The ETC Desire D40 Vivid LED Par Wash Light is a x7 Color System array balanced for best all-around use as a high-intensity color-changing wash fixture.
It combines 40 Luxeon® Rebel emitters onto one unit, for bright, efficient lighting. The PAR-shaped washlight is a multipurpose tool that can be combined into a rig with conventional fixtures or used by itself. The user-interface on the rear of the unit puts the control in your hands - Desire luminaires can be managed by any RDM-enabled controller or on their own.
ETC Desire D40 Vivid LED Par Wash Light Features
- PAR-shaped washlight ideal as a multipurpose tool
- Can be combined into a rig with conventional fixtures or used by itself
- User-interface on the rear of the unit puts the control in your hands
- Combines 40 Luxeon® Rebel emitters onto one unit, for bright, efficient lighting
- Noiseless, fan-free convection cooling for acoustically sensitive installations
- Exclusive x7 color system combines a balanced recipe of seven led colors to give you the most color mixing options possible
- User-friendly interface with multiple modes and fixture settings
- Desire D40 Vivid LED Par Wash Light1
- Hanging yoke1
- 5 ft power cord1
- Media holder1
- Source
- LED details: 40 Lumileds LUXEON® Rebel LED
- Max lumens: 2252
- Lumens per watt: 21.9
- L70 rating (hours to 70% output): 50,000 hours
- Color
-
"
- Colors used: Red, Red-Orange, Amber, Green, Cyan, Blue, Indigo "
- Color temperature range: 2,700–6,500K
- Calibrated array: Yes
- Red shift: Yes
- Optical
- Beam angle range: 10°–71° (Secondary lenses available for multiple beam-spread options)
- Aperture size: 7.5"
- Pattern projection: No
- Pattern size: N/A
- Camera flicker control/Hz range: 900–25,000 Hz
- Control
- Input method: DMX512 via 5-pin XLR
- Protocols: DMX-512/RDM
- RDM configuration: Yes
- UI typ:e LCD
- Local control: Yes
- Onboard presets: Yes
- Onboard sequences: Yes
- Onboard effects: No
- Fixture-to-fixture control: Yes
- Notes: 15-bit virtual dimming engine
- Electrical
- Voltage range: 100–240 VAC 50/60 Hz
- Input method: Neutrik powerCON in and thru
- Inrush: 15A at 120V (First half-cycle); 40A at 240V (First half-cycle)
- Fixtures per circuit*: 9 (15 A power thru connector); 10 (R20 module or similar) (*All measurements are for 120 V, 60 Hz. Results may vary in different regions)
- Wattage typical: 103
- Current draw: 0.82A at 120V; 0.40A at 240V
- Thermal
- Ambient operating temp: -20°–40°C (-4°–104°F)
- Fan (controllable): No (N/A)
- Droop compensation: Yes
- dB range: N/A
- BTUs/hour: 351
- Physical
- Materials: Die-cast, all metal housing
- Color options: Black, white, silver, or custom color
- Mounting options: Yoke
- IP rating: IP20
- Weight: 6.4 kg (14 lb)
- Notes: Easy access slots for secondary lenses and standard 7.5 inch PAR acessories
- Warranty
- Fixture: 5 yrs
- LED array: 10 yrs
- Regulatory & Compliance
- Approved regulatory standards: UL 1573, CSA C22.2 No. 166, CE Compliant, EAC Compliant
- Dimensions (LxWxH)10.38x10.72x14.04" (264x272x357mm)