The DAS Audio INTEGRAL-M26X, a 1U rack-mount digital signal processor, features two analogue input channels and six analogue output channels equipped with balanced XLR connectors. Its compact, cost-effective design makes it a versatile choice for live and installed PA systems.
Remote control and monitoring are possible via ALMA™ software using IP technology, or alternatively, it can be managed using external controllers through OSC messages. Direct unit control is facilitated through a 1.54″ OLED display with control buttons for basic parameters. These include input and output levels, preset recalls, mute, source selection, and link manager functions.
The device houses a complete signal processing matrix, offering gain, delay, routing, equalization, and limiters adjustment options. Its internal memory can store over 100 global presets and 200+ output channel presets, including specific presets for all DAS Audio speakers.
External control is further simplified through a General-Purpose Input / Output (GPIO) connector, providing an external 3V3 volt, GND signal, and 8 configurable pins via ALMA™ software.
DAS Audio INTEGRAL-M26X Features
- 2 Input x 6 Output, 1U Rack-Mount advanced DSP
- Remote & Direct Control: 1.54″ OLED, ALMA™ software via IP
- 100+ global presets: 200+ output channel presets
- GPIO External Control with 8 configurable pins
- 24 Bit @ 48 kHz Converters: 118 dBA Dynamic Range
- Advanced EQ & Filters: Including up to 48 dB/oct settings
- Maximum Input / Output level +21dBu
- INTEGRAL-M26X Rackmount Digital Signal Processor1
- Electronics and Audio
- Frequency Response: 20 Hz-30 kHz (+0 -0.5 dB)
- Max Input Level: +22 dBu
- Max. Output Level: +22 dBu
- Controls: Power On/Off, Navigation Buttons
- Sampling Rate: 48 kHz
- Display: OLED 1.54″
- Cooling: Side-Right-to-Left
- LED Indicators: On, Comms, Signal, Limit
- Power
- AC Input Connector: IEC 15A
- Power Supply: Universal Mains Switch Mode
- Operating Range: 90 – 250 VAC
- DSP
- Analog Input Channels: 2
- Analog Output Channels: 6
- AD Converters: 24 Bit @ 48 kHz 118 dBA Dynamic Range
- DA Converters: 24 Bit @ 48 kHz 118 dBA Dynamic Range
- Internal Precision: 32 Bit, 64 Bits Double Precision
- Latency: 1 ms
- Delay: 50ms per input / 135ms per output
- Equalizer: Bell, Lo/Hi-Shelving, Hos
- Crossover: Linkwitz-Riley, Butterworth, Bessel
- High and Low Pass Filters: Up to 48 dB/oct
- Limiters: RMS
- Dimensions
- Dimensions (HxWxD): 1.7x19x8.3” (44x483x210mm)
- Net Weight: 5.5 lbs (2.5 kg)
- Shipping
- Carton Dimensions (HxWxD): 17.3x15.7x2.4” (440x400x60mm)
- Shipping Weight: 8.8lbs (4kg)
