Canon’s RC-IP100 provides control for up to 100 supported cameras. Through the serial port, it controls one compatible Canon camera via the NU protocol. The controller is equipped with a large 7” diagonal touch screen, zoom lever and joystick in order to pan, tilt, zoom and change camera picture settings with precise precision. The smooth responsiveness of the joystick allows operators to capture on-air movements with confidence. Pair this controller with a supported Canon PTZ camera to create the ideal camera/controller combination into your video production.
Supported Canon cameras include:
- CR-N700
- CR-N500
- CR-N300
- CR-X500
- CR-X300
- C500 Mark II (requires firmware v1.0.3.1 or later)
- C300 Mark III (requires firmware v1.0.1.1 or later)
- XF605 (requires firmware v1.0.1.1 or later)
Canon RC-IP100 Features
- Control up to 100 Canon Supported cameras
- Smooth PTZ movement and Precise Control for Professional Productions
- Adjust Pan, Tilt, Zoom and Change Camera Function Settings Remotely
- Equipped with 7” diagonal Touch Screen, Control and Zoom Lever and 4 Customizable Buttons
- RC-IP100 PTZ Joystick Controller1
- Power12V DC (AC adapter power supply) CAUTION: Utilize included 12V DC power supply only. All other power supplies may cause permanent damage to controller.
- Dimensions (WxHxD)13.7x4.3x7.1" (350x110x182mm)
- WeightApprox. 2.1 kg (4.6 lbs)
- Operating Temperature0°C ~ 40°C
- Camera Control
- Controller Supported Cameras: CR-N700, CR-N500, CR-N300, CR-X500, CR-X300, C500 Mark II (requires firmware v1.0.3.1 or later), C300 Mark III (requires firmware v1.0.1.1 or later), XF605 (requires firmware v1.0.1.1 or later)
- Number of Connectable Cameras
- 1 unit (RS422)
- 100 units (*When RS422 is connected: 99 units)
- Preset (Store/Play/Delete): 100 per camera
- Trace (Store/Play/Delete): 10 per camera
- Communication System: IPv4
- Touch Panel: 7-inch (diagonal) touch screen
- Terminal
- Tally: D-Sub 9 pin
- LAN: R -45 x 1 (10 BASE-T/100 BASE-TX)
- Serial: RJ-45 x 1 (RS422)
