Our wide cardioid microphones are capable of handling extremely high sound pressure levels before clipping occurs. The d:dicate 4015A Wide Cardioid Microphone even includes a 20 dB pad switch in the center of the XLR connector to prevent overloading of the mic amplifier.
If you are already a d:dicate 4011 Series devotee, you will discover an exciting alternative in DPA's wide cardioid microphones. It differs in its polar pattern and is the perfect fill-in between an omnidirectional and a more directional microphone.
DPA 4015A Features
- Low profile wide pickup area
- Natural reproduction
- Directional ambience pickup
- Exceptional for vocals
- Modular flexibility
- 4015A wide cardioid microphone1
- Foam windscreen1
- Mic clip1
- Transducer TypeCondenser
- Polar Patternwide cardioid
- Frequency Response20 Hz - 20 kHz
- Rated Output Impedance200 ohms
- Sensitivity, nominal, ±2 dB at 1 kHz10 mV/Pa; -40 dB re. 1 V/Pa
- Equivalent noise level, A-weightedTyp. 18 dB(A) re. 20 µPa (max. 20 dB(A))
- Equivalent noise level, ITU-R BS.468-4Typ. 25 dB (max. 27 dB)
- Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
- Dynamic rangeTyp. 121 dB
- Max. SPL, THD 10%159 dB SPL peak
- Switchable attenuator, filters etc.0 dB / -20 dB
- Cable drive capability100 m (328 ft)
- Output balance principleImpedance balancing with Active Drive
- CMRR> 60 dB
- Power supply (for full performance)P48 (Phantom Power)
- Current consumption2.8 mA
- ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Maximum output voltage, RMS8V
- Matching Tolerance (frequency response and sensitivity)±1 dB
- Phase Deviation for Kit<10%
- Dimensions0.75" diameter x 6.7" length
- Weight5.6 oz