Bodypack UHF wireless set containing the HW3 supercardioid headworn microphone voice performance, presentations, and athletic instruction. The HW3's sound is crisp and natural, and the supercardioid polar pattern provides superb acoustic isolation and gain before feedback, making it an ideal microphone even in high SPL sound reinforcement applications.
Setup is quick and simple using the RE3 clear frequency scan and sync functions, and the radio link between the robust bodypack transmitter and diversity receiver delivers rock-solid system performance.
Electro-Voice RE3-BPHW System Features
- Wireless UHF bodypack set
- Includes supercardioid headworn microphone
- Ideal for vocal applications
- Quick and easy setup
- Rock-solid system performance
- HW3 Supercardioid Headworn Microphone1
- RE3-BPT Bodypack Transmitter1
- RE3-RX Diversity Receiver1
- Receiver antennas2
- Universal power supply1
- AA batteries2
- Receiver rack mounting hardware1
- Owner's manual1
- Documentation packet1
- Declaration of conformity1
- HW3 Headworn Mic
- Element type: Self-biased condenser
- Frequency response: 30 Hz - 18 kHz
- Polar pattern: Supercardioid
- Sensitivity: open circuit voltage. 1 kHz: 0.5 mV/Pascal (-47 dBV/PA)
- Maximum SPL: 130 dB SPL
- Impedance: 1000 ohms
- Power requirements: 3-9 VDC
- Polarity: Positive pressure on diaphragm produces positive voltage at pin 2 relative to pin 1
- Electrical contact pinouts
- Pin #1 - Ground, shield
- Pin #2 - Audio
- Pin #3 - Bias voltage
- Pin #4 - N/C
- Dimensions (cable length): 45.28" (1150 mm)
- Dimensions (boom length): 5.83" (148 mm)
- Net weight: 1.35 oz (38.4 g)
- Shipping weight: 5.93 oz (168 g)
- Microphone connector: 4-pin mini plug
- Head finish: Non-reflecting Black
- Material: Black stainless steel paintedadjustable headband frame. Moldedback facing connector joint with 2.5mm jack for detachable cable, blacktextured PU. Black painted steel 100mm x 4.5 mm flexible mic positingtube. Integrated black TPR mic shockmount. Clear soft silicone tubing atear contact points.
- RE3-BPT Bodypack Transmitter
- Frequency oscillation mode: Phase-locked loop (PLL)
- Available band names, tuning bandwidths, and carrier frequency ranges
- 5L: 36 MHz (488-524 MHz)
- 5H: 36 MHz (560-596 MHz)
- 6M: 10 MHz (653-663 MHz)
- 8M: (823-865 MHz)*
- T: 3 MHz (803-806 MHz)
- *8M is split into two segments:
- 823-832MHz: 9MHz
- 863-865MHz: 2MHz
- Sync frequency: Ultrasonic
- RF power output
- Frequency band specific: 5L (488-524MHz): Low 10mW / High 50mW
- 5H (560-596MHz): Low 10mW / High 50mW
- 6M (653-663MHz): Low 10mW / High 20mW
- 8M (823-865MHz) 10mW
- T (803-806MHz): Low 10mW / High 50mW
- Display by: LCD + LED
- Function controls: Power, mute, group, channel, frequency, sensitivity adjustment, input level attenuation, RF power, auto off, key lock.
- RF stability: <±10kHz@Fc
- Modulation frequency shift: Wideband FM ±48kHz deviation
- Harmonic radiation: <−50dBc
- Input jack: 4-pin mini jack
- Battery: 2 x AA alkaline battery or NiMH rechargeable battery
- Charging contacts: Yes
- Finish: Black polyurethane paint
- Dimensions (without antenna)
- Height: 3.2 in. (81.5mm)
- Width: 2.54 in. (64.5mm)
- Depth: 0.98 in. (25mm)
- Net weight: 6.14 oz. (0.174 kg)
- Gross weight: 8.29 oz. (0.235 kg)
- RE3-RX Diversity Receiver
- Frequency Oscillation Mode: Phase-locked loop (PLL)
- Carrier Frequency Range: 470 - 865 MHz (tuning bandwidth is band-dependent)
- Sync Frequency: Ultrasonic 40 kHz
- Diversity: Antenna diversity
- Bandwidth: 36MHz
- Signal/Noise Ratio: >100dB(A)
- Total Harmonic Distortion (Thd): <0.6%@1kHz
- Receiving Sensitivity: -81dBm for -12dB SINAD
- Frequency Response: 63Hz~16kHz±2dB (BPT) 51Hz~16kHz±2dB (HHT)
- Antenna Type: Detachable ½ wave with BNC connector
- Antenna Booster Power: DC12 - 15V/100mA
- Function Display By: LCD
- Contents Of Display: Group, channel, frequency, antenna A/B, transmitter battery level, transmitter status (mute, live, or no sync), output level attenuation, AF indication, RF indication, key lock indicator.
- Control Functions: Power, scan, frequency, group, channel, squelch, TX sensitivity, TX attenuation, TX RF power, TX auto off, TX key lock, TX display info, TX sync configuration, RX output volume, RX output level, RX antenna booster power, RX key lock, RX display contrast, RX display brightness, RX system reset.
- Sync Data Options: Frequency, group, channel, sensitivity level, attenuation status, RF power, auto off status, key lock status, transmitter display (freq or Gp/Ch)
- Audio Frequency Output Level
- Ref：±22.5kHz Dev@1kHz Tone
- ¼” (6.3mm) Phone Jack：-10dBV
- XLR Jack：-4dBV(Line)、-24dBV(MIC)
- Audio Frequency Output Impedance: 240Ω (unbalanced) 1400Ω (balanced)
- Squelch and noise muting: Noise muting and tone code locking
- Output Ports: 1 x balanced XLRM jack 1 x unbalanced ¼” TS (6.3mm) jack
- Power Supply: DC12~15V/500mA
- Finish: Black polyurethane paint
- Dimensions
- Width: 8.27 inch (210mm)
- Height: (with feet attached) 1.85 inch (47mm)
- Height: (without feet attached) 1.73 inch (44mm)
- Depth: (including antenna jack) 6.89 inch (175mm)
- Depth: (not including antenna jack) 6.1 inch (155mm)
- Net Weight: 2.71 lbs [1.23 kg]
- Gross Weight: 3.28 lbs [1.49 kg]
