Zoom
- Optical: 15x
- Advanced Zoom FHD: 30x
- Lens Configuration: 18 elements in 14 groups (including 2 aspheric elements)
- Image Stabilizer: Optical-shift
- Shutter Speed: Auto, Manual 1/3 – 1/1000 sec.
- Iris: Auto, Manual
- Gain: Auto, Manual 0 db ～ 33.0 dB
- ND Filter: Built-in (Off, 1/4, 1/16, 1/64), motor operated
- Color Sampling: 4:2:2, 10-bit
- White Balance: AUTO (AWB), Set
- Focus: Dual Pixel CMOS AF
- Gamma: Normal1: BT.709, Normal1: BT.2020, Wide DR: BT709, Wide DR: BT2020, PQ: BT2020, HLG: BT2020, Canon Log 3: BT709, Canon Log 3: BT2020
- Image Quality Adjustment: Master Pedestal, R-Gain, B-Gain, R-Black, B-Black, Gamma, Color Matrix, Knee, Skin Detail, Sharpness, Black Gamma, Noise Reduction
- Min. Subject Illumination: Approx. 3 lux (shutter speed 1/60 sec., Frame Rate 59.94P, Gain 33.0 dB)
- Pan and Tilt
- Pan and Tilt
- Pan operation range: Horizontal ±170°
- Pan operation speed: 0.5° ~ 25°/sec.
- Tilt operation range: Vertical -50° ~ +30°
- Tilt operation speed: 0.3° ~ 20°/sec.
- Pan, Tilt, Zoom operation: Simultaneous
- Repeatability: ± 7'
- Turning Radius: Pan: 620mm dia., Tilt: 430mm dia.
- Pan and Tilt
- Output Format
- SDI
- 3840x2160: 59.94P (4:2:2 10 bit)
- 1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)
- Supported Control Protocols: Canon NU Protocol
- SDI
- Interface
- Control Terminal: RS-422 Serial
- 12G-SDI OUT Terminal: BNC jack (output only) x 1
- GEN-LOCK Terminal: BNC jack x 1
- AUX Terminal: Yes
- Environmental
- Dustproof Waterproof Rating: IP55
- Wiper: Yes
- Paint: Salt-resistant
- Noise: Less than NC55 under 10° / sec.
- Wind Resistance
- Normal Operation: 0-25m/s
- Operation Possible: 25-35m/s
- Non-Destructive: 35-60m/s
- Operating Environment
- Temperature: -15°C – +40°C (+5°F – +104°F)
- Humidity: 10% – 90% (without condensation)
- Other
- Power Source: External: DC 10.5-15 V, 90W
- Dimensions (WxHxD): Approx. 337x390x386mm (13.27x15.35x15.2”) (excluding protrusions)
- Weight: Approx. 17 kg (37.48 lbs)
- Supported Controllers: Hardware: RC-IP100
