Community R.5-TZ 12-Inch Weather-Resistant Speaker

The Community R.5-TZ 12-Inch Weather-Resistant Speaker delivers outstanding musical performance. Housed in the same size enclosures as Community’s flagship R.5 models, the two R.5-MAX models feature powerful 1.4-inch exit HF drivers and 600W neodymium woofers, delivering well behaved coverage patterns, exceptional intelligibility and flat frequency response. While providing the outstanding dynamic range and projection expected from R SERIES, the R.5-MAX offers listeners a superior musical experience with higher output than the R.5HP.

Community R.5-TZ Features

• Premium music applications, longer distances
• Flat, passive frequency response
• Very high power density and output

• R.5-TZ 12" 2-Way Full-Range 70V / 100V Speaker1
• Yoke bracket1
• Aiming strap 1

• Loudspeaker Type2-way, horn loaded coaxial, weather-resistant
• Operating Range
  • 85 Hz to 16 kHz
  • 125 Hz to 10 kHz (±4 dB)
• Max Input Ratings200W, 70V/100V
• Recommended Power Amplifier
  • 25W to 200W @ 70 Volts
  • 50W to 200W @ 100 Volts
• Sensitivity (1W/1m)
  • 102 dB SPL (125 Hz to 10 kHz 1/3 octave bands)
  • 102 dB SPL (250 Hz to 4 kHz speech range)
• Maximum Output on 200W Tap125 dB SPL
• 200W Nominal Impedance25 ohms
• 200W Minimum Impedance16.4 ohms @ 9.3 kHz
• Axial Q / DI21.4 / 13.3, 1.6 kHz to 12.5 kHz
• Crossover Frequency2 kHz
• Recommended Signal Processing90 Hz high pass filter
• Drivers
  • LF (1) 12” Ferrofluid-cooled
  • HF (1) 1” exit, titanium free, Ferrofluid-cooled
• Driver ProtectionDYNA-TECH
• Input Connection12 foot (4 m) SJOW #16 gauge
• Controls
  • 4 position autoformer TAP select switch
  • 70V switchable taps @ 200W, 100W, 50W, 25W
  • 100V switchable taps @ 200W, 100W, 50W
• EnclosureRotomolded LLDPE, light gray
• Mounting/Rigging Provisions(5) 3/8-16 rigging points
• Grille3-layer WeatherStop™, light gray (Zinc-rich epoxy dual-layer powder coated perforated steel grille, foam, woven poly mesh)
• Environmental PerformanceIEC529 IP55W rating with a minimum 5-degree downward aiming angle
• Required Accessories24 dB/Oct high pass filter
• Optional AccessoriesPMB Series pole mount brackets
• Dimensions (HxWxD) 16x16x15.94" (406.4x406.4x404.88 mm)
• Weight37 lbs (16.8 kg)
• Shipping Weight42 lbs (19.1 kg)
• Notes
  • 1. Sensitivity: Free field pink noise measurement at 35 ft (10.7 m) at 75% power; extrapolated to 1 meter and an input of 2.83 volts RMS.
  • 2. Watts: All wattage figures are calculated using the rated nominal impedance.