The MS-802-IM is a 1RU two-channel main station with programmable front panel buttons, individual channel short-circuit protection, individual channel volume control, and a regulated fail-safe power supply. The MS-802-IM supports up to 55 beltpacks or 10 speaker stations.
Clear-Com MS-802-IM Features
- Supports up to 55 beltpacks or 10 speaker stations on two channels
- IP-20 environmental rating
- Asbestos-free in accordance with SOLAS Regulation II-I/3-5.2
- Marine Certification compliant with DNVGL-CG-0339 (2016)
- Separate short-circuit protection for each channel
- Program feed to both channels, with selectable Program Interrupt (IFB)
- Remote Mic Kill
- Announce output with relay
- Visual and audible Tone Alert signaling
- Built-in speaker
- Universal voltage power supply
- MS-802-IM Encore 2-Channel 1RU Main Station1
- Station CapacityUp to 55 RS-801-IM beltpacks or 10 speaker stations or 12 headset stations distributed over both channels
- Panel Microphone Input
- Input Type: Electret
- Input Impedance: >=2K
- Mic Limiter Threshold: 0dBu ±3dB
- Mic Limiter Range: >= 20dB
- Headset Microphone Input
- Input Type: Dynamic
- Input Impedance: >= 1K
- Mic Limiter Threshold: 0dBu ± 3dB
- Mic Limiter Range: >= 15 dB
- Program Line Input
- Maximum Level before Clipping: >= 20dBu
- Input Impedance: >= 5K
- Headset Output
- Load Impedance: >= 8
- Output Impedance: <= 25
- Output Limiter Threshold: +5dBu ± 3dB
- Maximum Output Level before Distortion: >= 17dBu
- Speaker Output
- Load Impedance: >= 4
- Max Output Level before 1% Distortion: 20dBu ± 2dBu
- Partyline Output
- O Noise: < -74dBu
- Output Impedance: >10K
- Partyline Input
- Crosstalk: < -60dB
- Max level before Clipping: >= 12dBu
- Sidetone Null Capability: > 25dB
- Stage Announce/Balanced Line Out
- Type: Balanced
- Output Impedance: >= 200
- Load Impedance: >= 600
- IFB/Hot Mic
- Type: Unbalanced
- Output Impedance: 180
- Load Impedance: >= 600
- Frequency Response
- Panel Mic – Partyline: 600 – 10kHz ± 3dB
- Headset Mic – Partyline: 200 – 12kHz ± 3 dB
- Headset Mic – Line Out: 200 – 12kHz ± 3 dB
- Program Input – Partyline: 100 17kHz ± 3 dB
- Program Input – Headset Out: 200 – 10kHz ± 3 dB
- Program Input – Speaker Out: 300 – 10kHz ± 3 dB
- Partyline – Headset Out: 200 – 10kHz ± 3 dB
- Partyline – Speaker Out: 300 – 10kHz ± 3 dB
- Max Distortion
- Panel Mic – Partyline: <= 0.5%
- Headset Mic – Partyline: <= 0.5%
- Headset Mic – Line Out: <= 0.5%
- Program Input – Partyline: <= 0.2%
- Program Input – Headset Out: <= 0.2%
- Program Input – Speaker Out: <= 0.5%
- Partyline – Headset Out: <= 0.2%
- Partyline – Speaker Out: <= 0.5%
- Noise
- Panel Mic – Partyline: < -65dBu
- Headset Mic – Partyline: < -70dBu
- Headset Mic – Line Out: < -55dBu
- Program Input – Partyline: < -85dBu
- Program Input – Headset Out: < -60dBu
- Program Input – Speaker Out: < -60dBu
- Partyline – Headset Out: < -50dBu
- Partyline – Speaker Out: < -50dBu
- Max Gain
- Panel Mic – Partyline: >= 37dB
- Headset Mic – Partyline: 41dB ± 2dB
- Headset Mic – Hot Mic Out: 55dB ± 3dB
- Headset Mic – Announce Out: 55dB ± 3dB
- Program Input – Partyline: >= -16dB
- Program Input – Headset Out: >= 18dB
- Program Input – Speaker Out: >= 24dB
- Partyline – Headset Out: >= 34dB
- Partyline – Speaker Out: >= 40dB
- Min GainPanel Mic – Partyline: <= 25dB
- Mains Power
- Input Voltage Range: 100 – 240V AC
- Input Frequency Range: 50 – 60 Hz
- Input Power: <= 60V AC
- Output Voltage: 30V DC ± 0.5V
- Output Current per Channel (Continuous): 1.2A
- Output Current per Channel (Peak): 2A (Do not exceed the 1.2A rating for more than 2 seconds per 1 minute period)
- Short Circuit Recovery Time (1st short): <= 0.5 sec
- Short Circuit Recovery Time >= 20 shorts in 20sec: <= 20 sec
- Environmental
- 32 – 122°F (0 – 50°C)
- Relative Humidity: 0 – 96%, non-condensing
- Vibration Frequency Range: 2 – 13.2Hz
- Amplitude: 1.0mm
- Peak Value Frequency Range: 13.2 – 100Hz,
- Acceleration Amplitude: 0.7g
- EMC: DNVGL-CG-0339 – Class A
- Enclosure: IP-20
- Dimensions (HxWxD)1.75x19x6.5" (44x483x165mm)
- Weight6.1lbs (2.8kg)
- Certifications and Compliance
- This device complies with part 15 of the FCC Rules.
- This device complies with European Union CE Mark:
- Electromagnetic Compatibility Directive 2014/30/EU
- Low Voltage Directive 2014/35/EU
- RoHS Directive 2011/65/EU
- Standards: EN 55032, EN 55024, EN 60950-1, EN 50581
- This device complies with Maritime Certification
- Conformity with DNVGL-CG-0339 Edition November 2016
- Asbestos-free in accordance with SOLAS Regulation II-I/3-5.2
- Compass Safety Distance conformity per DNVGL-CG-0339 and IEC 6094
