Decimator MD-QUAD V3 4-Channel MultiViewer

The Decimator MD-QUAD V3 4-Channel MultiViewer is a 1 to 4 Channel Multi-Viewer / Quad-Split with SDI and HDMI outputs for 3G/HD/SD and Custom Layouts.

Decimator MD-QUAD V3 Features

• Support both 3G level A and B on the input and output. Allowing conversion between 3G level A and B.
• Professional 3G/HD/SD Test Pattern Generator featuring:
• 26 Selectable Output Formats
• 54 Test Patterns including Luma and Chroma Zone-plates
• Audio Tone Generator
• Horizontal and/or Vertical image flipping per window
• Low cost miniature (3G/HD/SD)-SDI 1 to 4 channel Multi-Viewer or 4 to 1 input multiplexer
• Custom Layouts with various standard layouts
• 16 Character UMD overlay per window with individual enables, custom positioning and size
• 8 Channel Audio Metering overlay per window with individual enables, custom positioning and size
• Tallies can be applied to either Tally Boxes (Default) or Border
• Tally boxes allows for up to 4 Tallies per window (Green, Red, Blue and Yellow)
• Load and restore Custom Layouts
• Fast switching between inputs using Full-Screen scaling
• Selectable output format in both Full-Screen and Multi-Viewer mode
• Low latency buffering for each input allowing non-synchronous inputs
• Linked (3G/HD/SD)-SDI and HDMI outputs
• 4 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)
• Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
• Variable aspect ratios per window
• Pass-Through mode allowing any of the 4 inputs to be selected and routed to both the (3G/HD/SD)-SDI and HDMI outputs
• An extensive selection of user controllable functions via a easy to use rotary encoder for menu selection.
• LEDs and a push button can then be used for status and control
• USB port for control and updates
• Locking DC Power Socket
• 5 GPI on standard RJ-45 connector connector for Tallies and Remote Switching
• RS422/485 is also include on the same RJ-45 connector for Dynamic UMD and Tallies via TSL protocol

• MD-QUAD V3 4-channel multiviewer1
• Power supply1
• HDMI cable1
• USB cable1
• Mounting bracket1

• SDI Formats
  • 3G: SMPTE 424M@2.97 and 2.967Gb/s
  • 1080p@60/59.94/50Hz
  • HD:SMPTE 292M/274M/296M@1.485 and 1.435Gb/s
  • 1080i@60/59.94/50Hz
  • 1080p/psf@30/29.97/25/24/23.98Hz
  • 720p@60/59.94/50/30/29.97/25/24/23.98Hz
  • SD:SMPTE 259M@270Mb/s
  • 625i50
  • 525i59.94
• Inputs
  • Input Equalization > 100M using Belden 1694A
  • USB for control and updates
  • GPI on RJ-45
• Outputs
  • 1 x 10-bit (3G/HD/SD)-SDI re-clocked
  • HDMI
• Power
  • +5V to +24V DC, 6 Watts
  • Positive Centre Pin
• LED Status
  • Power
  • 4 x Signal lock and rate
• Menu Options
  • Input status for all 4 inputs
  • Output format
  • Output selection of Quad Split or input 1, 2, 3, or 4
  • Output aspect and type of 16:9 or 4:3 at either 90 or 100% of screen size
  • Individual aspect format for each input of Same as output, Letter-box or Pillar-box
  • Border Enable
  • Quad split mode reference of either Free-run or input 1
  • Enables for On-Screen Overlays
  • Basic Audio Meter control
• Dimensions3.5" x 3.7" x 0.9"