Skip to main content
DAS Audio INTEGRAL-A1004 4-Channel 250W at 4 Ohms Power Amplifier
DAS Audio INTEGRAL-A1004 4-Channel 250W at 4 Ohms Power Amplifier

DAS Audio INTEGRAL-A1004 4-Channel 250W at 4 Ohms Power Amplifier

SoundPro Item: 130370
MPN: INTEGRAL-A1004
Call for Info
Add to Wish List

Account manager
Contact an Account Manager for your personalized price

INTEGRAL-A1004 is a quad channel, 2U, high efficiency class D amplifier intended for permanent installation use. It is equipped with switching universal mains power supply and auto-standby functionality when no signal presence is detected providing energy savings.

The amplifier delivers 4x250W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 2x500W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter.

The sober and elegant design together with the euro-block type connectors and energy savings makes it perfect for permanent installations.

DAS Audio INTEGRAL-A1004 Features

  • 4 channel amplifier, Class D
  • 4 independent inputs
  • 250 W per channel @ 4 ohms
  • Low Z and High Z (Bridged 70 V/100 V) operation
  • Hybrid configuration operation (Hi Z and Low Z)
  • Universal Power Supply
  • 12dB/oct 80Hz HPF filter Selector (on/off)
  • Automatic Stand-by mode
  • INTEGRAL-A1004 4-Channel 250W at 4 Ohms Power Amplifier1
  • Output Power Ratings
    • Power 8 Ohms, Both Channels Driven: 4 x 125W
    • Power 8 Ohms Bridged: 2 x 500W
    • Power 4 Ohms, Both Channels Driven: 4 x 250W
    • Power 100V: 2 x 500W
    • Power 70V: 2 x 500W
  • Electronics and Connectors
    • Amplifier Channels: 4
    • Output Circuitry: Class D
    • Frequency Response: 20 Hz-30 kHz (+0 – 0.5 dB)
    • Sensitivity: 1.38 V (+5 dBu)
    • Voltage gain: 30.4 dB
    • Damping Factor: > 1000 (8 Ω load, 1 kHz and below)
    • Controls: Power On/Off, Gain Pots
    • Cooling: Side-Right-to-Left
    • Amplifier Protections: Short Circuit, DC Output, Temperature, Over/Under Voltage
    • LED Indicators: On-Protect-Standby, Signal-Clip
    • Audio Signal Input Connector: Terminal Block
    • Speaker Output Connector: Terminal Block
    • Current Draw 230V / 115V: 1.75 A / 3.5 A
  • Dimensions (HxWxD)3.5x19x8.2” (88x483x208mm)
  • Net Weight8.2 lbs (3.7 kg)
  • Shipping
    • Carton Dimensions (HxWxD): 6.7x20.7x12.4” (170x525x315mm)
    • Shipping Weight: 9.9 lbs (4.5kg)

In The Box

Customer Reviews