The FSE-BP50 is a rugged, water-resistant multi-channel beltpack that operates in the ISM license-free 5 GHz frequency range. The beltpack has an ergonomic design with nine programmable keys, large color screen, dedicated A & B encoders, individual level controls for C & D, and overall dedicated master volume control.
Clear-Com FSE-BP50-X4 Features
- TFT color display
- 4 top buttons with individual level control
- 5 additional programmable buttons
- Rotary controls on both sides and up/down level controls
- Master volume control on bottom
- Mic and speaker mode
- Built-in flashlight
- Drop-in and USB-C charging
- 5GHz radio frequency and 5GHz scanner mode
- 20-27 radio channels (region specific)
- Robust radio link works in high multipath or reflective environments
- Dual redundant radios
- Bluetooth Low Energy (BLE) radio - beltpack pairing and firmware updates over the air
- Low latency audio
- Wi-Fi coexistence
- AES256 shared key encryption
- FSE-BP50-X4 FreeSpeak Edge 5 GHz wireless beltpack1
- Audio
- Audio Bandwidth: 200Hz - 12kHz
- No. of Full-Duplex Audio Paths: 9
- Mode of Operation: full duplex on all routes
- Level/Talk Controls: 9 push buttons, 5 level controls (2 rotary and 2 button level controls, with 1 master level control)
- Menu Button: 1
- Headset Connector: 4-pin male, Clear-Com standard, options for 5-pin female and 7-pin male with PTT
- Microphone Type: electret and dynamic, selectable in beltpack menu
- Headset Limiter: selectable from beltpack menu
- Radio
- Frequency Spectrum: 5170 -5875MHz (20MHz channels set by country)
- Output Power: adjustable from 1-24dBm (max. output power is determined by selected channel and country)
- Modulation: OFDM
- Range: typical indoor range 250 ft, typical outdoor range 750 ft
- Battery
- Battery: 4400mAh
- Power: 16Wh
- Typical Voltage: 3.6V
- Battery Life: 12 hours
- Operating Temperature32°F to 113°F (0°C to 45°C)
- Humidity20-90% non-condensing
- Dimensions (WxHxD)5.31" x 4.07" x 1.92"
- Weight0.96 pounds
