Source Four LED Series 2 Lustr luminaires are based on the x7 Color System, utilizing seven colors including high-output lime to achieve true, usable broad-spectrum color with a depth and feel beyond any RGB fixture.
We put a twist of lime in the luminaire and mixed it all up. ETC's x7 Color System™ combines a balanced recipe of up to seven colors to create evocative color mixes. The Source Four LED Series 2 Lustr array takes the idea even further, with the addition of a lime-green LED emitter. Lime green increases the luminaire's lumen output in open white and lighter tints to make them brighter and livelier. The lime also enriches color-rendering by better marrying the red and blue ends of the color spectrum, for truer-to-life light that fills in the gaps ordinary LEDs leave behind.
ETC also added more red to the x7 Color System in the Source Four LED Series 2 Lustr array. Working in unison with the lime-green emitter, the extra red means the luminaire can produce ambers, straws and pinks up to three hundred percent as bright as those from the original Source Four LED™. The deeper, richer color from the Source Four LED Series 2 Lustr array will evoke the strongest audience reaction to your sunset, moonlight and dramatic scenes.
ETC Source Four LED Series 2 Lustr Ellipsoidal Features
- Up to nine fixtures (15A max) may be linked via power thru connector (10 fixtures total per circuit) when used with R20 Relay Module or Unison Echo Relay Panel
- Multiple control options, including Direct, RGB, HSIC, and console-free modes
- 15-bit virtual dimming engine for smooth fades and minimal color shift during dimming
- ETL Listed to UL1573; IP20 rated
- Positive locking double-clutch fixture body
- Slot for glass or stainless-steel patterns and soft-focus diffuser
- Wide accessory slot with sliding cover for motorized pattern device or iris
- Source Four LED Series 2 Lustr LED Ellipsoidal1
- Hanging yoke1
- 1.5 m power cable1
- Soft-focus diffuser in an A-size gobo holder1
- Gel frame 1
- Source
- LED details: 60 Lumileds LUXEON® Rebel LED
- Max lumens: 8667
- Lumens per watt: 51.9
- L70 rating (hours to 70% output): 50,000 hours
- Color
- Colors used: : Red, Amber, Lime, Green, Cyan, Blue, Indigo
- Color temperature range: 2,700–6,500K
- Calibrated array: Yes
- Red shift: Yes (can be disabled)
- Optical
- Beam angle range: Swappable lens tubes between 5°–90°
- Gate Size: 80mm
- Aperture size: 6.25–14 in (depending on lens tube)
- Pattern projection: Yes
- Pattern size: A or B
- Camera flicker control/Hz range: 900–25,000 Hz
- Notes: Can be used with LED CYC and Fresnel adapters
- Control
- Input method: DMX512 via 5-pin XLR
- Protocols: DMX-512/RDM
- RDM configuration: Yes
- UI type: LCD
- Local control: No
- Onboard presets: Yes
- Onboard sequences: Yes
- Onboard effects: No
- FixtureLink: Yes
- Notes: 15-bit virtual dimming engine
- Electrical
- Voltage range: 100–240 VAC 50/60 Hz
- Input method: Neutrik powerCON in and thru, requires power from a non-dimmable source
- Inrush: 50A at 120V (First half-cycle); 107A at 240V (First half-cycle)
- Fixtures per circuit: 9 Lustr or 7 Daylight HD/Tungsten HD (15 A via power thru connector); 10 Lustr or 8 Daylight HD/Tungsten HD (via R20 module or Echo Relay Panel)
- Wattage typical: 167
- Current draw: 1.44A at 120V; 0.78A at 240V
- Thermal
- Ambient operating temp: 0°–40°C (32°–104°F)
- Fan (controllable): Yes (yes)
- Droop compensation: Yes
- dB range: 22.5 dBA average at 1 m
- BTUs/hour: 569
- Physical
- Materials: Die-cast, all metal housing
- Color options: Black, white, silver, or custom color
- Mounting options: Yoke, cyc floor stand (sold separately)
- IP rating: IP20
- Weight: With barrel: 8.3 kg (18.3 lbs); Without barrel: 6.5 kg (14.3 lbs)
- Warranty
- Fixture: 5 yrs
- LED array: 10 yrs
- Regulatory & Compliance
- Approved regulatory standards: cETLus Listed; Conforms to UL1573; Certified to C22.2 C22.#166; CE Compliant
- Dimensions (LxWxH)24.8x13.3x17.1" (631x338x434mm)
