A complete stereo pair; two DPA ST2006C Omni Condenser Microphones, selected on sensitivity within ±1.5 dB. Small, lightweight and inconspicuous main AB stereo pair.
The mics deliver precise sound and true tone. Meeting classic architecture and installation requirements, these mics can be mounted, hung or concealed to create clean, transparent recordings.
This condenser mic bridges the gap between the extreme sound quality of the d:dicate Microphones series and DPA's well-known Miniature Microphones in the d:screet and d:fine series.
DPA ST2006C Features
- Sensitivity-selected pair
- Acoustic authenticity
- Linear in a large frequency bandwidth
- Twin diaphragm capsule
- Modular flexibility
- Peli Case transportation and protection
- 2006C twin diaphragm omnidirectional microphones2
- Mic clips2
- Windscreens2
- Carry case1
- Transducer TypeCondenser
- Polar PatternOmnidirectional
- Frequency Response20 Hz - 20 kHz
- Rated Output Impedance100 ohms
- Sensitivity, Nominal ±2 dB at 1 kHz40 mV/Pa; -28 dB re. 1 V/Pa
- Equivalent Noise Level, A-Weightedtyp. 16 dB(A) re. 20 µPa (max. 18 dB(A))
- Equivalent Noise Level, ITU-R BS.468-4typ. 28 dB (max. 30 dB)
- Distortion, THD < 1%127 dB SPL RMS, 130 dB SPL peak
- Dynamic Rangetyp. 114 dB
- Max. SPL, THD 10%139 dB SPL peak
- Cable Drive Capability100 m (328 ft)
- Output Balance PrincipleImpedance balancing with Active Drive
- CMRR> 50 dB
- Power Supply (for full performance)P48 (Phantom Power)
- Current consumption2.8 mA
- ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Colormatte black
- Weight2.1 oz
- Dimensions0.75" diameter x 2.3" length
- Max. Output Voltage, RMS4.5 V
- Sensitivity Selection Tolerance (at 1kHz)±1.5 dB