Earthworks SR20sp G2 Vocal and Instrument Cardioid Microphone

The SR20sp is a matched stereo pair of Earthworks' SR20G2 vocal and instrument cardioid microphones.

Unwanted leakage comes from all directions — DM20’s uniform supercardioid pattern is engineered to provide more than 25 dB of rejection at 140 degrees and an average of over 16 dB across the back 180.

A third-octave polar chart reveals just how consistent the performance is across all frequencies — brilliant, detailed pickup across the front and dramatic, even attenuation across the back.

2nd-Gen Earthworks microphones draw only 6 mA of phantom power current, while increasing performance with all types of devices, including transformer-based preamps and splits.

Hot-plugging (connecting microphones with phantom power already on) can result in spikes with enough power to damage microphones, preamps and other equipment.

2nd-Gen Earthworks microphones have been hardened with power handling to exceed anything normally experienced with even the largest touring consoles and stageboxes.

The impulse response is fast and clean. The frequency response is flat and extended. DM20 Gen 2 doesn’t sound like a microphone — it sounds like your drum, only bigger.

Earthworks SR20G2 Features

• Vocal and Instrument Cardioid Microphone
• Flat and extended frequency response

• SR20G2 Vocal and Instrument Cardioid Microphone2
• RM2 Rim Mount1
• Microphone Bag1
• Foam Windscreen1

• FREQUENCY RESPONSE20Hz – 20KHz
• POLAR PATTERNCardioid
• SENSITIVITY -51 dBV/Pa (2.8 mV/Pa)
• PEAK ACOUSTIC INPUT 157dB SPL
• MINIMUM LOAD IMPEDANCE 1kOhm
• NOISE 20 dBSPL (A-Weighted)
• POWER REQUIREMENTS 48V, 6mA
• DIMENSIONS (LxD) 8x0.86" (203.2x21.84mm)
• COLOR Stainless Steel
• WEIGHT 0.4lbs (0.18kg)
• MANUFACTURER PART NUMBERDM20 G2
• GOOSENECK (L & D3.5in x 0.375" (88.9x9.53mm)