Electro-Voice RE3-BPCL UHF Wireless Lavalier Microphone System

Bodypack UHF wireless set featuring CL3 cardioid lavalier microphone for voice performance and presentations. The CL3 is a robust, general-purpose lavalier microphone. It is ideal for presentation and public speaking where its full and accurate sonic characteristics, coupled with its feedback-rejecting cardioid polar pattern deliver a clear and intelligible voice.

Setup is quick and simple using the RE3 clear frequency scan and sync functions, and the radio link between the robust bodypack transmitter and diversity receiver delivers rock-solid system performance.

Electro-Voice RE3-BPCL System Features

• Wireless UHF bodypack set
• Cardioid lavalier mic for vocal applications
• Ideal for performance and public speaking

• CL3 Cardioid Lavalier Microphone1
• RE3-BPT Bodypack Transmitter1
• RE3-RX Diversity Receiver1
• Receiver antennas2
• Universal power supply1
• AA batteries2
• Receiver rack mounting hardware kit1
• Owner's manual1
• Documentation packet1
• Declaration of conformity1

• RE3-ACC-CL3 Lavalier
  • Element type: Self-biased condenser
  • Frequency response: 100 Hz - 15 kHz
  • Polar pattern: Cardioid
  • Sensitivity: open circuitvoltage. 1 kHz: 20 mV/Pascal (-34 dBV/PA)
  • Maximum SPL: 115 dB SPL
  • Impedance: 3700 ohms
  • Power requirements: 3-9 VDC
  • Polarity
    • Pin #1 - Ground, shield
    • Pin #2 - Audio
    • Pin #3 - Bias voltage
    • Pin #4 - N/C
  • Dimensions (cable length): 56.3" (1430 mm)
  • Dimensions (head length): 1.04" (26.4 mm)
  • Dimensions (head diameter): 0.4" (10.1 mm)
  • Net weight: 0.758 oz (21.5 g)
  • Shipping weight: 6.35 oz (180 g)
  • Microphone connector: 4-pin mini plug
  • Head finish: Non-reflecting black
  • Material: Die cast aluminum, steel wire clothgrille, black flexible PVC cable
• RE3-BPT Bodypack
  • Frequency oscillation mode: Phase-locked loop (PLL)
  • Available band names, tuning bandwidths, and carrier frequency ranges
    • 5L: 36 MHz (488-524 MHz)
    • 5H: 36 MHz (560-596 MHz)
    • 6M: 10 MHz (653-663 MHz)
    • 8M: (823-865 MHz)*
    • T: 3 MHz (803-806 MHz)
    • *8M is split into two segments:
    • 823-832MHz: 9MHz
  • Sync frequency: Ultrasonic
  • RF power output
    • Frequency band specific: 5L (488-524MHz): Low 10mW / High 50mW
    • 5H (560-596MHz): Low 10mW / High 50mW
    • 6M (653-663MHz): Low 10mW / High 20mW
    • 8M (823-865MHz) 10mW
    • T (803-806MHz): Low 10mW / High 50mW
  • Display by: LCD + LED
  • Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, input level attenuation, RF power, auto off, key lock.
  • RF stability: <±10kHz@Fc
  • Modulation frequency shift: Wideband FM ±48kHz deviation
  • Harmonic radiation: <−50dBc
  • Input jack: 4-pin mini jack
  • Battery: 2 x AA alkaline battery or NiMH rechargeable battery
  • Charging contacts: Yes
  • Finish: Black polyurethane paint
  • Dimensions (without antenna)
    • Height: 3.2 in. (81.5mm)
    • Width: 2.54 in. (64.5mm)
    • Depth: 0.98 in. (25mm)
  • Net weight: 6.14 oz. (0.174 kg)
  • Gross weight: 8.29 oz. (0.235 kg)
• RE3-RX Receiver
  • Frequency Oscillation Mode: Phase-locked loop (PLL)
  • Carrier Frequency Range: 470 - 865 MHz (tuning bandwidth is band-dependent)
  • Sync Frequency: Ultrasonic 40 kHz
  • Diversity: Antenna diversity
  • Bandwidth: 36MHz
  • Signal/Noise Ratio: >100dB(A)
  • Total Harmonic Distortion (Thd): <0.6%@1kHz
  • Receiving Sensitivity: -81dBm for -12dB SINAD
  • Frequency Response: 63Hz~16kHz±2dB (BPT) 51Hz~16kHz±2dB (HHT)
  • Antenna Type: Detachable ½ wave with BNC connector
  • Antenna Booster Power: DC12 - 15V/100mA
  • Function Display By: LCD
  • Contents Of Display: Group, channel, frequency, antenna A/B, transmitter battery level, transmitter status (mute, live, or no sync), output level attenuation, AF indication, RF indication, key lock indicator.
  • Control Functions: Power, scan, frequency, group, channel, squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset.
  • Sync Data Options: Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch)
  • Audio Frequency Output Level: Ref：±22.5kHz Dev@1kHz Tone
  • ¼” (6.3mm) Phone Jack：-10dBV
  • XLR Jack：-4dBV(Line)、-24dBV(MIC)
  • Audio Frequency Output Impedance: 240Ω (unbalanced) 1400Ω (balanced)
  • Squelch and noise muting: Noise muting and tone code locking
  • Output Ports: 1 x balanced XLRM jack 1 x unbalanced ¼” TS (6.3mm) jack
  • Power Supply: DC12~15V/500mA
  • Finish: Black polyurethane paint
  • Dimensions
    • Width: 8.27 inch (210mm)
    • Height: (with feet attached) 1.85 inch (47mm)
    • Height: (without feet attached) 1.73 inch (44mm)
    • Depth: (including antenna jack) 6.89 inch (175mm)
    • Depth: (not including antenna jack) 6.1 inch (155mm)
    • Net Weight: 2.71 lbs [1.23 kg]
    • Gross Weight: 3.28 lbs [1.49 kg]

About Lavalier Microphones at Sound Productions

Lavalier microphones are miniature mics specifically engineered for capturing audio discreetly, while providing hands-free operation and flexibility of movement. Lav mics are also called lavs, lapel mics, clip mics, body mics, collar mics, neck mics, or personal mics. A great choice for stage use, their low-profile design also makes it easy to keep your audience’s focus on your performance.

Popular in TV, theater, interviews, and stage environments such as houses of worship or lecture halls, lavalier microphones are ideal for applications where you need hands-free versatility while maintaining optimal sound quality. Easy to camouflage, lavs are generally attached on or beneath clothing and can be clipped into hair for a virtually invisible mic placement for actors, singers, public speakers, and more. With options that are built to resist water, sweat, and makeup, lavalier mics are designed to deliver the quality and reliability you require, day after day.

Give your vocals great scope in a small package with lavalier microphones from Sound Productions. Lightweight and flexible, headworn mics come in a wide range of styles, polar patterns, and offer a variety of accessories to ensure you find the model that best fits your needs. Choose between an earset option (which rests on one ear) or a headset (which rests on both) for a secure, comfortable fit.