The TX1122FM from Electro-Voice is a 12-inch, passive stage monitor ideal for use on small- to medium-sized stages where high-quality vocal and instrument applications are required in a lightweight package. This monitor boasts an innovative combination of transducers, rugged enclosure, and crossover technology to deliver compact, yet capable performance.
The TX1122FM is part of Electro-Voice’s Tour-X Series. TX floor monitors are designed to complement all full-range cabinets in this family with consistent voicing. The recessed input panel with dual NL4 connectors is located on the rear of the enclosure, which keeps the connectors hidden and away from the performers on stage.
Its internally-braced enclosure uses a combination of plywood and MDF and utilizes EV’s patent-pending Signal Synchronized Transducers—these align the woofer and compression driver by locating them on separate baffles and integrate a low distortion port between the baffles. This results in the acoustic centers of the woofer and compression driver being closer together, synchronizing arrival time; the voice coils of the compression driver and woofer are in the same plane, achieving linear phase response; and the size of both baffles are smaller than a single baffle; resulting in a smaller footprint. To top it off, the enclosure is finished with a black EVCoat for maximum strength while remaining lightweight.
Electro-Voice TX1122FM Features
- Two-way, high-output design
- Vented LF enclosure
- Neutrik Speakon® paralleled pass-through connectors
- Two integrated handles
- Ideal for small-to-medium stages
- Signal Synchronized Transducers™ for woofer/tweeter alignment
- Low-distortion SMX2121 woofer with fully symmetric drive
- 1.25" DH3/2010A titanium HF compression driver
- Constant-directivity 90º H x 50º V horn
- Integrated 24 dB/octave crossover with HF protection
- 99 dB sensitivity, 132 dB maximum SPL
- Power handling: 500 W continuous, 2000W peak
- Black EVCoat™ finish
- TX1122FM 12" 2-Way Passive Floor Monitor1
- Frequency Range (-10 dB) 55 - 20000kHz
- Flying No
- Minimum Impedance 6.4Ω
- Nominal Impedance (Passive) 8Ω
- HF Transducer DH3
- Speaker Type Monitor
- Woofer Size 12inch
- Powered or Passive Passive
- Frequency Response (-3 dB)¹ 70 - 20000Hz
- Max. SPL/1m (calc)² 132dB
- Coverage (Nominal -6 dB) H 90°
- LF Transducer SMX2121
- Coverage (Nominal -6 dB) V 50°
- Power Rating 2000W
- System Power Handling (Continuous/Program/Peak) 500Watts
- Rotatable Horn No
- Crossover Frequency 1600Hz
- Enclosure Material Ply Wood and MDF with EVCOAT
- Available Color Black
- Sensitivity 1 W/1 m 99dB
- Height 17.32" (440mm)
- Width 14.33" (364mm)
- Recommended High-Pass Frequency 60Hz
- Depth 22.56" (573mm)
- Internal Crossover Yes
- Weight Net 43.65 lbs (19.8kg)
- Family Tour X
- Input Connections Parallel Neutrik® NL4
More about Electro-Voice’s Tour-X Series
Building on Electro-Voice’s years of experience and expertise in designing premium-quality loudspeakers, the Tour X series is a unique, functional package of pro audio performance, versatility, and aesthetics. Each model of the TX series utilizes the DH3, which is a high-output 1.25-inch titanium compression driver and is coupled to a Constant Directivity 90° x 50° horn. This results in a smooth response and excellent pattern control in short to medium-throw applications. The integrated SMX2120 12-inch woofer has an FEA-optimized magnet structure and shorting ring for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep octave slopes with equalization for a smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.
