DPA 4011C Cardioid Condenser Microphone

The d:dicate 4011C is an outstanding choice for unobtrusively miking all types of television, film, theater, concert and studio performances.

When used to spot-mike larger orchestras, these mics are hard to beat. Capable of handling high SPLs without distortion, the d:dicate 4011C is perfectly tailored for close-miking applications; minimizing bleed from other instruments. In film and TV studios, they are excellent for off-camera voice recording or Foley work. For live on-camera recordings, their matte black finish gives them a classic yet inconspicuous appearance, while for sound reinforcement in concert halls, theatres and houses of worship, they provide clean, natural sound while reducing the noticeable effect of lighting reflection.

DPA 4011C Features

• Close-miking
• Great for high sound levels
• Accurate sound
• Colorless sound
• Modular flexibility

• 4011C cardioid microphone1
• Foam windscreen1
• Mic clip1

• Transducer TypeCondenser
• Polar PatternCardioid
• Frequency Response20 Hz - 20 kHz
• Rated Output Impedance100 ohms
• Sensitivity, nominal, ±2 dB at 1kHz10 mV/Pa; -40 dB re. 1 V/Pa
• Equivalent Noise Level, A-weightedTyp. 18 dB(A) re. 20 µPa (max. 20 dB(A))
• Equivalent noise level, ITU-R BS.468-4Typ. 25 dB (max. 27 dB)
• Distortion, THD <1%136 dB SPL RMS, 139 dB SPL peak
• Dynamic RangeTyp. 121 dB
• Max. SPL, THD 10%152 dB SPL peak
• Cable Drive Capability100 m (328 ft)
• Output Balance PrincipleImpedance balancing with Active Drive
• CMRR> 50 dB
• Power Supply (for full performance)P48 (Phantom Power)
• Current Consumption2.8 mA
• ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Maximum output voltage, RMS4.5 V
• Matching tolerance (frequency response and sensitivity)±1 dB
• Phase Deviation for Kit< 10°
• Dimensions0.75" diameter x 2.5" length
• Weight2 oz