DPA ST4011A Cardioid Condenser Microphones (Stereo Pair)

Even though the standard tolerances on the d:dicate microphones are extremely low, a stereo match is even closer. These specially selected d:dicate 4011A microphones are matched within ±1 dB on both frequency response and sensitivity.

The pair comes in a heavy-duty Peli Case for safe transportation and easy access to the microphones and accessories.

This condenser microphone is renowned in recording studios and live applications around the world as an exceptional mic. State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion.

DPA ST4011A Features

• Close-miking
• Great for high sound levels
• Carefully matched within ±1 dB
• Accurate sound
• Colorless sound
• Peli Case transportation and protection
• Modular flexibility

• 4011A cardioid microphones2
• Clips2
• Windscreens2
• Carry case1

• Transducer TypeCondenser
• Polar PatternCardioid
• Frequency Response20 Hz - 20 kHz
• Rated Output Impedance200 ohms
• Sensitivity, Nominal ±2 dB at 1kHz10 mV/Pa; -40 dB re. 1 V/Pa
• Equivalent Noise Level, A-WeightedTyp. 18 dB(A) re. 20 µPa (max. 20 dB(A))
• Equivalent Noise Level, ITU-R BS.468-4Typ. 25 dB (max. 27 dB)
• Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
• Dynamic RangeTyp. 121 dB
• Max. SPL, THD 10%159 dB SPL peak
• Switchable Attenuator, Filters, etc.0 dB / -20 dB
• Cable Drive Capability100 m (328 ft)
• Output Balance PrincipleImpedance balancing with Active Drive
• CMRR> 60 dB
• Power Supply (for full performance)P48 (Phantom Power)
• Current Consumption2.8 mA
• ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Colormatte black
• Weight5.6 oz
• Dimensions0.75" diameter x 6.7" length
• Max. Output Voltage, RMS8 V
• Matching Tolerance (frequency response and sensitivity)±1 dB
• Phase Deviation for Kit< 10°