Focusrite RedNet X2P Dante Audio Interface

Compact and portable with a protective chassis, take the RedNet X2P with you for any audio engineering needs.

RedNet X2P is a 2x2 Dante™ audio interface with the ability to effortlessly add a high quality Dante interface of your own over an Ethernet cable, simply use a power over Ethernet switch or PoE injector. If all you have for your sound studio is a computer with an Ethernet port, you can still get setup in this Dante interface. Pristine audio clocking synchronizes this tabletop interface with other equipment in use. Including two Red Evolution mic preamps, this interface has the low latency and classic Focusrite sound of early models.

Get a high level of control over your sound when you add this interface to your equipment. Use features such as Air mode, phase invert, phantom power and stereo linking, crossfader, high-pass filter, and more. Must-have controls, such as for gain, are also on the top panel of the interface. Multiple input and output functions tailor sound to meet your needs as well as allowing connection of various equipment. Connect mic, line, or instrument level signals to the mic pres through a pair of combo XLR/1/4” inputs. Turn on control lockout mode so settings cannot be changed remotely.

Each channel’s controls can be accessed from the top panel. An LED screen alerts you to the status of several operations, displaying input levels for channels one and two, and the master output level. The Monitor section gives the option to solo the input channels or mute the mix, providing volume control over line outputs. Both low and high impedance headphones work in the dedicated headphone amp with volume control. An input mix blender knob is one of the best aspects of the RedNet X2P controls. This lets you adjust the relative levels of analog inputs and audio coming back from the network for monitoring purposes.

Focusrite Pro RedNet X2P Features

• Stereo 2x2 audio interface for Dante Audio-over-IP networks
• Two Red Evolution mic preamps for mic, line or instrument level inputs
• Power-over-Ethernet supplied
• Up to 24-bit, 96kHz sampling rates
• Local input mix to allow 'more-me' style monitoring for easy foldback control
• Powerful headphone output even with high-impedance headphones
• Up to 24dBu line output levels
• Independent level control of headphone and line outputs
• Mute switch for line output
• Integrated network switch allowing daisy-chaining of network devices
• AES67 compliant
• 3 Year Focusrite Warranty

• RedNet X2P audio interface1
• Brainworx bx_console Focusrite plug-in1

• Supported sample rates
  • 44.1kHz
  • 48kHz
  • 88.2kHz
  • 96kHz
• Microphone / line inputs
  • Gain range: 0dB to 68dB in 1dB steps
  • Max input level: >+24dBu, min gain
  • Frequency response: 20Hz - 35kHz ±0.1dB
  • THD+N: -103dB (0.0007%) @ -1dBFS (@ 24dB Gain)
• Instrument inputs
  • Gain range: 0dB to 68dB in 1dB steps
  • Max input level: ->+15dBu, min gain
  • Frequency response: 20Hz - 35kHz ±0.1dB
  • THD+N: <-100dB (0.001%) @ -1dBFS (@ 16dB Gain)
• Line level outputs
  • 0 DBFS reference levels: +18 or +24dBu (switchable)
  • Frequency response: 20Hz - 35kHz ±0.1dB
  • THD+N: <-104dB (0.0006%) @ -1dBFS
  • Dynamic range: -120dB 'A'-Weighted (typical), 20Hz - 20kHz
• Headphone output
  • 0 DBFS reference levels: >+19dBm
  • Frequency response: 20Hz - 20kHz ±0.2dB
  • THD+N: <-103dB (0.0007%) @ -1dBFS
  • Dynamic range: 117dB 'A'-weighted (typical), 20Hz - 20kHz
  • Output impedance: 5O
  • Impedance: 32O - 600O