Community IP8-1122 12-Inch Surface Mount Install Speaker

The Community IP8-1122 12-Inch Surface Mount Install Speaker provides exemplary acoustic performance, modular flexibility and elegant aesthetics for modern performance venues. Designed to support the goals of systems integrators and consultants both acoustically and mechanically, I SERIES includes a wide variety of arrayable, rotatable coverage patterns and a comprehensive selection of modular bracket systems that accelerate system design and system commissioning.

FEA-optimized linear suspensions, high-flux neodymium motors, and integral demodulation rings ensure precise control and very low distortion at high SPL levels. The custom long-excursion LF driver delivers deep bass response and a balanced midrange in the most demanding applications. The HF compression driver's non-metallic diaphragm provides natural, transparent sound quality that accurately reproduces and complements any source.

The rotatable 13-inch (330mm) HF waveguide provides well-defined coverage and a smooth off-axis response that enhances arrayability. Individually voiced crossovers produce proper beamwidth matching transitions and identical sonic signatures, permitting horn patterns to be mixed throughout an installation. Additionally, user selectable single amp or biamp operating modes expand application flexibility.

Community IP8-1122 Features

• Nominal Beamwidth (H x V): (120° x 60°)
• Finish: Uniformly textured painted 15mm Baltic Birch plywood with powder-coated steel grille
• Continuous Max Output (with processing): 123 dB (129 dB Peak)
• Power Handling: 800W continuous at 8 ohms (Passive)
• Operating Range: 43 Hz - 22.4 kHz
• Sensitivity (1W/1m): 94 dB
• Transducers: LF - 1 x 12", 3" voice coil, demodulation ring, neodymium compression driver; HF - 1 x 1.4" exit, 2.6" voice coil, demodulation ring, ketone polymer diaphragm, neodymium compression driver
• Dimensions (HxWxD): 28x14.5x17.7" (711x367x449mm)

• IP8-1122 12-Inch Surface Mount Install Speaker1

• Operating ModePassive or Biamp with DSP
• Operating Environment Indoor or Weather-Resistant Outdoor
• Operating Range[2]44 Hz to 18.5 kHz
• Nominal Beamwidth (HxV) 90°x40°, rotatable waveguide
• Transducers
  • LF 1 x 12" (305mm) neodymium driver, 3" (76mm) voice coil, demodulation ring
  • HF 1 x 1.4" (36mm) exit compression, 2.6" (66mm) voice coil, demodulation ring, ketone polymer diaphragm, neodymium compression driver
• Continuous Power Handling [3] @ Nominal Impedance
  • Passive* - 80V: 800W @ 8 ohms (3200W peak)
  • LF - 69V: 600W @ 8 ohms (2400W peak)
  • HF - 25V: 80W @ 8 ohms (320W peak)
• Nominal Sensitivity [4]
  • Passive
    • @ 1W: 95 dB
    • @ 2.83V: 95 dB
  • LF
    • @ 1W: 95 dB
    • @ 2.83V: 95 dB
  • H
    • @ 1W: 106 dB
    • @ 2.83V: 106 dB
• Nominal Maximum SPL[5] (Whole Space)
  • Passive
    • Peak: 130dB
    • Continuous: 124 dB
  • LF
    • Peak: 129 dB
    • Continuous: 123 dB
  • HF
    • Peak: 131 dB
    • Continuous: 125 dB
• Equalized Sensitivity[6]
  • System
    • @ 1W: 93 dB
    • @ 2.83V: 93 dB
• Equalized Maximum SPL[7]
  • System
    • Peak: 128 dB
    • Continuous: 122 dB
• Recommended Amplifiers
  • Passive: 800W - 1600W @ 8 ohms, (80V - 113V)
  • LF: 600W - 1200W @ 8 ohms, (69V - 98V)
  • HF: 80W - 160W @ 8 ohms (25V - 36V)
• PHYSICAL
  • Input Connection: (2) Screw terminal blocks (6-position)
  • Mounting Points: (15) M10 threaded rigging points
  • Environmental Outdoor: IP55W per IEC 60529 , MIL-STD-810G
  • Weight: 55 lbs (24.9 kg) loudspeaker only
  • Dimensions (HxWxD): 28x14.5x17.7" (711x368x450mm)
  • Finish Refer to the Technical Drawing