dBTechnologies DVA T12 12-Inch Powered Line Array Speaker

DVA T12 features state-of-the-art neodymium speakers and high-performance DIGIPRO digital amps with total of 1,410W output power. In combination with top-drawer DSP and premium quality AD-DA converter, it delivers high-definition sonic images with massive SPL for large sound reinforcement applications.

A 12" neodymium woofer in a band-pass housing covers the low frequency range. Remarkably powerful, it packs an assertive punch that reaches down to 60 Hz to enable fullrange applications. The 12" woofer is slanted inside the housing, giving the cabinet a lean, unobtrusive look.

Two 6.5" neodymium midrange are placed close together to maximize coherent coupling and response for those critical midrange frequencies. The speaker resides in a sealed basket to optimize the displacement volume. This makes the midrange even more responsive. With a high BL factor, it reacts far faster to transients and renders each attack with awesome accuracy. Both 6.5" midrange are equipped with an optimized phase plug and feed into a frontloaded horn to achieve a uniform coverage pattern.

The DVA T12 is loaded with 3 1" HF drivers tuned specifically for the custom designed array horn. This combination maximizes the coupling of the drivers‘ outputs and extends the range of the HF signal.

dB Technologies DVA T12 Features

• Long-throw system
• Fully powered 3-way unit
• Switched mode power supply (SMPS) with PFC works from 90V to 240V
• Freely scalable to setups of any size
• High-end digital controller on board
• Network ready with integrated RDNet port
• 9 on-board preset equlizations for fast and easy setup
• Hardware and acoustical design is compatible with DVA T series

• DVA T12 active line-array speaker1

• Speaker type3-way active line array module
• Frequency response (-6dB)60-19,000Hz
• Max SPL136 dB
• HF3x 1"
• HF voice coil1.4"
• Directivity100°x10°
• MF2x 6.5"
• MF voice coil2"
• LF12"
• LF voice coil3"
• Amplifier technologyDigipro® G2 Class D
• HF amp350W RMS
• MF amp350W RMS
• LF amp710W RMS
• Coolingconvection
• ControllerDSP 56 bit
• AD/DA converter24bit/96kHz
• System presets8 HF/low-mid correction)
• Limiterdual active limiter, multiband RMS, peak, thermal
• Crossover frequency MF-HF1800Hz
• Slope MF-HF24dB/Octave
• Crossover frequency LF-MF420Hz
• Slope LF-MF24dB/Octave
• Signal input1x XLR fem, bal
• Signal output1x XLR male, bal
• NetworkRDNet remote control RJ45 connector in/out
• Power socket1x Powercon in, 1x Powercon out
• Voltage range90-240V
• Housingaluminum reinforced polypropylene PP
• Rigging pointsintegrated rigging hardware
• Dimensions (WxHxD)23.2" x 15.44" x 17.2"
• Weight63.93 pounds (29.9 kg)