The PA2400T 2-Channel 400W 70/100V Power Amplifier from Electro-Voice delivers high-performance audio for demanding, long-term applications ranging from sound reinforcement, paging, life safety installations, and more. This power amp features bridgeable channels for increased power flexibility and an integrated dynamic limiter that minimizes distortion from output clipping. Adjust levels of each channel using marked level controls on the amp’s rear panel, while front panel LEDs give you at-a-glance updates of signal, dB, and limit.
Electro-Voice PA2450L Features
- Reliable high-quality power for installation
- Ideal for sound reinforcement, paging, and life safety
- 450W per channel @ 4 Ω (1 kHz)
- Bridged mono out for 900W into 8 Ω
- Compact 2 RU design
- Stepped rear-panel level attenuation
- Selectable 50 Hz or 300 Hz high-pass filter
- Thermal protection, peak limiting, turn-on delay
- Phoenix-type inputs and outputs
- Three-stage front-to-rear fans
- Integrated rack ears for direct mounting
- PA2450L 2-channel 450W power amplifier1
- Mains cord1
- Attachable feet4
- Screwlock connector set (for all inputs and outputs)1
- Frequency Response (-3dB)< 10Hz - 40kHz
- Intermodulation Distortion (SMPTE)< 0.1% (60Hz, 7kHz)
- DIM 30< 0.1% (3.15kHz, 15kHz)
- Signal-to-Noise Ratio (A-weighted)104dB
- Input Impedance (balanced)> 20kΩ
- Input Sensitivity0 dBu (775mV)
- Number of Channels2
- Network Control (IRIS-Net)no
- Amplifier Gain34.3 dB
- Continuous Rated Power (1kHz, THD 1%) 4Ω450 watts
- Impedance4/8Ω
- Crosstalk< < -75dB (ref. 1kHz, @ 10% rated output power)
- Rated Output Power (*rated load) THD < 1%, 1kHz450/220W (4ω/8ω)
- Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω400 watts
- Rated Output Power (*rated load) THD < 0.2%, 20Hz – 20kHz400/200W (4ω/8ω)
- Continuous Rated Power (1 kHz, THD 1%) 2Ω450 watts
- Continuous Rated Power (1 kHz, THD 1%) 8Ω220 watts
- Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω200 watts
- THD< 0.1% (@ rated output power MBW=80kHz, 1kHz)
- Slew Rate28V/µs
- Dimensions (HxWxD)3.46x19.02x15.98"
- Weight36.38 lbs
More about Electro-Voice’s Power Amplifier Series
The PA series of power amplifiers from Electro-Voice packs awesome audio, reliable performance, and safe operation into a compact, 2RU chassis design. All models of this power amp lines feature different hi-pass filters with switch-selectable cut-off frequencies to attenuate unwanted low-frequency signals. Compact, high-density power supply units boast low-leakage toroidal transformers, making these amps capable of extensive headroom that exceeds the listed power rating.
Achieve thermal stability while keeping noise to a minimum with infinitely-variable, low-noise fans. The amps’ direct “flow-thru” chassis design allows for a smooth flow of air from the front to rear for trouble-free operation even in smaller amp racks. Several protection circuits (including Dynamic Audio Limiters, Inrush Current Limiter, Short Circuit Protection, and Thermal Overload Protection) prevent damage to the power amp and any connected loudspeaker systems. All PA series “T” version models are equipped with high-performance output transformers; floating outputs for 50V, 70V, and 100V installations; and voltage limiters to protect the loudspeaker outputs against over-voltage.
Included with the PA models are phoenix-style screw-lock connectors that keep the amp from being accidentally disconnected, for a secure installation with audio signal and speaker cables.
