The Studio Tungsten array creates warm white light that mimics the performance of tungsten fixtures. This array contains 3000K LEDs for high-intensity, non-variable warm-white output. They look great in person and on camera.
The ETC Selador Desire D40XTI™ LED luminaire gives you the most flexible color mixing for your building. Featuring the x7 Color System™ - which combines up to seven colors at the source for the broadest color range available from an LED - the D40XTI is a rugged, durable fixture ETL 1598-rated for permanent indoor use and IP66-rated for long-term outdoor use.
Smooth dimming, all the way down to zero. The D40XTI features Selador Desire®-quality dimming capabilities, transitioning its intensity like a conventional fixture, without noticeable steps.
ETC Desire D40XTI Studio Tungsten Features
- Available in black, white, or silver finishes (only black pictured)
- Noiseless, fan-free convection cooling for acoustically sensitive installations
- Waterproof outdoor-rated power lead rugged, durable fixture ETL 1598-rated for permanent indoor use and IP66-rated for long-term outdoor use
- Desire D40XTI Studio Tungsten LED Par Wash Light1
- Hanging yoke1
- Termination board1
- Accessory ring (for installation of secondary lenses)1
- Source
- LED details: 40 Lumileds LUXEON® Rebel LED
- Max lumens: 5023
- Lumens per watt: 52.8
- L70 rating (hours to 70% output): 50,000 hours
- Color
- Colors used: White
- Color temperature range: 2,700–6,500K
- Calibrated array: No
- Red shift: Yes (not available on static-white)
- Optical
- Beam angle: 8°–17°
- Aperture size: 7.5"
- Pattern projection: No
- Pattern size: N/A
- Camera flicker control/Hz range: 900–25,000 Hz
- Notes: Secondary lenses available for multiple beam-spread options
- Control
- Input method: DMX512 via termination board
- Protocols: DMX-512/RDM
- RDM configuration: Yes
- UI type: None (configure via RDM)
- Local control: No
- Onboard presets: Yes
- Onboard sequences: Yes
- Onboard effects: No
- Fixture-to-fixture control: No
- Notes: 15-bit virtual dimming engine
- Electrical
- Voltage range: 100–240 VAC 50/60 Hz
- Input method: Waterproof, 72 in power lead; Requires power from non-dimmable source
- Inrush: 15A at 120V (first half-cycle); 40A at 240V (first half-cycle)
- Fixtures per circuit: 10 (15 A may be fed on same circuit); (*All measurements are for 120 V, 60 Hz. Results may vary in different regions)
- Wattage typical: 110
- Current draw: 1/0.5A
- Thermal
- Ambient operating temp: -20°–40°C (-4°–104°F)
- Fan (controllable): No
- Droop compensation: Yes
- dB range: N/A
- BTUs/hour: 375.32
- Physical
- Materials: Die-cast, all metal housing
- Color options: Black, white, silver, or custom color
- Mounting options: Single-pole mount, wall or square pole mount, twin fixture pole mount
- IP rating: IP66 for exterior, wet location use
- Weight: 6.8 kg (15 lbs)
- Notes: Cable diameter: Power 0.36 in / Data 0.34 in; Effective projected area (EPA): 0.74
- Warranty
- Fixture: 5 yrs
- LED array: 10 yrs
- Regulatory & Compliance
- Approved regulatory standards: cETLus Listed, Conforms to UL1598, Certified to CSA C22.2 No. 250.0, CE Compliant
- Dimensions (LxWxH)10.25x10.72x13.25" (260x272x337mm)
