DPA FA4018VSL1B Vocal Microphone Capsule with Wireless Adapter

Wireless SLI for Shure, Sony, Lectrosonics and Line6. By using original DPA adapters, the d:facto II supercardioid mic head can be used with a variety of other transmitting products.

The SL1 adapter ensures perfect mechanic and electronic fitting to wireless systems from Shure, Sony, Lectrosonics and Line6.

With unsurpassed capsule perfection, a three-stage pop-protection grid, perfect shock mounting and an electronic design handling high voltage from the capsule, the d:facto II sounds much more dynamic and distinct than any other wireless, even with entry level systems.

DPA FA4018VSL1B Features

• Extraordinarily natural sound
• Perfectly uniform supercardioid directionality
• High separation
• Extreme SPL handling
• Low handling noise
• Sleek design
• Flexible adapter system fits most professional wireless systems

• FA4018VSL1B vocal microphone capsule1
• Wireless adapter1
• Grid1

• Directional Patternsupercardioid
• Principle of Operationpressure gradient
• Cartridge Typepre-polarized condenser
• Frequency Response20Hz - 20,000Hz
• Effective Frequency Range ±2 dB at 4.7"40Hz - 16,000Hz with 3 dB soft boost at 12,000Hz
• Sensitivity, Nominal, ±2 dB at 1kHz
  • 5 mV/Pa; -46 dB re. 1 V/Pa
  • 2 mV/Pa; -54 dB re. 1 V/Pa with Adapter for wireless
• Equivalent Noise Level, A-weightedTyp. 19 dB(A) re. 20 µPa (max. 21 dB(A))
• Distortion, THD <1%136 dB SPL RMS, 139 dB SPL peak
• Dynamic Rangetyp. 120 dB
• Max. SPL, THD 10%160 dB SPL peak
• Rated Output Impedance100 Ω
• Min. Load Impedance1 kΩ
• Cable Drive Capability328 ft
• Output Balance Principleimpedance balancing with Active Drive
• CMRR> 50 dB at 1kHz
• Power Supply (for full performance)P48 (phantom power)
• Current Consumptionmax. 2.0 mA
• ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Max. Output Voltage, RMS8 V
• Polarity+V at pin 2 for positive sound pressure
• Temperature Range-40°F to 113°F (-40°C to 45°C)
• Relative Humidityup to 90%